Add 50mm to each side of your RX-7 FC’s front end. Super deep dish wheels are now possible.
This is a brand new part to the UK and has never been available before brought to you by Essex Rotary. Up till now the largest available from a UK seller has been +30mm each side. Our new Fibreglass Over Fenders add a massive 50mm extra to each side , giving your FC3s a wide aggressive look. These are made here in the UK for Essex Rotary using high quality British fibreglass and finished in flexible white gelcoat, with out signature Essex Rotary Green finish on the inside. Made to a high standard so fit to your car will not be a problem, saving you time, money and headache. No one likes a bad fitting part.

Thin But Strong
Our new Super Wide Over Fenders are made thin enough to be flexible, this helps with fitting and conforming to the shape of your RX-7 while remaining thick enough to be strong. You will get 1 set (one left and one right) front over fender.

While DIY Installation is possible, Essex Rotary recommend installation be carried out by a professional, Always test fit fibreglass parts and trim (if required) to your preference prior to painting.

Add 50mm to each side of your RX-7 FC’s rear end. Super deep dish wheels are not possible

This is a brand new part to the UK and has never been available before brought to you by Essex Rotary.

Up till now the largest available from a UK seller has been +30mm each side.

Our new Fibreglass Over Fenders add a massive 50mm extra to each side , giving your FC3s a wide aggressive look.

These are made here in the UK for Essex Rotary using high quality British fibreglass and finished in flexible white gelcoat. with out signature Essex Rotary Green finish on the inside.

Made to a high standard so fit to your car will not be a problem, saving you time, money and headache.

No one like a bad fitting part.

Thin But Strong

Our new Super Wide Over Fenders are made thin enough to be flexible, this helps with fitting and conforming to the shape of your RX-7 while remaining thick enough to be strong.

You will get 1 set (one left and one right) rear over fender, please note this kit does not include a fuel filler cap extension.

Essex Rotary recommend installation be carried out by a professional, Always test fit fibreglass parts and trim (if required) to your preference prior to painting.

It will also fit much better on upgraded fuel pumps like the Aeromotive Stealth 340 fuel pump we offer.

The original fuel pre filter can become contaminated, and even go hard (from minerals in the fuel crystallising as the fuel evaporates over time)  in vehicles that have been left for extended periods of time with little or no fuel in them, this may contribute to reduced fuel flow at high load, when your engine really needs it.

The pre-filter also helps protect your fuel pump from harmful debris large enough to damage the internal parts of the pump.

We recommend replacing your pre filter if your replacing your fuel pump especially if your going to be installing one of the Aeromotive Stealth 340 fuel pumps or similar.

Keep your fuel system in great shame with our new fuel pump pre filter.

FREE DELIVERY IF OFFERED ON THIS PART

Made from high quality fibreglass and finished in black gelcoat this part is designed for easy installation. and to look great.

Please note that for best results this part will require preparation and painting before install. Essex Rotary Always recommend test fitting your part and adjusting the fit to your satisfaction prior to having your new FRP parts painted at a bodyshop.

Installation is easy with either double sided tape of screws (not sopplied with this part)

Lightweight and great looking we have these on an introductory offer, right now at £49.99 normal price will be £74.99

PLEASE NOTE THAT THIS PART WILL ONLY FIT THE SERIES 1 RX-8 MADE FROM 2003-2008, IT WILL NOT FIT THE THE REAR BUMPER OF THE R3,

Made from high quality fiber glass in the UK this front bumper is designed with a “Kit Fit Lip”

Kit Fit Lip
Our Kit Fit Lip allows for perfect fitment even if your stock body panels are out of line a little.
Something that is all too often the case on Vehicles the age of the RX-7.
It is designed to be shaved down where needed to achieve a perfect fit according to your panel alignment. Fitment is recommended to be carried out by a professional. though with some time, the right tools and some patience these bumpers can be fitted at home by someone with competent skill.

DO NOT SIMPLY SHAVE THE WHOLE FIT LIP OFF PRIOR TO INSTALLATION AS YOU WILL BE LEFT WITH LARGE GAPS IN SOME AREAS. 

Please allow up to 3 weeks for delivery of this part if out of stock.

Image is for illustration purposes only

Made from high quality fiber glass in the UK this front bumper is designed with a “Kit Fit Lip”

Fitment is recommended to be carried out by a professional. though with some time, the right tools and some patience these bumpers can be fitted at home by someone with competent skill.

We are pleased to offer a combined discount to customers who may want to order both out 99-sped front bumper and front lip. please view out other item for the bundle price.

Please allow up to 3 weeks for delivery of this part if out of stock.

With the right Eibach Pro-Spacers installed, your car takes on a more aggressive look, with the wheels and tires—filling the wheel arches exactly the way they should.

Fine-tuning your track width doesn’t just enhance your car’s looks it also gives you improved handling performance and optimized roll characteristics. The 20mm Pro-Spacers will let you position your tyres exactly where they will look and perform their best. In many cases, installing the right Pro-Spacers can improve the look and function of your existing wheels and tyres so much, you might not need to buy new custom wheels and tyres at all.

Price quoted is for a pair of Eibach Hubcentric Pro-Spacers.

Please Select your desired size and delivery option in the drop down menu beside the price above.

Please note that these spacers only come in a 5 stud pattern

With a 100A output and and OEM quality fitment your all set to power up your FC Turbo II once again.

This item can take up to 28 days for delivery once ordered. though typical delivery times are much quicker.

With a 100A output and and OEM quality fitment your all set to power up your FD once again.

This item can take up to 28 days for delivery once ordered. though typical delivery times are much quicker.