The filter with integral Neodymium Magnet technology inside

A new concept oil filter which improves oil pressure drop and flow properties by approximately 30% compared to current sports oil filters. Large diameter of “Super Intake Hole” and newly developed low resistance hybrid filter allow low pressure loss. Engine response is alos improved by reducing the stress on the engine.

Most sports oil filters are prerequisite for using the high viscosity oil and therefore filter paper strength is prioritized whilst sacrificing absolute pressure loss properties. HKS Hybrid Sports Oil Filter has readdressed filter strength and overall structure to provide the oil flow that the engine requires and pursue HKS’ ideals in what is required from a sports oil filter.

Comma 15w40 Mineral Oil

This is the standard stuff that we normally use on our services, offering a higher viscosity than the recommended oil, 15w40 will help protect the inside of your engine better especially the stationary gear bearings (a key weak point on the RX-8 when using 5w30)

This oil is supplied in a 5 liter can and should be enough for a oil change plug 1-1.5 liters spare for top ups.

We recommend 3000-6000mile (or 6 months) oil changes to keep your oil as clean as possible.

Larger quantities are available please contact us for pricing

This is a standard replacement air filter for your RX-8′s air filter box

OE spec this item should be replaced every 3 years according to the Mazda Service plan.
Why not look at our K&N Filter as a possible alternative.

You may also need to change this if you have overfilled your oil and it has contaminated your original air filter

This drop in in air filter from K&N is designed to last the lifetime of your car.

It will never need replacing, unlike the standard air intake filters, and will only need washing and re-oiling (every 50’000miles maximum). For what is roughly double the price of a normal Air filter you can get better air flow and a reusable filter.

The other upside to this is that if your unlucky enough to overfill your oil (on early cars) it would have been blown up in to your intake and contaminate your air filter with oil, Possibly leading to some of the following symptoms:

• Rough Idle
• Smoke from exhaust
• Stalling
• MAF (Mass Air Flow) sensor contamination

An excellent addition to any service plan. Ask about the K&N panel filter when you book your next service

High quality replacement pollen filter for your RX-8<br />
We have tried many different pollen filters over the years and have settles on a filter that exhibits very good fitment in to the Mazda blower unit.

Set of 4 Magnecor R-100 (10mm) Racing HT leads for you RX8

Designed for racing engines using racing ignitions,supercharging and exotic fuels.Extra large 10mm jacket made from aerospace extreme heat-resistant silicone rubber to provide additional heat protection and insulation.Exclusive Magnecor 2.5mm Metallic Inductance Suppressed Conductor will suppress EMI indefinitely.Can be used on street vehicles if space allows.

Standard Mazda HT leads do not offer the insulation and moisture protection that the superior Magnecore HT leads do. As a result plug tips can become corroded and in extreme cases we have even seen the plugs core broken clean out

With Ignition being important do not forget to add Magnecore Leads to your purchase of ignition parts

With a 10 year guarantee you will not need to change these again.

Set of 4 Magnecore KV85 (8.5mm) Performance HT leads for you RX8
Standard Mazda HT leads do not offer the insulation and moisture protection that the superior Magnecore HT leads do. As a result plug tips can become corroded and in extreme cases we have even seen the plugs core broken clean out

With Ignition being important do not forget to add Magnecore Leads to your purchase of ignition parts

With a 10 year guarantee you will not need to change these again.

Magnecor Leads – Original equipment replacement. Designed to improve original ignition system performance on street vehicles using electronic engine management systems.

We have seen many RX-8′s exhibiting problems due to the standard Mazda HT leads failing mainly due to the boot not sealing around the spark plug correctly leading to corrosion of the plugs connector and in some cases the tip actually braking clean off of the spark plug.

We have also Witnessed first hand the poor insulation properties of many replacement “OEM spec” Ht leads available on the market in some cases we have witnessed sparks grounding to the chassis or engine before reaching the spark plug.

Magnecor HT leads will eliminate the issue above!

Each lead is also individually marked at the coil pack connector (L1, T1, L2, T2) to make installation simple easy to follow.

Magnecor leads are the only HT leads that Essex Rotary recommend and fit to our own vehicles and customers vehicles alike.

Magnecor Accept no substitute!

All Magnecor leads are covered by a 10 year guarantee which ensures long lasting reliability and
service life.

Normal Price £64.99
Special Introductory Price normally £69.99

Made to order right here at Essex Rotary using all MSD Components.

The MSD 8.5 mm Super Conductor wire is the performance wire engineered from the inside out, the 8.5mm offers everything you have ever wanted in a wire; incredibly low resistance without electronic interference! In a single 12 In. length of Super Conductor wire there is only 40 to 50 ohms of resistance! That is the lowest resistance of any helically wound wire. To accomplish this, MSD use a copper alloy conductor due to it’s great voltage carrying capabilities. The low resistance results in less loss of spark energy so more reaches the spark plug. The conductor is wound extremely tight around a special center core. So tight, that there is over 40 Ft. of conductor wrapped into a single foot of plug wire. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective electro magnetic interference (EMI) choke.

• Copper alloy conductor has a resistance value of less than 50 ohms per foot for superior spark
• Ferro-magnetic impregnated core creates an effective EMI choke
• Forty feet of conductor is wound into a single foot of wire for high EMI suppression
• Conductor core features Dupont Kevlar material for increased tensile strength
• Durable outer sleeve is a proprietary compound for resistance to high heat or abrasion
• Stainless steel terminals feature dual crimp tabs to grip wire conductor and outer jacket separately

These MSD HT Leads are made to order right here at Essex Rotary HQ, from genuine MSD components. Available in Red or Black cable options (select your preferred color fron the drop down menu before hitting the “add to cart” button.

Custom lengths and configurations available upon request.

This is a set of 4 genuine NGK platinum tip spark plugs for your RX-8

These are the cooler plugs with the following part numbers:

• 2 x RE8C-L
• 2 x RE9B-T

These plugs where the original plugs specified for the Renesis rotary engine by Mazda however where later chamged to the hotter iridium ones we have in our shop.

However please do not be put off as these are still our most popular plug for the RX-8 and we fit lots of these. with the saving over the Iridium plugs these represent great value for money.

May owners with ported or mapped engines will use these plugs also.

Sold as a set of 4 plugs.

A set of 4 Genuine NGK Iridium Spark Plugs

These are the later hotter spec plugs recommended for the R3, Many owners have used these to help prevent flooding

This set consists of ;

• 2 x RE7C-L
• 2 x RE9B-T

We would normally recommend these be changed more frequently than Mazda Recommend ideally between 12 and 24 months or 12’500-25’000mile intervals.

Available at a fraction of the cost and 100% genuine parts.

Set of 4 genuine Mazda Ignition coils for your Mazda RX8

These are the latest generation “C” packs that Mazda has released, Anyone that knows about the RX8 can tell you that the ignition coils have proven to be a weak point in a great car.

The early coils had a poor design that has in later years now started to cause dead catalytic converters, and in worst cases even possibly contributed to killing an engine.

Many enthusiasts will change these out every 30’000 mile intervals (maximum) as a preventative measure.
We can offer these Genuine Mazda parts at a fraction of the price you would pay at a dealers.

As a warning… Do no compromise on coils packs, as a specialist we have seen many cars that have had pattern coils fitted to solve a problems that is still there. Only accept Genuine Coils Packs.

Price is for a set of 4 coil packs

Genuine Mazda Ignition coil (Sold Seperately) for your Mazda RX8

These are the latest generation “C” packs that Mazda has released, Anyone that knows about the RX8 can tell you that the ignition coils have proven to be a weak point in a great car.

The early coils had a poor design that has in later years now started to cause dead catalytic converters, and in worst cases even possibly contributed to killing an engine.

Many enthusiasts will change these out every 30’000 mile intervals (maximum) as a preventative measure.
We can offer these Genuine Mazda parts at a fraction of the price you would pay at a dealers.

As a warning… Do no compromise on coils packs, as a specialist we have seen many cars that have had pattern coils fitted to solve a problems that is still there. Only accept Genuine Coils Packs.

While we offer these coil packs individually we strongly recommend that ignition coils are replaced in full sets for best results.

Price is for ONE SINGLE coil pack

Servicing Simplified
Our service packs are designed to firstly simplify the servicing requirements of your RX-8 no matter what model RX-8 you drive.

Here at Essex Rotary we  have looked at the Mazda’s standard service schedule and seen where is needs improvement.
With careful consideration to the shortfalls of the Mazda schedule and taking in to account some of the advancements in technology such as 5 year long life coolant. Essex Rotary has engineered a 4 year service plan to cover all aspects of your RX-8′s servicing needs that leaves nothing to chance.

Essex Rotary has carefully selected parts and fluids to meed or exceed the requirements set out by Mazdas service requirements.For this reason please remember that some of these items will differ from those you would be supplied at your dealer.

The Year 4 service pack includes following items;

• Engine Oil, Comma 15w40 Mineral (5 Liters)
• Engine Oil Filter
• Brake & Clutch Fluid Comma DOT5.1 (2×1 Liter)
• Cabin Pollen Filter Pack
• Engine Coolant 5 Year Super Long Life (10 Liters)
• Air Filter (disposable)
• NGK Iridium Spark Plugs 2 x RE7C-L + 2 x RE9B-T
• Royal Purple Max Gear Differential Oil (2 US Quarts)
• Royal Purple Max Gear Gearbox Oil* (select amount on drop down menu)
• Cataclean
• Gates Belts A/C and Mail Drive Belts
• Windscreen Wiper Set from Super Silicone PIAA
• Set of replacement crush washers for Sump, Gearbox and Differential

*depending on your transmission a different amount of fluid is required for the gearbox. So that we can provide you with the correct quantity of gearbox oil for your vehicle please select “5sp Pack” (for 5 speed transmission) or “6sp Pack” (for 6 speed transmission) from the drop down menu.
Assuming your gearbox has bot been swapped for the other here is a brake down of whats what.
5 speed gearbox is found in the 192ps RX-8
6 speed gearbox is found in the 231ps RX-8

Please remember that these packs do not come with an R3 oil filter, if you have an R3 this will need to be purchased separately.

Normal Price for this pack if bought separately would be as follows;

• £469.30 for a 6 speed transmission pack**
• £498.29 for a 5 speed transmission pack**

However if bought as a pack we can offer a 5% Discount bringing the price down to

• £445.84 for a 6 speed transmission pack**
• £473.38 for a 5 speed transmission pack**

**All Prices are plus p&p if your not collecting.

Pack prices are for parts only and do not include any labour charges for carrying out the servicing
This price is only available online.

Servicing Simplified
Our service packs are designed to firstly simplify the servicing requirements of your RX-8 no matter what model RX-8 you drive.

Here at Essex Rotary we  have looked at the Mazda’s standard service schedule and seen where is needs improvement.
With careful consideration to the shortfalls of the Mazda schedule and taking in to account some of the advancements in technology such as 5 year long life coolant. Essex Rotary has engineered a 4 year service plan to cover all aspects of your RX-8′s servicing needs that leaves nothing to chance.

Essex Rotary has carefully selected parts and fluids to meed or exceed the requirements set out by Mazdas service requirements.For this reason please remember that some of these items will differ from those you would be supplied at your dealer.

The Year 4 service pack includes following items;

• Engine Oil, Comma 15w40 Mineral (5 Liters)
• Engine Oil Filter
• Brake & Clutch Fluid Comma DOT5.1 (1 Liter)
• Cabin Pollen Filter Pack
• Engine Coolant 5 Year Super Long Life (10 Liters)
• Air Filter (disposable)
• NGK Iridium Spark Plugs 2 x RE7C-L + 2 x RE9B-T
• Royal Purple Max Gear Gearbox Oil* (select amount on drop down menu)
• Cataclean
• Windscreen Wiper Set from Super Silicone PIAA

*depending on your transmission a different amount of fluid is required for the gearbox. So that we can provide you with the correct quantity of gearbox oil for your vehicle please select “5sp Pack” (for 5 speed transmission) or “6sp Pack” (for 6 speed transmission) from the drop down menu.
Assuming your gearbox has bot been swapped for the other here is a brake down of whats what.
5 speed gearbox is found in the 192ps RX-8
6 speed gearbox is found in the 231ps RX-8

Please remember that these packs do not come with an R3 oil filter, if you have an R3 this will need to be purchased separately.

Normal Price for this pack if bought separately would be as follows;

• £373.35 for a 6 speed transmission pack**
• £402.32 for a 5 speed transmission pack**

However if bought as a pack we can offer a 5% Discount bringing the price down to

• £354.68 for a 6 speed transmission pack**
• £382.22 for a 5 speed transmission pack**

**All Prices are plus p&p if your not collecting.

Pack prices are for parts only and do not include any labour charges for carrying out the servicing
This price is only available online.

Servicing Simplified
Our service packs are designed to firstly simplify the servicing requirements of your RX-8 no matter what model RX-8 you drive.

Here at Essex Rotary we  have looked at the Mazda’s standard service schedule and seen where is needs improvement.
With careful consideration to the shortfalls of the Mazda schedule and taking in to account some of the advancements in technology such as 5 year long life coolant. Essex Rotary has engineered a 4 year service plan to cover all aspects of your RX-8′s servicing needs that leaves nothing to chance.

Essex Rotary has carefully selected parts and fluids to meed or exceed the requirements set out by Mazdas service requirements.For this reason please remember that some of these items will differ from those you would be supplied at your dealer.

The Year 3 service pack includes following items;

• Engine Oil, Comma 15w40 Mineral (5 Liters)
• Engine Oil Filter
• Air Filter (disposable)
• Royal Purple Max Gear Diff Oil (2 US Quarts)
• Cataclean

Please remember that these packs do not come with an R3 oil filter, if you have an R3 this will need to be purchased seperately.

Normal Price for this pack if bought separately would be £125.98 however if bought as a pack we can offer a 5% Discount bringing the price to £119.68*
All Prices are plug p&p if your not collecting.

Pack prices are for parts only and do not include any labour charges for carrying out the servicing
*This price is only available online.

Servicing Simplified
Our service packs are designed to firstly simplify the servicing requirements of your RX-8 no matter what model RX-8 you drive.

Here at Essex Rotary we  have looked at the Mazda’s standard service schedule and seen where is needs improvement.
With careful consideration to the shortfalls of the Mazda schedule and taking in to account some of the advancements in technology such as 5 year long life coolant. Essex Rotary has engineered a 4 year service plan to cover all aspects of your RX-8′s servicing needs that leaves nothing to chance.

Essex Rotary has carefully selected parts and fluids to meed or exceed the requirements set out by Mazdas service requirements.For this reason please remember that some of these items will differ from those you would be supplied at your dealer.

The Year 2 service pack includes following items;

• Engine Oil, Comma 15w40 Mineral (5 Liters)
• Engine Oil Filter
• Brake & Clutch Fluid Comma DOT5.1 (1 Liter)
• Cabin Pollen Filter Pack
• Air Filter (disposable)
• NGK Iridium Spark Plugs 2 x RE7C-L + 2 x RE9B-T
• Cataclean
• Windscreen Wiper Set from Super Silicone PIAA

Please remember that these packs do not come with an R3 oil filter, if you have an R3 this will need to be purchased separately.

Normal Price for this pack if bought separately would be £274.90 however if bought as a pack we can offer a 5% Discount bringing the price to £261.16*
All Prices are plug p&p if your not collecting.

Pack prices are for parts only and do not include any labour charges for carrying out the servicing
*This price is only available online.

Servicing Simplified
Our service packs are designed to firstly simplify the servicing requirements of your RX-8 no matter what model RX-8 you drive.

Here at Essex Rotary we  have looked at the Mazda’s standard service schedule and seen where is needs improvement.
With careful consideration to the shortfalls of the Mazda schedule and taking in to account some of the advancements in technology such as 5 year long life coolant. Essex Rotary has engineered a 4 year service plan to cover all aspects of your RX-8′s servicing needs that leaves nothing to chance.

Essex Rotary has carefully selected parts and fluids to meed or exceed the requirements set out by Mazdas service requirements.For this reason please remember that some of these items will differ from those you would be supplied at your dealer.

The Year 1 service pack includes following items;

• Engine Oil, Comma 15w40 Mineral (5 Liters)
• Engine Oil Filter
• Air Filter (disposable)
• Royal Purple Max Gear Diff Oil (2 US quarts)
• Cataclean
• Gates Belt Set (A/C and Main Drive Belt)

Please remember that these packs do not come with an R3 oil filter, if you have an R3 this will need to be purchased seperately.

Normal Price for this pack if bought separately would be £150.96 however if bought as a pack we can offer a 5% Discount bringing the price to £143.41*
All Prices are plug p&p if your not collecting.

Pack prices are for parts only and do not include any labour charges for carrying out the servicing
*This price is only available online.

Servicing Simplified
Designed as an intermediate pack to be used in between our yearly packs to keep your oil fresh as it should be, for more information on use of our “Interim” pack check out our servicing tips in the technical section.
Our service packs are designed to firstly simplify the servicing requirements of your RX-8 no matter what model RX-8 you drive.

Here at Essex Rotary we  have looked at the Mazda’s standard service schedule and seen where is needs improvement.
With careful consideration to the shortfalls of the Mazda schedule and taking in to account some of the advancements in technology such as 5 year long life coolant. Essex Rotary has engineered a 4 year service plan to cover all aspects of your RX-8′s servicing needs that leaves nothing to chance.

Essex Rotary has carefully selected parts and fluids to meed or exceed the requirements set out by Mazdas service requirements.For this reason please remember that some of these items will differ from those you would be supplied at your dealer.

The “Interim” service pack includes following items;

• Engine Oil, Comma 15w40 Mineral (5 Liters)
• Engine Oil Filter
• Cataclean

Please remember that these packs do not come with an R3 oil filter, if you have an R3 this will need to be purchased seperately.

Normal Price for this pack if bought separately would be £43.00 however if bought as a pack we can offer a 5% Discount bringing the price to £40.85*
All prices are plus p&p if your not collecting.

Pack prices are for parts only and do not include any labour charges for carrying out the servicing
*This price is only available online.

The Racing Beat REV8 “Street Legal”, Cat-Back RX-8 Exhaust System (Twin Outlet Tips) is the perfect replacement for your stock exhaust – a durable assembly offering a real horsepower gain over your stock unit. Our RX-8 exhaust system consists of a 304 stainless steel Racing Beat connecting-pipe, muffler canisters, tubing, flanges, and outlet tips. The replacement connecting-pipe is manufactured using 3-inch (OD) tubing and features cast stainless steel flanges for positive exhaust gas sealing.

Twin Tips:
The REV8 Exhaust system will certainly stand out from the crowd with its distinctive twin tip outlet design!

A first of its kind offering for the RX-8, these highly polished stainless steel tips offer a welcome change from the standard single tip design and provide a well-balanced look to the rear of the RX-8.

Mirroring the design of the new-for-2009 tail light assembly, the twin tips provide a symmetrical balance from rear facing angles, and maximizes the exhaust openings in the bumper.

(2009+ RX-8 exhaust systems differ with regards to the positioning of the outlet tips and are NOT compatible with earlier 2004-08 RX-8 models, without modification to the Series 1 exhaust shrouds)

Fits 192ps, 231ps, R3 and JDM Imports

The Racing Beat RX-8 manifold is constructed using 100% stainless steel for superior quality, performance and appearance. Exclusive cast stainless-steel mounting flange has been designed to allow the smooth transition of the exhaust gas flow from the engine to the primary tubing. Incorporated into the flange design are critical emission control air passages that were included on the OEM flange design.

These small passages allow air to be pumped into the exhaust ports to aid in more efficient catalytic converter function.

The Racing Beat manifold does not remove any catalytic converters, and is equipped with an oxygen sensor fitting and retains all emissions control functionality.

The Racing Beat Manifold utilizes 1.75” OD, 14 gauge (.083″), mandrel-bent, 304 stainless steel tubing and features an exclusive Racing Beat engine-to-header flange. All required mounting hardware, an outlet gasket, and instructions are included.

A engine-to-manifold gasket is NOT supplied with the kit, but the stock unit can be re-used unless it shows signs or damage, leakage, or extended wear.

Please allow 7-21 days for delivery of this item depending on stock availability
Select “no delivery” if you a purchasing this manifold and would like it fitted at our workshop

Essex Rotary can now offer this high quality catalytic converter as an affordable alternative to replacement of your failed OEM Mazda cat. This catalytic converter complies with the latest Catalyst regulations that came into force on the 13th August 2009.

This Catalytic Converter meets R103 type approval conforming to the new EU Emissions regulations now necessary for RX-8′s to pass the U/K MOT test.

Constructed from superior matrix materials to those offered at a much cheaper price our Cat will give you many years of trouble free operation and will not illuminate the CEL, We have now installed these on many customers cars and have a long track record of trouble free use.

This product is priced at a fraction of the price of a genuine Mazda unit (some dealers are asking as much at £1700 for a Mazda OEM unit) Our Catalytic Converter comes with a 2 year Warranty

Please note if you have not addressed the cause of your Cat failure before installing your new Cat this will cause your new cat to fail prematurely, and in some cases the manufacturer may void the warranty.

Please allow up to 7 days for delivery of this part.

GENUINE BHR PARTS ACCEPT NO SUBSTITUTES!
The kit that spawned a thousand “D585 Coil Kit” COPIES….!

This Package Includes a set of Genuine NGK Iridium spark Plugs (as recommended by BHR) at a large discount
SAVE £25.00 Compared to buying BHR Coils and Plugs Separately

3 Colors Available:

• Red with Red HT Leads
• Blue with Blue HT Leads
• Silver with Black Ht Leads

It is widely known that the ignition coils on the Mazda RX-8 are weak and suffer from reliability issues, even on unmodified engines, as early as 30,000 miles and weak ignition coils eventually result in failure of the exhaust catalyst and/or long-term engine damage. With forced induction, nitrous oxide use, or any kind of track racing you need to have an ignition system that is more reliable and with higher voltage/current output than the OEM system.

The Black Halo Racing Ignition system is designed for purposes of improving the reliability and drivability of the RX8 as well as a modest but noticeable increase in power. This ignition upgrade is NOT designed to resolve problems with your engine/car as a result of mechanical failure, so please be sure your engine is mechanically in proper operating condition before purchasing..

This ignition system is likely the most popular product ever offered for the Mazda RX-8 and it’s popularity continues to rise…… probably because this is the ONLY ignition system for the Mazda RX-8 which retains over 80% of it’s value in the resale market! Do not be misled by imitation/”copycat” systems other retailers may try to sell you as many of them do not include everything needed for a proper installation.

Typical benefits reported by those whom have purchased this kit are quicker start-ups, better throttle response, more midrange torque, smoother engine sound/operation above 7,000 RPMs, and no more misfires. All this applies to power-adder (nitrous or F/I) applications, as well, and all models of the Mazda RX-8.The Black Halo Racing Ignition System addresses these concerns in a very simple manner. The coil conversion wiring harness allows a true “plug-and-play” installation that doesn’t require you to cut, splice, or otherwise alter any wiring in your RX8. The ignition coils used emit more current and voltage than the RX-8/OEM ignition coils and provide much longer life over the stock and most aftermarket systems. They are used in many racing applications, rival any coil in the aftermarket, and this system renders any additional/external ignition hardware unnecessary. The kit mounts in the exact same location as the OEM coils and fits all models/years of the RX-8. Do not wait until problems arise before making improvements to your ignition system.

The pre-assembled kit contains a baseplate, coil brackets, ignition coils, a plug-and-play conversion harness, and custom-built MSD or Moroso spark plug wires. It also includes a 3-year warranty on all parts, materials, and workmanship.
3-year warranty on all parts, materials, and workmanship.

GENUINE BHR PARTS ACCEPT NO SUBSTITUTES!
The kit that spawned a thousand “D585 Coil Kit” COPIES….!

3 Colors Available:

• Red with Red HT Leads
• Blue with Blue HT Leads
• Silver with Black HT Leads

It is widely known that the ignition coils on the Mazda RX-8 are weak and suffer from reliability issues, even on unmodified engines, as early as 30,000 miles and weak ignition coils eventually result in failure of the exhaust catalyst and/or long-term engine damage. With forced induction, nitrous oxide use, or any kind of track racing you need to have an ignition system that is more reliable and with higher voltage/current output than the OEM system.

The Black Halo Racing Ignition system is designed for purposes of improving the reliability and drivability of the RX8 as well as a modest but noticeable increase in power. This ignition upgrade is NOT designed to resolve problems with your engine/car as a result of mechanical failure, so please be sure your engine is mechanically in proper operating condition before purchasing..

This ignition system is likely the most popular product ever offered for the Mazda RX-8 and it’s popularity continues to rise…… probably because this is the ONLY ignition system for the Mazda RX-8 which retains over 80% of it’s value in the resale market! Do not be misled by imitation/”copycat” systems other retailers may try to sell you as many of them do not include everything needed for a proper installation.

Typical benefits reported by those whom have purchased this kit are quicker start-ups, better throttle response, more midrange torque, smoother engine sound/operation above 7,000 RPMs, and no more misfires. All this applies to power-adder (nitrous or F/I) applications, as well, and all models of the Mazda RX-8.The Black Halo Racing Ignition System addresses these concerns in a very simple manner. The coil conversion wiring harness allows a true “plug-and-play” installation that doesn’t require you to cut, splice, or otherwise alter any wiring in your RX8. The ignition coils used emit more current and voltage than the RX-8/OEM ignition coils and provide much longer life over the stock and most aftermarket systems. They are used in many racing applications, rival any coil in the aftermarket, and this system renders any additional/external ignition hardware unnecessary. The kit mounts in the exact same location as the OEM coils and fits all models/years of the RX-8. Do not wait until problems arise before making improvements to your ignition system.

The pre-assembled kit contains a baseplate, coil brackets, ignition coils, a plug-and-play conversion harness, and custom-built MSD or Moroso spark plug wires. It also includes a 3-year warranty on all parts, materials, and workmanship.
3-year warranty on all parts, materials, and workmanship.

The RE-Amemiya D1-Spec Short Shifter will fit both the Mazda RX-7-FD3S and Mazda RX-8 equipped with 5 speed Transmission. The shifter is a plug and play application that effectively reduces the stroke by 5mm between gears while also ‘solidly’ engaging the gears, this may not sound like a lot but it makes a big difference.

Shifting will be smoother with the upgraded brass collar compared to the OEM plastic collar and many owners report that they no longer miss gear changes during spirited driving.

This is the same part as used on the RE-Amemiya RX-7 D1GP cars.

Do note these are to fit the 5MT only and will not fit 6 speed MT equipped RX-8.

In Stock and ready for UK dispatch.

Upgrade your RX-8 Rebuild Kit with Goopy Performance Apex Seals instead of the Genuine Mazda seals.

This item when added to your shopping cart along with your chosen engine rebuild kit will cover the price difference between Mazda Apex seals out kits usually ship with and the additional cost of the Goopy Performance seals.

Please note that this item can only be bought in conjunction with one of our RX-8 rebuild kits and is does not cover the purchase cost of goopy apex seals along.

A set of 6 Genuine Mazda Apex Seals for the RENESIS engine found in the RX-8
Please allow up to 3 weeks for delivery, if not in stock, If you require these quickly please contact us prior to ordering.

A slightly thinner core with a saving to boot, plus a New Improved Price
With cooling being so important to rotaries why not look at upgrading your cooling system. a Koyorad can aid in dropping your coolant temps significantly. Their high quality aluminium construction and OEM fitment means your not paying to have it modified (like many cheaper “racing” radiators)

The KOYO R-Series Core radiator provides improved cooling coverage for both street and track applications combined with show quality looks and finish

Construction is held to tight quality control standards that are illustrated in the outstanding Heliarc soldering, pristine tube and fin alignment, and mirror-like surface finish. The tubes, fins, headers, and brackets are brazed in a state-of-the-art Nocolok furnace, which bonds these components into a virtually indestructible radiator unit.

All fan mounts are situated to OE specifications, and using the OEM mounting locations facilitates fitment into the RX-8.
Why not include a set of SFS Performence Radiator hoses with your new cooling upgrade

Suitable for 192 and 231 models with Manual transmission only

Please allow 7-14 days for delivery depending on stock levels.

These engine rebuild kits have been assembles for the convenience of the regular home rebuilder.

As with our own customer rebuilds here at Essex Rotary, we never scrimp on quality but choose to only supply 100% genuine Mazda parts or carefully selected upgrade options in our kits so you can have piece of mind that what your putting back in your engine is the best available.

Non Mazda upgrade parts will always be clearly marked and offered as an alternative on grounds of quality and reliability NOT because they may just be cheaper then genuine parts (if if they are available).

As with any home rebuild we would advise that you first assess what your engine requires as with each tier of kit we offer your will have a much more inclusive set of parts.

The Tier 4 kit is the most complete rebuild kit we currently offer, including many smaller items that are not usually worn but some people choose to change as a precautionary measure.

Components marked in green denote the extra parts included in the Tier 4 kit when compared to the Tier 3 kit.
Tier 4 Kit includes;

• 6 x Genuine Mazda Apex Seals
• 6 x Long Apex Seal Springs
• 6 x Short Apex Seal Springs
• 12 x Side Seals
• 12 x Side Seal Springs
• 12 x Corner Seals
• 12 x Corner Seal Plugs
• 12 x Corner Seal Springs
• 4 x Inner Oil Control Ring Seals
• 4 x Outer Oil Control Ring Seals
• 4 x Inner Oil Control Ring Cases (metal part)
• 4 x Outer Oil Control Ring Cases (metal part)
• 4 x Inner Oil Control Ring Springs (2 x front facing and 2 x rear faring)
• 4 x Outer Oil Control Ring Springs (2 x front facing and 2 x rear facing)
• 4 x Oil Scraper (blow by) Rings
• 4 x Oil Scraper Ring Springs
• 1 x Front Main Oil Seal
• 1 x Rear Main Oil Seal*
• 2 x Torrington Bearings (also known as thrust bearings)
• 1 x Thrust Plate
• 1 x Thrust Plate Washer
• 1 x Oil Pump Chain
• 2 x Stationary Gear Bearings
• 2 x Rotor Bearings
• 1 x Engine Water Seal Kit (please see below for details of what is included in our water seal kit)
• 1 x Engine Gasket Kit (please see below for details of what is included in the engine gasket kit)
• 1 x Silicon Gasket Sealant
• 1 x Hylomar Gasket Sealant

Genuine Mazda Water Seal Kit includes the following components;

• 2 x Inner Water Jacket Seals
• 2 x Outer Water Jacket Seals
• 4 x Dowel “O” Ring
• 1 x Front E-Shaft Bolt “O” Ring
• 1 x Rear Stationary Gear “O” Ring
• 18 x Through Bolt Seals (Dowty Washers)

The Genuine Mazda engine gasket kit includes;

• 1 x Water Pump Gasket
• 1 x Thermostat Gasket
• 1 x OMP Seal
• 1 x Front Cover Gasket
• 1 x Lower Intake Manifold Gasket**
• 1 x Upper to Lower Intake Manifold Gasket Set**
• 1 x Oil Filler Gasket
• 1 x Injector Seat Seal Set**
• 1 x Oil Injector Crush Washer Set
• 1 x OMP Crush Washer Set
• 1 x Oil Hose Banjo Crush Washer Set
• 1 x Exhaust Manifold Gasket
• 1 x Throttle Body Gasket
• 1 x Oil Filter Pedestal Gasket

**Due to the Differences between the 192ps, 231ps and R3 engines please select the correct kit from the drop down menu above this menu also includes delivery options for your particular package. (found next to the price)

* We supply the better FD3s rear main oil seal in our kits.

While kits are usually delivered quickly in at times when certain items are out of stock please allow up to 28 days for delivery of your selected rebuild kit. If you require your kit urgently please contact us in advance before ordering.

These engine rebuild kits have been assembles for the convenience of the regular home rebuilder.

As with our own customer rebuilds here at Essex Rotary, we never scrimp on quality but choose to only supply 100% genuine Mazda parts or carefully selected upgrade options in our kits so you can have piece of mind that what your putting back in your engine is the best available.

Non Mazda upgrade parts will always be clearly marked and offered as an alternative on grounds of quality and reliability NOT because they may just be cheaper then genuine parts (if if they are available).

As with any home rebuild we would advise that you first assess what your engine requires as with each tier of kit we offer your will have a much more inclusive set of parts.

The Tier 3 kit includes items that are not always commonly changed however this kit gives a more comprehensive rebuild that includes parts we are now commonly finding are beyond tolerance in customers engines.

Components marked in green denote the extra parts included in the Tier 3 kit when compared to the tier 2 kit.
Tier 3 Kit includes;

• 6 x Genuine Mazda Apex Seals
• 6 x Long Apex Seal Springs
• 6 x Short Apex Seal Springs
• 12 x Side Seals
• 12 x Side Seal Springs
• 12 x Corner Seals
• 12 x Corner Seal Plugs
• 12 x Corner Seal Springs
• 4 x Inner Oil Control Ring Seals
• 4 x Outer Oil Control Ring Seals
• 4 x Inner Oil Control Ring Cases (metal part)
• 4 x Outer Oil Control Ring Cases (metal part)
• 1 x Front Main Oil Seal
• 1 x Rear Main Oil Seal*
• 2 x Stationary Gear Bearings
• 2 x Rotor Bearings
• 1 x Engine Water Seal Kit (please see below for details of what is included in our water seal kit)
• 1 x Engine Gasket Kit (please see below for details of what is included in the engine gasket kit)
• 1 x Silicon Gasket Sealant
• 1 x Hylomar Gasket Sealant

Genuine Mazda Water Seal Kit includes the following components;

• 2 x Inner Water Jacket Seals
• 2 x Outer Water Jacket Seals
• 4 x Dowel “O” Ring
• 1 x Front E-Shaft Bolt “O” Ring
• 1 x Rear Stationary Gear “O” Ring
• 18 x Through Bolt Seals (Dowty Washers)

The Genuine Mazda engine gasket kit includes;

• 1 x Water Pump Gasket
• 1 x Thermostat Gasket
• 1 x OMP Seal
• 1 x Front Cover Gasket
• 1 x Lower Intake Manifold Gasket**
• 1 x Upper to Lower Intake Manifold Gasket Set**
• 1 x Oil Filler Gasket
• 1 x Injector Seat Seal Set**
• 1 x Oil Injector Crush Washer Set
• 1 x OMP Crush Washer Set
• 1 x Oil Hose Banjo Crush Washer Set
• 1 x Exhaust Manifold Gasket
• 1 x Throttle Body Gasket
• 1 x Oil Filter Pedestal Gasket

**Due to the Differences between the 192ps, 231ps and R3 engines please select the correct kit from the drop down menu above this menu also includes delivery options for your particular package. (found next to the price)

* We supply the better FD3s rear main oil seal in our kits.

While kits are usually delivered quickly in at times when certain items are out of stock please allow up to 28 days for delivery of your selected rebuild kit. If you require your kit urgently please contact us in advance before ordering.

These engine rebuild kits have been assembles for the convenience of the regular home rebuilder.

As with our own customer rebuilds here at Essex Rotary, we never scrimp on quality but choose to only supply 100% genuine Mazda parts or carefully selected upgrade options in our kits so you can have piece of mind that what your putting back in your engine is the best available.

Non Mazda upgrade parts will always be clearly marked and offered as an alternative on grounds of quality and reliability NOT because they may just be cheaper then genuine parts (if if they are available).

As with any home rebuild we would advise that you first assess what your engine requires as with each tier of kit we offer your will have a much more inclusive set of parts.

The Tier 2 kit offered here is the most common kit sold due to it including many more of the parts typically replaced due to wear. Many builders also decide to replace bearings due to the wear many rotary specialists find on original factory bearings when used with Mazda 5w30 oil from new.

Components marked in green denote the extra parts included in the Tier 2 kit when compared to the tier 1 kit.
Tier 2 Kit includes;

• 6 x Genuine Mazda Apex Seals
• 6 x Long Apex Seal Springs
• 6 x Short Apex Seal Springs
• 12 x Side Seals
• 12 x Side Seal Springs
• 12 Corner Seals
• 12 Corner Seal Plugs
• 4 x Inner Oil Control Ring Seals
• 4 x Outer Oil Control Ring Seals
• 1 x Front Main Oil Seal
• 1 x Rear Main Oil Seal*
• 2 x Stationary Gear Bearings
• 2 x Rotor Bearings
• 1 x Engine Water Seal Kit (please see below for details of what is included in our water seal kit)
• 1 x Silicon Gasket Sealant
• 1 x Hylomar Gasket Sealant

Genuine Mazda Water Seal Kit includes the following components.

• 2 x Inner Water Jacket Seals
• 2 x Outer Water Jacket Seals
• 4 x Dowel “O” Ring
• 1 x Front E-Shaft Bolt “O” Ring
• 1 x Rear Stationary Gear “O” Ring
• 18 x Through Bolt Seals (Dowty Washers)

* We supply the better FD3s rear main oil seal in our kits.

While kits are usually delivered quickly in at times when certain items are out of stock please allow up to 28 days for delivery of your selected rebuild kit. If you require your kit urgently please contact us in advance before ordering.

These engine rebuild kits have been assembles for the convenience of the regular home rebuilder.

As with our own customer rebuilds here at Essex Rotary, we only supply 100% genuine Mazda parts in our kits so you can have piece of mind that what your putting back in your engine is the best available.

As with any home rebuild we would advise that you first assess what your engine requires as with each tier of kit we offer your will have a much more inclusive set of parts.

The Tier 1 kit offered here is the most basic and would be applicable in cases where items like corner seals and side seals and their associated springs as well as bearings are all in good reusable condition and within tolerance.

Tier 1 Kit includes

• 6 x Genuine Mazda Apex Seals
• 6 x Long Apex Seal Springs
• 6 x Short Apex Seal Springs
• 4 x Inner Oil Control Ring Seals
• 4 x Outer Oil Control Ring Seals
• 1 x Front Main Oil Seal
• 1 x Rear Main Oil Seal*
• 1 x Engine Water Seal Kit (please see below for details of what is included in our water seal kit)
• 1 x Silicon Gasket Sealant
• 1 x Hylomar Gasket Sealant

Genuine Mazda Water Seal Kit includes the following components.

• 2 x Inner Water Jacket Seals
• 2 x Outer Water Jacket Seals
• 4 x Dowel “O” Ring
• 1 x Front E-Shaft Bolt “O” Ring
• 1 x Rear Stationary Gear “O” Ring
• 18 x Through Bolt Seals (Dowty Washers)

* We supply the better FD3s rear main oil seal in our kits.

While kits are usually delivered quickly in at times when certain items are out of stock please allow up to 28 days for delivery of your selected rebuild kit. If you require your kit urgently please contact us in advance before ordering.