This is the standard stuff that we normally use on our services, offering a higher viscosity than the recommended oil, 15w40 will help protect the inside of your engine better especially the stationary gear bearings (a key weak point on the RX-8 when using 5w30)
This oil is supplied in a 5 liter can and should be enough for a oil change plug 1-1.5 liters spare for top ups.
We recommend 3000-6000mile (or 6 months) oil changes to keep your oil as clean as possible.
Larger quantities are available please contact us for pricing
HKS Hybrid Oil Filter with Neodymium Magnet
The filter with integral Neodymium Magnet technology inside
A new concept oil filter which improves oil pressure drop and flo ...
The filter with integral Neodymium Magnet technology inside
A new concept oil filter which improves oil pressure drop and flow properties by approximately 30% compared to current sports oil filters. Large diameter of "Super Intake Hole" and newly developed low resistance hybrid filter allow low pressure loss. Engine response is alos improved by reducing the stress on the engine.
Most sports oil filters are prerequisite for using the high viscosity oil and therefore filter paper strength is prioritized whilst sacrificing absolute pressure loss properties. HKS Hybrid Sports Oil Filter has readdressed filter strength and overall structure to provide the oil flow that the engine requires and pursue HKS' ideals in what is required from a sports oil filter.
TRUST GReddy OX Oil Filter
GReddy Sports OX Oil Filters use “double pleats” folding technology on the inner filter to provide a maximum filtration surface for cont ...
GReddy Sports OX Oil Filters use “double pleats” folding technology on the inner filter to provide a maximum filtration surface for contaminant removal. It is also very durable and easily removed. Ideal for GReddy Oil, Oil Coolers, and Oil Filter Relocation kits.
Suitable for both RX-8 and RX-7 applications.
Oil Filter
Standard replacement oil filter for your FD3s or RX-8 (series 1)
These filters are OE spec but brand may vary
Always handy to have aroun ...
Standard replacement oil filter for your FD3s or RX-8 (series 1)
These filters are OE spec but brand may vary
Always handy to have around, dont forget to add one on to your oil purchase if your purchasing oil too
Picture for illustration purposes only.
If you have an R3 please purchase our R3 oil filter
NGK Spark Plugs for RX-7 FC EGI BR10ET
Set of 4 Genuine NGK Spark Plugs for your RX-7 FC3s EGI the part number for these plugs is BR10ET
Essex Rotary are please to offer this high quality gear oil from Royal Purple in the USA. Selected for your Gearbox needs.
Max Gear is an ultra-tough, high performance automotive gear oil designed to provide maximum protection to heavily loaded gears while maximizing power throughout the drive train. Max Gear outperforms ordinary gear oils by combining the highest quality synthetic oils with Royal Purple’s proprietary Synerlec additive technology. Max Gear makes gears run smoother, quieter, cooler and longer without overhauls. Max Gear is formulated with a friction modifier additive – no additional additives are necessary.
Performance Advantages
Maximizes horsepower
Extends gear and bearing life
Reduces operating temperature
Severe service performance
Lower coefficient of friction
Superior corrosion protection
Separates rapidly from water
Environmentally responsible
Each bottle is 1 US Quart (0.946L) You will Require 2-3 Bottles for your gearbox depending on modelDont forget to check out our Other offerings from Royal Purple including TCWIII Premix and Royal Purple ICE Coolant Addative.
Royal Purple Max EZ Power Steering Fluid
Max EZ is an advanced power steering fluid designed to maximize the life and performance of all power steering units.
Max EZ is formulate ...
Max EZ is an advanced power steering fluid designed to maximize the life and performance of all power steering units.
Max EZ is formulated with a blend of select synthetic base oils plus Royal Purple’s proprietary Synerlec additive technology, which is proven to make equipment run cooler, smoother, longer, quieter and more efficiently.
Max EZ is compatible and can be mixed with conventional power steering fluids and has excellent seal compatibility.
Performance Advantages
Greater wear protection
Clean, efficient equipment
Extended pump life
Much longer fluid life
Non-foaming
Outstanding rust / corrosion protection
High temperature service capability
Each Bottle contains 12fl/oz of Max EZ Power steering fluid
Trust GReddy Neodymium Magnetic Drain Plug
The GReddy Magnetic Oil Drain Plug is a powerful 5000 gauss neodymium magnet. The Neodymium magnet is one of the most powerful magnet on ...
The GReddy Magnetic Oil Drain Plug is a powerful 5000 gauss neodymium magnet. The Neodymium magnet is one of the most powerful magnet on the market.
This hard anodized aluminum drain plugs is compatible with most modern Mazda cars oil pans but we specificly stock it for the RX8 and RX7 FC/FD (please check your thread size on FB series oil pans and we will be happy to confirm fit).
By using the "GReddy Magdrain" plug, you can help reduce the amount of abrasive materials in your engine, while extending the life of your engine.
A simple but effective mod that can be carried out at any oil change, you will be surprised what gets picked up
In stock and ready for speedy UK delivery
NGK Spark Plugs for RX-7 BUR9EQP
Set of 4 Genuine NGK Spark Plugs for your RX-7 FD3s the part number for these plugs is BUR9EQP
Finally! Rotary Engine Formula Motor Oil with Ionic Bonding Technology specially formulated to meet the needs of the high performance Rotary Engine.
This unique Motor Oil Specifically meets the needs of the Rotary Engine by offering the following advantages:
•Offers Greater General Protection for the internals of your Rotary engine when either hot or cold
•Improves Performance reliability & Longevity
•Ionic Bonding Completely Eliminates Dry Starts
•Withstands Temps 100°C greater than Synthetics
•Long Life, Slow Burning High Performance Mineral
•10w30 5 Litre Bottle
Synionic's patented technology utilizes ionic bonding technology to offer extreme pressure protection, which reduces temperatures, slowing burn rate, while also being able to withstand temperatures in excess of 450 degrees. In addition to these benefits is the additional safe guard deriving from the ionic bonding, that being the fact that should your oil levels decrease substantially, there still remains a protective coating over your engine which protects even when your bulk oil levels have dropped.
High Flow RX-7 Panel Filter by K&N
High flow air filter for your RX7, serviceable every 50'000 miles this filter never needs replacing. ...
Cataclean is a rotary engine safe treatment that is simple to use.
Cataclean is primarily designed to help lower emissions and is very successful if your having trouble passing your MOT on emissions grounds, while this product cannot fix a broken fan it can breath new life in to a good catalytic converter that is not working at its best.
Used in a rotary engine it can also help keep carbon build up at bay, something we all know can be a killer of compression if your RX is not driven hard.
We recommend its used twice yearly for best results.
Comma Super Longlife Coolant/Antifeeze 5L
5 Year Service Life
In an industry where its becoming more and more confusing to select something as simple as coolant for your car Essex R ...
5 Year Service Life
In an industry where its becoming more and more confusing to select something as simple as coolant for your car Essex Rotary have made it simple. We have carefully selected this super long life coolant for is compatibility with the materials that make up your Mazda Rotary engine. Premixed to reduce mess and minimize hassle.
A coolant specially selected for your rotary engine by the team here at Essex Rotary
Each bottle contains 5 liters of premixed coolant ready to go. A normal coolant change will require 2 bottles (10 liters in total) this should be more then enough to cover any rotary model you may have.
Comma DOT5.1 High Performance Brake Fluid 1L
Fully synthetic high boiling point brake fluid that is fully compatible with DOT3 and DOT4 Brake fluids recommended by Mazda.
DOT5.1 ...
Fully synthetic high boiling point brake fluid that is fully compatible with DOT3 and DOT4 Brake fluids recommended by Mazda.
DOT5.1 Brake fluid has a much higher boiling point then both DOT3 and DOT4 fluids making it an excellent alternative when renewing your brake and clutch fluid. as well as being very affordable when compared to many other high performance "race spec" fluids
We have been using this brake fluid in our own cars for many years with no issue even on long stints on track or drives through mountain passes where a lot of braking is required.
1 bottle should be sufficient to renew your brake system, however 2 bottles are usually recommended if your changing from a different fluid such as DOT3 or DOT4.
Specs:
Type : 100% Synthetic
Dry Boiling Point : 275℃
Wet Boiling Point : 183℃
Volume Per Bottle : 1000ml
Idemitsu Racing Rotary Engine Oil 10w30 (Full Synthetic)
A Full Synthetic Oil SAFE for your Rotary Engine
Do you feel that yo ...
A Full Synthetic Oil SAFE for your Rotary Engine
Do you feel that you aren’t getting the power you should be from your rotary engine? Are you experiencing bearing wear under severe (or possibly under not-so-severe) operating conditions? If so, you may be using the wrong engine oil. Idemitsu 10W-30 can reduce or even eliminate some of the problems you may be having.
As the developer of the engine oil for the winning 1991 LeMans Mazda 787B and a long time supplier of vital lubricants to Mazda, Idemitsu has intimate knowledge of the requirements of rotary engines.
With the precise base oil mix of PolyAlphaOlephins and PolyEsters, Idemitsu Rotary Engine Oils are able to minimize those deposits on your apex seals.
Allows for better sealing of the chamber, facilitating more power generation.
Extends the life of turbochargers by reducing bearing coking.
Specially developed additives facilitate even tooth load on the front stationary gear to allow for higher loads and higher RPM.
Premium anti-wear agents create a strong film between the main bearings and the eccentric shaft, reducing metal-to-metal contact and minimizing bearing wear.
Developed to reduce entrained gas generation. Entrained gases reduce the oils ability to prevent metal-on-metal contact, thereby increasing main bearing wear.
Includes Molybdenum as a friction modifier. This compound reacts with the metal surfaces to create a low-shear boundary. The low shear characteristic reduces friction, increasing efficiency and power output.
A full synthetic oil specially formulated for your rotary engine from Idemitdu
Each Bottle contains 1 US Quart of Oil
Idemitsu Racing Rotary Engine Oil 20w50 (Full Synthetic)
A Full Synthetic Oil SAFE for your Rotary Engine
Do you feel that yo ...
A Full Synthetic Oil SAFE for your Rotary Engine
Do you feel that you aren’t getting the power you should be from your rotary engine? Are you experiencing bearing wear under severe (or possibly under not-so-severe) operating conditions? If so, you may be using the wrong engine oil. Idemitsu 20W-50 can reduce or even eliminate some of the problems you may be having. As the developer of the engine oil for the winning 1991 LeMans Mazda 787B and a long time supplier of vital lubricants to Mazda, Idemitsu has intimate knowledge of the requirements of rotary engines.
With the precise base oil mix of PolyAlphaOlephins and PolyEsters, Idemitsu Rotary Engine Oils are able to minimize those deposits on your apex seals.
Allows for better sealing of the chamber, facilitating more power generation.
Extends the life of turbochargers by reducing bearing coking.
Specially developed additives facilitate even tooth load on the front stationary gear to allow for higher loads and higher RPM.
Premium anti-wear agents create a strong film between the main bearings and the eccentric shaft, reducing metal-to-metal contact and minimizing bearing wear.
Developed to reduce entrained gas generation. Entrained gases reduce the oils ability to prevent metal-on-metal contact, thereby increasing main bearing wear.
Includes Molybdenum as a friction modifier. This compound reacts with the metal surfaces to create a low-shear boundary. The low shear characteristic reduces friction, increasing efficiency and power output.
A full synthetic oil specially formulated for your rotary engine from Idemitdu Each Bottle contains 1 US Quart of Oil
Idemitsu Racing Rotary Premix
Possibly The Best Rotary Premix You Can Buy
Inherently with many rot ...
Possibly The Best Rotary Premix You Can Buy
Inherently with many rotary engines, the entirety of the rotor and housing are not being sufficiently lubricated, resulting in premature wear or damage. In order to increase lubrication within the rotary, Idemitsu developed Idemitsu Rotary Premix. At 1/2 oz per gallon of fuel, it is a cost effective way lubricate more of your engine and prevent premature catastrophic damage.
A special blend of base oils reduces deposits and subsequent exhaust port clogging. As a result, your rotary will maintain the power at which it was designed.
Special detergent/dispersant additives keep you fuel injectors clean to reduce maintenance.
Provides additional lubrication for apex and side seals to increase seal life and increase efficiency of engine.
Special additives allow for better sealing of the chamber, creating greater efficiency and more power.
Idemitsu Lubricants America Corporation recommends the use of the Ratio Rite Measuring cup to ensure a proper mixture of Premix Rotary Fuel Lube and gasoline.
A full synthetic oil specially formulated for your rotary engine from Idemitdu Each Bottle contains 1 US Quart of Oil
Pack discounts for 6 bottle packs and 12 bottle packs can be purchased via our Idemitsu Shop
Idemitsu Racing MTF/Gear Oil 75w90 (for Gearbox)
Race Proven Gearbox Oil from Idemitsu
This formulation has been spec ...
Race Proven Gearbox Oil from Idemitsu
This formulation has been specifically engineered to provide maximum performance and protection for engines under severe racing conditions. Built on a tradition of excellence by IDEMITSU, this technology is derived from decades of experience formulating premium lubricants for Japanese auto manufacturers.
Formulated Specifically For High Performance Gearboxes
Enhanced Film Strength Provides Excellent Durability and Wear Protection
Advanced Extreme Pressure Additive Package Improves Performance Under High Load Conditions
Superior Shear Stability Ensures Viscosity Retention Under High Stress Operations
Provides Smooth Shifting Across All RPMs
Each bottle contains 1 US quart of oil, please note you will require the following amounts for each kind of gearbox
2 Bottles for RX-8 6 speed gearbox inc the R3
3 Bottles for RX-8 5 Speed Gearbox and RX-7 FD Gearbox
Fuel Filter for RX-7 FC
Quality replacement fuel filter for your RX-7 FC3s ...
Quality replacement fuel filter for your RX-7 FC3s
Idemitsu Racing Rotary Engine Oil 10w30 (Full Synthetic) 6 Pack
Save on a 6 bottle pack plus combined Shipping. Save £27.94 on this pack, This pack works out at £15.00 per bottle A Full Synthetic Oil SAFE for your Rotary Engine
This should be enough oil for your to carry out an oil change and have spare to top up with.
Do you feel that you aren’t getting the power you should be from your rotary engine? Are you experiencing bearing wear under severe (or possib ...
Save on a 6 bottle pack plus combined Shipping. Save £27.94 on this pack, This pack works out at £15.00 per bottle A Full Synthetic Oil SAFE for your Rotary Engine
This should be enough oil for your to carry out an oil change and have spare to top up with.
Do you feel that you aren’t getting the power you should be from your rotary engine? Are you experiencing bearing wear under severe (or possibly under not-so-severe) operating conditions? If so, you may be using the wrong engine oil. Idemitsu 10W-30 can reduce or even eliminate some of the problems you may be having.
As the developer of the engine oil for the winning 1991 LeMans Mazda 787B and a long time supplier of vital lubricants to Mazda, Idemitsu has intimate knowledge of the requirements of rotary engines.
With the precise base oil mix of PolyAlphaOlephins and PolyEsters, Idemitsu Rotary Engine Oils are able to minimize those deposits on your apex seals.
Allows for better sealing of the chamber, facilitating more power generation.
Extends the life of turbochargers by reducing bearing coking.
Specially developed additives facilitate even tooth load on the front stationary gear to allow for higher loads and higher RPM.
Premium anti-wear agents create a strong film between the main bearings and the eccentric shaft, reducing metal-to-metal contact and minimizing bearing wear.
Developed to reduce entrained gas generation. Entrained gases reduce the oils ability to prevent metal-on-metal contact, thereby increasing main bearing wear.
Includes Molybdenum as a friction modifier. This compound reacts with the metal surfaces to create a low-shear boundary. The low shear characteristic reduces friction, increasing efficiency and power output.
A full synthetic oil specially formulated for your rotary engine from Idemitdu
Each Bottle contains 1 US Quart of Oil
HKS Super Oil 13BT 10w45 Full Synthetic Rotary Oil 1 Liter
HKS Super Oil series were developed on the concept of "engine oil is one of the engine part".HKS' original "HIPER ESTER" can follow extreme ...
HKS Super Oil series were developed on the concept of "engine oil is one of the engine part".HKS' original "HIPER ESTER" can follow extreme boundary lubrication to any kind of engines on the metal absorbed molecular level. Each engine oil viscosity was determined specifically for the target engine for optimum engine performance. Super Oil is 100% specially blended synthetic oil.
HKS say 13BT oil is the best to use for the rotary turbo engine.
100% synthetic oil can prevent carbon from adhering to inside the housing that usually occurs in a rotary engine. HIPER ESTER maintains the oil film retainment under high temperature and airtightness inside the housing without risk to the rotary engine apex seals.
Sold as 1 Liter Can
HKS Super Oil 13BT 10w45 Full Synthetic Rotary Oil 4 Liter
HKS Super Oil series were developed on the concept of "engine oil is one of the engine part".HKS' original "HIPER ESTER" can follow extreme ...
HKS Super Oil series were developed on the concept of "engine oil is one of the engine part".HKS' original "HIPER ESTER" can follow extreme boundary lubrication to any kind of engines on the metal absorbed molecular level. Each engine oil viscosity was determined specifically for the target engine for optimum engine performance. Super Oil is 100% specially blended synthetic oil.
HKS say 13BT oil is the best to use for the rotary turbo engine.
100% synthetic oil can prevent carbon from adhering to inside the housing that usually occurs in a rotary engine. HIPER ESTER maintains the oil film retainment under high temperature and airtightness inside the housing without risk to the rotary engine apex seals.
Sold as 4 Liter Can
HKS Super Oil 13BT 10w45 Full Synthetic Rotary Oil 20 Liter
HKS Super Oil series were developed on the concept of "engine oil is one of the engine part".HKS' original "HIPER ESTER" can follow extreme ...
HKS Super Oil series were developed on the concept of "engine oil is one of the engine part".HKS' original "HIPER ESTER" can follow extreme boundary lubrication to any kind of engines on the metal absorbed molecular level. Each engine oil viscosity was determined specifically for the target engine for optimum engine performance. Super Oil is 100% specially blended synthetic oil.
HKS say 13BT oil is the best to use for the rotary turbo engine.
100% synthetic oil can prevent carbon from adhering to inside the housing that usually occurs in a rotary engine. HIPER ESTER maintains the oil film retainment under high temperature and airtightness inside the housing without risk to the rotary engine apex seals.
Sold as 20 Liter Drum
Seafoam Motor Treatment Engine Cleaner 16oz Liquid
Seafoam Motor Treatment is a popular engine cleaner for rotary engines and can help free stuck seals within the engine that may have been ca ...
Seafoam Motor Treatment is a popular engine cleaner for rotary engines and can help free stuck seals within the engine that may have been caused by carbon build up.
This carbon can build up in many areas including
On the rotors causing potential hot spots
Over the apex seals contributing to reduced travel, hampering the seals ability to seal the combustion chambers from one another
In Seal grooves reducing apex seals, side seals and corner seals ability to do their job as designed
In Exhaust ports (especially on RENESIS RX-8 side exhaust ports)
Sticking intake valves
Seafoam Motor treatment can help combat this harmful carbon and keep your engine in top condition.
Seafoam is oxygen (LAMBDA) sensor safe and can be used in a variety of ways, including adding the the fuel tank, or the most popular way on the rotary engine is to introduce a small amount undiluted in to the engine through the intake vacuum nipples found on the intake manifold of the rotary engine. The leaved it to soak and work its magic.
Please note that this procedure can result in engine damage if done incorrectly so Essex Rotary recommend consulting a professional with experience of this procedure prior to trying it for yourself.
Sold in a 16 fl ox bottle this is enough to do several treatments if used in the way described above.
Essex Rotary accept no responsibility for engine damage caused by using this product incorrectly.
Standard Air Filter for RX-7 FC & FD
This is a high quality replacement air filter for your RX-7 fits both RX-7 FC3s and FD3s.
A Genuine Mazda Air Filter will be supplie ...
This is a high quality replacement air filter for your RX-7 fits both RX-7 FC3s and FD3s.
A Genuine Mazda Air Filter will be supplied whenever possible, however if unavailable we may select a high quality alternative.
Evans Powercool 180 Waterless Coolant 5 Liters
Evans Power Cool 180 is the coolant of choice for many professional racing teams and performance car specialists. For use in all performance ...
Evans Power Cool 180 is the coolant of choice for many professional racing teams and performance car specialists. For use in all performance car engines primarily fabricated from aluminium, plus some steel and copper components.
Conversion from a water-based coolant to Evans is a straight forward process that can be undertaken by anyone with some basic experience in engine mechanics.
The primary objective of converting to Evans Waterless Engine Coolant is to eliminate all of the problems associated to water:
Eliminates Overheating
Evans Waterless Coolants have a boiling point above 180°C and will not vaporise, thus eliminating overheating, boil-over and after-boil.
Reduces Pressure
Evans Waterless Coolants generate very low vapour pressures reducing strain on engine hoses and cooling system components.
Prevents Corrosion
Water promotes corrosion via oxidation and electrolysis. Evans Waterless Coolants contain no oxygen and are virtually non-conductive effectively preventing corrosion.
Maximise BHP
Evans Waterless Coolants eliminate pre-ignition and detonation caused by overheating - thus increasing combustion efficiency and delivering more power.
Stops Erosion
Evans Waterless Coolants stop cavitation and eliminate liner and cooling pump erosion.
Non-Toxic
Evans Waterless Coolants are proven to be Non-Toxic. Standard anti-freeze is toxic and known to kill pets.
If the engine to be converted is currently filled with a water-based coolant an important part of a good installation is using Evans Prep Fluid. Prep Fluid is specifically formulated to purge remaining water-based antifreeze from the system after initial drain. Evans Prep Fluid is sold separately and available just below.
2 x 5 Litre cans will be required to fill a full cooling system of most RX-7's or RX-8's
We are offering a Discounts for 2 bottle packs plus combined delivery discount if buying two bottles together to be shipped to a UK Mainland address, Simply select your desired quantity from the drop down menu.
Evans Prep Fluid 5 Litres
Evans Prep Fluid MUST be used before Evans coolant is installed in your cooling system for the first time, when converting from traditional ...
Evans Prep Fluid MUST be used before Evans coolant is installed in your cooling system for the first time, when converting from traditional coolant.
Evans Prep Fluid is specifically formulated to hygroscopically absorb any water-based coolant remaining in the cooling system after initial drain. Because certain parts of the cooling system might not drain out with gravity, and it would take too long to disconnect every pipe etc., installing a scavenging fluid is the most practical method of removing all the water-based coolant.
The Prep Fluid is not formulated to chemically clean the engine of rust and scale, but the process of circulation and draining will help remove any loose sediment.
Evans Prep Fluid must be used before converting from a water based coolant to Evans Waterless Engine Coolant.
2 x 5 Litre cans will be required to fill a full cooling system of most RX-7's or RX-8's
We are offering a Discounts for 2 bottle packs plus combined delivery discount if buying two bottles together to be shipped to a UK Mainland address, Simply select your desired quantity from the drop down menu.
Evans Cooling System Full Conversion Pack (5% Bundle Deal)
This Kit contains everything you will need to carry out the conversion from conventional coolant over to Evans Waterless Coolant on your Maz ...
This Kit contains everything you will need to carry out the conversion from conventional coolant over to Evans Waterless Coolant on your Mazda RX-7 or RX-8.
Plus we are offering 5% Discount when purchasing this pack compared to purchasing everything individually.
This Kit Contains the following;
2 x 5 Litre bottles of Evans Prep Fluid.
2 x 5 Litre bottles of Evans Power Cool 180 Waterless Coolant.
This is the perfect starter pack to carry our a full conversion offered with a great bulk shipping discount.
Before using Evans Waterless coolant for the first time it is advised that Evans Prep fluid is used to flush the cooling system of ay remaining water based coolant, This is essential for a successful conversion to Evans Waterless coolant.
For more information on Prep Fluid and Power Cool 180 can be found in their individual product descriptions above.