REMEMBER TO CHOOSE THE CORRECT SHIPPING OPTION BEFORE ADDING ITEMS TO THE CART!

Racing Beat Lightweight Flywheel

Racing Beat Lightweight Flywheel

From street to road racing, the Racing Beat Aluminum Flywheel is ideally suited for a wide range of performance applications.

T ...

£ 389.99
add to cart
show details

From street to road racing, the Racing Beat Aluminum Flywheel is ideally suited for a wide range of performance applications.

This lightweight aluminum unit reduces the flywheel weight about 29 percent from the original, and reduces the flywheel inertia approximately 55 percent. <p>The weight of the stock flywheel is 16.8 lbs compared to 8 lbs for the Racing Beat Aluminum flywheel. For additional security, the ring gear is bolted firmly in place to the flywheel assembly.

By using this flywheel on a 5 speed RX-8 it will let you replace the small 5 speed clutch with the larger diamiter 6 speed clutch that is more durable. RacingBeatLogo   PLEASE NOTE /  If not already fitted a counterballence is required to fit this flywheel to the engine that can found on this link below
Royal Purple Max Gear 75w140 Diff Oil

Royal Purple Max Gear 75w140 Diff Oil

Essex Rotary are please to offer this high quality gear oil from Royal Purple in the USA. Selected for your Gearbox needs. Max Gear is an ...

£ 28.99
add to cart
show details
Essex Rotary are please to offer this high quality gear oil from Royal Purple in the USA. Selected for your Gearbox needs. Max Gear is an ultra-tough, high performance automotive gear oil designed to provide maximum protection to heavily loaded gears while maximizing power throughout the drive train. Max Gear outperforms ordinary gear oils by combining the highest quality synthetic oils with Royal Purple’s proprietary Synerlec additive technology. Max Gear makes gears run smoother, quieter, cooler and longer without overhauls. Max Gear is formulated with a friction modifier additive – no additional additives are necessary. RoyalPurpleLogomd Performance Advantages
  • Maximizes horsepower
  • Extends gear and bearing life
  • Reduces operating temperature
  • Severe service performance
  • Lower coefficient of friction
  • Superior corrosion protection
  • Separates rapidly from water
  • Environmentally responsible
Each bottle is 1 US Quart (0.946L) You will Require 2-3 Bottles for your gearbox depending on model Dont forget to check out our Other offerings from Royal Purple including TCWIII Premix and Royal Purple ICE Coolant Addative.
FEED Brake Master Cylinder Tank Cap for RX-7

FEED Brake Master Cylinder Tank Cap for RX-7

This FEED brake master cylinder reservoir cap is a nice little dress up item for your RX-7's engine bay. while many places offer oil fill ...

£ 59.99
add to cart
show details

This FEED brake master cylinder reservoir cap is a nice little dress up item for your RX-7's engine bay. while many places offer oil filler caps no one other then FEED seem to do one compatible with the RX-7's brake master reservoir that is of such high quality.

The Feed Logo comes detached so you can screw the cap on then position the logo as you like it. Made from Billet Aluminium its light and stylish.


FEEDBrakeMasterCapRX8270px
Competition Clutch Ultralight 4.3kg Flywheel

Competition Clutch Ultralight 4.3kg Flywheel

Essex Rotary bring you the Ultralight Flywheel from Competition Clutch. These Flywheels are the Lightest you will get before stepping up in ...

£ 254.99
add to cart
show details
Essex Rotary bring you the Ultralight Flywheel from Competition Clutch. These Flywheels are the Lightest you will get before stepping up in price to the Racing Beat Flywheel. The CC Ultralight Flywheel weighs in at just 4.3kg (9,6lbs)
Competition Clutch Flywheels are made from high quality 4140 forged steel with an integral ring gear to prevent the possibility of ring gear separation that can happen on the Original Mazda Flywheel.

This Flywheel will require a counterweight to be purchased to enable installation of an aftermarket flywheel. These can also be purchased on our online store.

Please allow up to 7 days for delivery.

This Part is compatible with both RX-7 and RX-8 however if fitting to a 192 RX-8 you will require a new 6 speed clutch assembly.
Competition Clutch Street Light 6kg Flywheel

Competition Clutch Street Light 6kg Flywheel

More Responsive, Faster Revving, Less Inertia! Essex Rotary bring you the Street Light Flywheel from Competition Clutch. These Flywheels ar ...

£ 219.99
add to cart
show details
More Responsive, Faster Revving, Less Inertia! Essex Rotary bring you the Street Light Flywheel from Competition Clutch. These Flywheels are the considerably lighter than a stock Mazda Flywheel though heavier then both the CC Ultralight or Racing Beat Flywheels we offer. The CC Street Light Flywheel weighs in at 6kg (13.2bs) Competition Clutch Flywheels are made from high quality 4140 forged steel with an integral ring gear to prevent the possibility of ring gear separation that can happen on the Original Mazda Flywheel. This Flywheel will require a counterweight to be purchased to enable installation of an aftermarket flywheel. These can also be purchased on our online store. Please allow up to 7 days for delivery. This Part is compatible with both RX-7 and RX-8 however if fitting to a 192 RX-8 you will require a new 6 speed clutch assembly.
Pilot Bearing and Seal Kit

Pilot Bearing and Seal Kit

Replace During a Clutch Change! This is a 2 piece kit to replace the pilot bearing and grease seal found in the back of th ...

£ 29.00
add to cart
show details
Replace During a Clutch Change! This is a 2 piece kit to replace the pilot bearing and grease seal found in the back of the Eccentric shaft during engine or clutch replacement.

This set will fit most engines from the FB (12a) onwards and may fit older vehicles also.
Set includes one "needle" Pilot Bearing one Pilot Bearing Seal.
Black Halo Racing Flywheel

Black Halo Racing Flywheel

Exclusive to Essex Rotary in the UK.
Offering the lightest streetable flywhee ...

£ 455.00
add to cart
show details
Exclusive to Essex Rotary in the UK.
Offering the lightest streetable flywheel on the market worldwide, BHR lead the way in product innovation.

BlackHaloRacingFlywheel420px When it comes to your powertrain the flywheel can be a limiting factor due to it's mass.  While at slightly less than 17 lbs. the RX-8 has a lighter flywheel than most production vehicles, Black Halo Racing has gone further to develop a much lighter alternative.  Our 9 lb. aluminum flywheel removes rotating mass in critical areas allowing more power to be translated to the wheels (which is where you want it, isn't it!).  Our flywheel also has a replaceable friction face allowing you to reuse/repair the flywheel (if necessary) instead of having to buy a replacement should the need arise.

Necessary counterweight is sold separately.
Optional discount if purchased with a counterweight, take a look at our special offers section for model options, Package price would be £525.00 collected or £545 Delivered

Currently In Stock
Idemitsu Racing MTF/Gear Oil 75w90 (for Gearbox)

Idemitsu Racing MTF/Gear Oil 75w90 (for Gearbox)

Race Proven Gearbox Oil from Idemitsu
This formulation has been spec ...

£ 19.99
add to cart
show details
Race Proven Gearbox Oil from Idemitsu
This formulation has been specifically engineered to provide maximum performance and protection for engines under severe racing conditions. Built on a tradition of excellence by IDEMITSU, this technology is derived from decades of experience formulating premium lubricants for Japanese auto manufacturers.

IdemitsuLogoLongWhite750px
  • Formulated Specifically For High Performance Gearboxes

  • Enhanced Film Strength Provides Excellent Durability and Wear Protection

  • Advanced Extreme Pressure Additive Package Improves Performance Under High Load Conditions

  • Superior Shear Stability Ensures Viscosity Retention Under High Stress Operations

  • Provides Smooth Shifting Across All RPMs

Each bottle contains 1 US quart of oil, please note you will require the following amounts for each kind of gearbox 2 Bottles for RX-8 6 speed gearbox inc the R3 3 Bottles for RX-8 5 Speed Gearbox and RX-7 FD Gearbox
Clutch Release Bearing

Clutch Release Bearing

A high quality clutch release bearing for push type clutches found on the RX-8 and RX-7 FB and FC3s It is highly recommended that this be ...

£ 50.00
add to cart
show details
A high quality clutch release bearing for push type clutches found on the RX-8 and RX-7 FB and FC3s It is highly recommended that this bearing is replaced at any opportunity  due to the considerable labor involved if it fails. Please note that this will not fit the FD3s clutch if it has not been converted from pull type clutch mechanism to push type. This part can also be referred to as a Throw Out Bearing or Thrust Bearing. Image for Illustration Purposes Only, Actual Bearing may differ from that show.
Counterweight for RX-7 13bt Turbo II Engine

Counterweight for RX-7 13bt Turbo II Engine

This is a rear counterweight to fit the 13bt found in the RX-7 FC3s Turbo II These counterweights are required if you are installing an a ...

£ 148.80
add to cart
show details
This is a rear counterweight to fit the 13bt found in the RX-7 FC3s Turbo II These counterweights are required if you are installing an aftermarket lightweight flywheel such as our Racing Beat lightweight flywheel or an uprated clutch/flywheel kit. Make sure your order one of these with your new flywheel or it cannot be fitted. Please note that this item is compatible with the 13bt engine found in RX-7 FC3s Turbo II if your using the 13bt Engine in another vehicle this is still the counterweight you will require.
This Counterweight will not be suitable for your RX-7 FC3s EGI engine due to the difference in weight
Clutch Master Cylinder for RX-7 FC3s

Clutch Master Cylinder for RX-7 FC3s

High Quality Replacement Clutch Master Cylinder for the Mazda RX-7 FC3s This will fit all 2nd Generation RX-7's Many owners are choosing t ...

£ 74.95
add to cart
show details
High Quality Replacement Clutch Master Cylinder for the Mazda RX-7 FC3s This will fit all 2nd Generation RX-7's Many owners are choosing to replace their clutch Master and Slave Cylinder as a precautionary measure, There is nothing worse then a brake down due to a leak on either of these cylinders.
Clutch Slave Cylinder for RX-7 FC3s EGI

Clutch Slave Cylinder for RX-7 FC3s EGI

High Quality Replacement Clutch Slave Cylinder for the Mazda RX-7 FC3s This will fit the 2nd Generation RX-7 EGI Only Many owners are choos ...

£ 79.95
add to cart
show details
High Quality Replacement Clutch Slave Cylinder for the Mazda RX-7 FC3s This will fit the 2nd Generation RX-7 EGI Only Many owners are choosing to replace their clutch Master and Slave Cylinder as a precautionary measure, There is nothing worse then a brake down due to a leak on either of these cylinders.

Common signs of slave cylinder failure include
  • The Pedal failing to return to the top when released
  • Clutch fluid leaking from the Cylinder
  • Inability to select gears
Clutch Slave Cylinder for RX-7 FC3s Turbo II

Clutch Slave Cylinder for RX-7 FC3s Turbo II

High Quality Replacement Clutch Slave Cylinder for the Mazda RX-7 FC3s This will fit the 2nd Generation RX-7 Turbo II Only Many owners are ...

£ 99.99
add to cart
show details
High Quality Replacement Clutch Slave Cylinder for the Mazda RX-7 FC3s This will fit the 2nd Generation RX-7 Turbo II Only Many owners are choosing to replace their clutch Master and Slave Cylinder as a precautionary measure, There is nothing worse then a brake down due to a leak on either of these cylinders.

Common signs of slave cylinder failure include
  • The Pedal failing to return to the top when released
  • Clutch fluid leaking from the Cylinder
  • Inability to select gears
This is the Master Cylinder you will require if your using a Turbo II Gearbox in your RX-7, it is worth noting that this is different to the EGI Slave cylinder.
Competition Clutch Stage 2 Clutch Kit for RX-7 FC3S TurboII

Competition Clutch Stage 2 Clutch Kit for RX-7 FC3S TurboII

Stage 2 - Steel Sprungback Brass Plus.
Street /Track Series 2100 Clutch Kit, Rated for handling up to 450hp
A great priced opt ...

£ 364.99
add to cart
show details
Stage 2 - Steel Sprungback Brass Plus.
Street /Track Series 2100 Clutch Kit, Rated for handling up to 450hp
A great priced option for street use while still being extremely capable on the track.

This assembly provides up to 80% increase in torque capacity and is properly suited for aggressive street use and moderate track use. The Brass Plus material with its alloy backing matched to a performance pressure plate will provide smooth engagement and extended life. 500 mile break-in highly recommended with this set-up. 300-mile break-in REQUIRED with this set-up. (Some kits may not be supplied with all pieces. Please verify with Competition Clutch before ordering).

The 2100 Series kit includes a performance pressure plate, a high torque sprung disc with anti-burst steel backed Brass Plus facings, all applicable bearings, and the appropriate alignment.
Please note that the images prodided are for illustration purposes only and the clutch kit supplied WILL be the pull type correct for the RX-7 FD transmission.

Essex Rotary would recommend changing your pilot bearing and seal out at the same time as doing your clutch, this is an inexpensive part however its often overlooked when doing the job.

This Kit will not fit the Non Turbo (EGI) RX-7 FC. Please contact us for Info on EGI Clutches.
Competition Clutch Stage 3 Clutch Kit for RX-7 FC3S TurboII

Competition Clutch Stage 3 Clutch Kit for RX-7 FC3S TurboII

Sprung Segmented Ceramic, Good for up to 525hp
Stage 3 - Street / Strip Series 2600 Clutch Kit.
Great for heavily modified F ...

£ 375.99
add to cart
show details
Sprung Segmented Ceramic, Good for up to 525hp
Stage 3 - Street / Strip Series 2600 Clutch Kit.
Great for heavily modified Forced Induction RX-8's but keeps a streetable clutch pedal feel This segmented Ceramic material with a performance pressure plate will provide the ultimate in street and strip combinations. This assembly is suited for up to 150% increase in torque capacity. Provides quick but smooth engagement and extended life. 300-mile break-in recommended with this set-up.
The 2600 Series kit includes a performance pressure plate, a high torque sprung disc with segmented Ceramic facings, all applicable bearings, and the appropriate alignment tool.
Please note that the images provided are for illustration purposes only and the clutch kit supplied WILL be the pull type correct for the RX-7 FD transmission.
Essex Rotary would recommend changing your pilot bearing and seal out at the same time as doing your clutch, this is an inexpensive part however its often overlooked when doing the job.
This Kit will not fit the Non Turbo (EGI) RX-7 FC. Please contact us for Info on EGI Clutches.
Competition Clutch Stage 4 Clutch Kit for RX-7 FC3S TurboII

Competition Clutch Stage 4 Clutch Kit for RX-7 FC3S TurboII

6 Pad Sprung Ceramic Kit good for up to 600hp.
Stage 4 - Spring Strip Series 1620 Clutch Kit.
This assembly, available with ...

£ 384.99
add to cart
show details
6 Pad Sprung Ceramic Kit good for up to 600hp.
Stage 4 - Spring Strip Series 1620 Clutch Kit.
This assembly, available with a six puck sprung plate is good for penetrating engagement with higher horsepower applications. This disc complimented by a performance pressure plate provides up to 250% increase in torque capacity. 300-mile break-in recommended with this set-up.
The 1620 Series kit includes a performance pressure plate, a six-puck high torque sprung disc with Ceramic buttons, all applicable bearings, and the appropriate alignment tool.
Please note that the images provided are for illustration purposes only and the clutch kit supplied WILL be the pull type correct for the RX-7 FD transmission.
Essex Rotary would recommend changing your pilot bearing and seal out at the same time as doing your clutch, this is an inexpensive part however its often overlooked when doing the job.
This Kit will not fit the Non Turbo (EGI) RX-7 FC. Please contact us for Info on EGI Clutches.
Competition Clutch 184mm Rigid Twin Disc Clutch & Flywheel Kit RX-7 FC3s TurboII

Competition Clutch 184mm Rigid Twin Disc Clutch & Flywheel Kit RX-7 FC3s TurboII

Weighing in at 13.05kg total for the entire assembly.
The CCI twin disc provides the most economical racing clutch for the active sp ...

£ 999.99
add to cart
show details
Weighing in at 13.05kg total for the entire assembly.
The CCI twin disc provides the most economical racing clutch for the active sport compact enthusiast. This ceramic twin disc comes with a 4140 forged flywheel and a 6061 T6 aluminium cover complimented with a 6150 steel diaphragm. These units are rated to hold 500 to 1200hp (depending on application).
Competition Clutch Part Number 4-10037-C
This Kit includes Twin Plate Clutch and Flywheel.
CompetitionClutch184mmMPCFC3sRX-7500px
Essex Rotary would recommend changing your pilot bearing and seal out at the same time as doing your clutch, this is an inexpensive part however its often overlooked when doing the job.
This Kit will not fit the Non Turbo (EGI) RX-7 FC. Please contact us for Info on EGI Clutches.

Shopping Cart

 

Shop categories

ajax
ajax