Plus we are offering  5% Discount when purchasing this pack compared to purchasing everything individually.

This Kit Contains the following;

• 2 x 5 Litre bottles of Evans Prep Fluid.
• 2 x 5 Litre bottles of Evans Power Cool 180 Waterless Coolant.

This is the perfect starter pack to carry our a full conversion offered with a great bulk shipping discount.

Before using Evans Waterless coolant for the first time it is advised that Evans Prep fluid is used to flush the cooling system of ay remaining water based coolant, This is essential for a successful conversion to Evans Waterless coolant.

For more information on Prep Fluid and Power Cool 180 can be found in their individual product descriptions above.

Evans Prep Fluid is specifically formulated to hygroscopically absorb any water-based coolant remaining in the cooling system after initial drain. Because certain parts of the cooling system might not drain out with gravity, and it would take too long to disconnect every pipe etc., installing a scavenging fluid is the most practical method of removing all the water-based coolant.

The Prep Fluid is not formulated to chemically clean the engine of rust and scale, but the process of circulation and draining will help remove any loose sediment.

Evans Prep Fluid must be used before converting from a water based coolant to Evans Waterless Engine Coolant.

2 x 5 Litre cans will be required to fill a full cooling system of most RX-7′s or RX-8′s
We are offering a Discounts for 2 bottle packs plus combined delivery discount if buying two bottles together to be shipped to a UK Mainland address, Simply select your desired quantity from the drop down menu.

Conversion from a water-based coolant to Evans is a straight forward process that can be undertaken by anyone with some basic experience in engine mechanics.

The primary objective of converting to Evans Waterless Engine Coolant is to eliminate all of the problems associated to water:

Eliminates Overheating
Evans Waterless Coolants have a boiling point above 180°C and will not vaporise, thus eliminating overheating, boil-over and after-boil.

Reduces Pressure
Evans Waterless Coolants generate very low vapour pressures reducing strain on engine hoses and cooling system components.

Prevents Corrosion
Water promotes corrosion via oxidation and electrolysis. Evans Waterless Coolants contain no oxygen and are virtually non-conductive effectively preventing corrosion.

Maximise BHP
Evans Waterless Coolants eliminate pre-ignition and detonation caused by overheating – thus increasing combustion efficiency and delivering more power.

Stops Erosion
Evans Waterless Coolants stop cavitation and eliminate liner and cooling pump erosion.

Freeze Protection
Evans Waterless Coolants freeze below -40ºC

Non-Toxic
Evans Waterless Coolants are proven to be Non-Toxic. Standard anti-freeze is toxic and known to kill pets.

If the engine to be converted is currently filled with a water-based coolant an important part of a good installation is using Evans Prep Fluid. Prep Fluid is specifically formulated to purge remaining water-based antifreeze from the system after initial drain. Evans Prep Fluid is sold separately and available just below.

2 x 5 Litre cans will be required to fill a full cooling system of most RX-7′s or RX-8′s
We are offering a Discounts for 2 bottle packs plus combined delivery discount if buying two bottles together to be shipped to a UK Mainland address, Simply select your desired quantity from the drop down menu.

Construction is held to tight quality control standards that are illustrated in the outstanding Heliarc soldering, pristine tube and fin alignment, and mirror-like surface finish. The tubes, fins, headers, and brackets are brazed in a state-of-the-art Nocolok furnace, which bonds these components into a virtually indestructible radiator unit.

All fan mounts are situated to OE specifications, and using the OEM mounting locations facilitates fitment into the RX-7.

Specifications:
16-3/4″ H x 22″ W x 1-7/8″ TH
- MT only – Auto transmission models required the installation of an external transmission oil cooler.

Koyo USA Part Number – HH063144

Special order item only, please contact us in advance prior to ordering as these can take up to 3 months as they are normally made to order.

• High-flow fan provides 1850 cfm of airflow
• Universal fitment
• Compact design with a diameter of 406 mm and an overall thickness of only 73 mm provides increased engine bay space
• Easily reversible for use as a pusher or puller fan
• Mishimoto Lifetime Warranty

Specs

• Housing Diamiter – 16.75″
• Fan Diamiter – 385mm
• Blade Diameter – 15.375″
• CFM Rating – 1850cfm
• Fan Speed – 1800rpm
• Current – 34.0A (inrush)
• Current – 7.18A (normal)
• Voltage – 12volts

• High-flow fan provides 1300 cfm of airflow
• Universal fitment
• Compact design with a diameter of 328 mm and an overall thickness of only 63.5 mm provides increased engine bay space
• Easily reversible for use as a pusher or puller fan
• Mishimoto Lifetime Warranty

Specs

• Housing Diamiter – 14.75″
• Fan Diamiter – 328mm
• Blade Diamiter – 12.875″
• CFM Rating – 1300cfm
• Fan Speed – 2200rpm
• Current – 15.1A (inrush)
• Current – 7.8A (normal)
• Voltage – 12volts

• High-flow fan provides 1150 cfm of airflow
• Universal fitment
• Compact design with a diameter of 305 mm and an overall thickness of only 63.5 mm provides increased engine bay space
• Easily reversible for use as a pusher or puller fan
• Mishimoto Lifetime Warranty

Specs

• Housing Diamiter – 12.5″
• Fan Diamiter – 285mm
• Blade Diamiter – 11″
• CFM Rating – 1150cfm
• Fan Speed – 2000rpm
• Current – 12.7A (inrush)
• Current – 7.6A (normal)
• Voltage – 12volts

• High-flow fan provides 950 cfm of airflow
• Universal fitment
• Compact design with a diameter of 255 mm and an overall thickness of only 60 mm provides increased engine bay space
• Easily reversible for use as a pusher or puller fan
• Mishimoto Lifetime Warranty

Specs

• Housing Diamiter – 11.5″
• Blade Diamiter – 255mm
• CFM Rating – 950cfm
• Fan Speed – 2300rpm
• Current – 13.08A (inrush)
• Current – 6.8A (normal)
• Voltage – 12volts

Take full control of your electric cooling fan with the Mishimoto Adjustable Fan Controller Kit! This kit is applicable for any 12v electric fan and includes all necessary components for installation. This kit can be purchased with a probe-style temperature sensor or with a 1/8″ NPT thread-in sensor to fit the needs of any project. The Mishimoto Fan Controller features adjustable activation from 66°C to 116°C and deactivates once temperatures are reduced by 6°C. This controller includes a built-in A/C override feature and is designed for use with 1–2 electric fans drawing a combined 25 amps or less. The Mishimoto Adjustable Fan Controller Kit includes the Mishimoto Lifetime Warranty.

Adjustment is simple via means of a slot head screwdriver to adjust the dial on the control box.

• Applicable for any vehicle with a 12v electric fan
• Adjustable activation temperature from 66°C to 116°C
• Includes probe or 1/8″ NPT style temperature sensor to fit your needs
• Includes 7 ft of wire for installation in nearly any size vehicle
• Built-in A/C override feature
• Designed for use with 1–2 electric fans drawing a combined 25 amps or less
• Includes wiring connectors and hardware for installation
• Mishimoto Lifetime Warranty

Essex Rotary would recommend the selection of the the 1/8th npt sensor over the probe style. The sensor can be installed in to a hose adapter like the Mishimoto hose adaptor.

A coolant specially selected for your rotary engine by the team here at Essex Rotary
Each bottle contains 5 liters of premixed coolant ready to go. A normal coolant change will require 2 bottles (10 liters in total) this should be more then enough to cover any rotary model you may have.