HKS Hi-Power Single Exit Catback for 2004-2008 RX-8

We can now offer this sought after single exit catback system for your Series 1 RX-8 from HKS.

Inspired and designed from endurance and GT racing in Japan, HKS developed its Hi-Power Exhaust system for turbocharged applications. HKS has incorporated this new race inspired offset muffler and piping design into many street applications, which offers a greater flow and higher-PRM power gains due to the less restrictive design. This is achieved by eliminating unnecessary bends for the straightest exhaust path.

  • HKS Hi Power Catback Exhaust
  • Piping Diameter – 75 mm
  • Tip Diameter – 97 mm
  •  Single Sided Exhaust for N/A and  Turbo Applications with Adjustable Length Ti Tip
  • Lighter then full twin tip backboxes.

HKSSilentHiPowerFittedToRX-8-500px

HKSSilentHiPowerCatbackRX8-380px

By Essex Rotary • 23 January, 2017 • 2:55 pm • Comments Off

HKS Super Power Flow Reloaded Induction Kit for RX-7 FD3s

The Super Power Flow reloaded kit from HKS has been designed to reduce intake air resistance by removing stock intake pipes that can cause turbulence due to the corrugations normally found in them.

HKS70019-AZ006SuperPowerFlowReloadedKitRX7FD3s500px

The pipes are made from aluminium and include 2 x 150mmx60mm diamiter HKS Super Power Flow Air filters in green.

Each filter has an easily replaceable “Dry 3 layer” foam filter mounted in to the signature HKS filter frame.

HKSSuperPowerFlowReloadedFilterDiagram500px

Dry 3 layer type Super Filter was newly developed. Intake efficiency, dust collection performance and replacement cycle are highly balanced. It is long life type filter.

Each kit includes everything required to carry out the full conversions from the stock intake airbox system to the HKS Racing Suction Reloaded setup for your RX-7 FD.

The improvement brought from this conversion should have a noticeable effect to the engine response, and power output.

The Kit includes

  • 2 x Super Power Flow Reloaded Filters
  • 2 x Intake Hard Pipes
  • Silicon Coupelers
  • Hose clamps
  • Fasteners, Gaskets and brackets.

Please note that delivery may take up to 28 days if not in stock.

By Essex Rotary • 31 August, 2016 • 2:02 am • Comments Off

HKS Racing Suction Reloaded Induction Kit for RX-7 FD3s

Take things a leap further with the Racing Suction Reloaded Intake kit.
The Racing Suction reloaded kit from HKS takes things a leap further by improving on the Super Power Flo Reloaded intake system to reduce intake air resistance even further by removing most of the stock intake pipes that can cause turbulence due to the corrugations normally found in them.

HKS70020-AZ001RacingSuctionReloadedKitRX7FD3s500px

The pipes are made from aluminium and include 2 x 150mm-70mm diamiter HKS Racing Suction Reloaded Air filters in Yellow.
Each filter has an easily replaceable “wet 2 layer” foam filter mounted in to the signature HKS filter frame.

HKSRacingSuctionReloadedFilterDiagram500px

Wet 2 Layer Type Super Filter has been used and proofed long time. It reduces intake resistance and special high viscosity glue has high dust collection performance. (These can re replaced with the 3 layer dry type filter element)

Each kit includes everything required to carry out the full converisons from the stock intake airbox system to the HKS Racing Suction Reloaded setup for your RX-7 FD.

The improvement brought from this conversion should have a noticeable effect to the engine response, and power output.

The Kit includes

  • 2 x Racing Suction Reloaded Filters
  • 2 x Intake Hard Pipes
  • Silicon Coupelers
  • Hose clamps
  • Fasteners, Gaskets and brackets.

Please note that delivery may take up to 28 days if not in stock.

By Essex Rotary • • 1:47 am • Comments Off

HKS Super SQV4 Blow Off Valve for RX-7 Fd3s

HKS Super SQV (Sequential Blow Off Valve) uses a unique sequential valve structure and a differential pressure control system, which allows for a broad operating range from low boost to high boost. Its Pull-Type relief design ensures stable operation regardless of the amount of boost pressure. The Super SQV will support new generations of turbocharged vehicles.

HKSSSQV4BlowOffValveTechInfol500px

RX7 FD3s Kit includes

  • SQV Blow Off Valve
  • Recirculation Adapter
  • Vehicle Specifit Fitting adapter
  • O-ring,
  • C-ring (Securing Clip)
  •  Vacuum Hose T-fitting 6×4×6
  • Vacuum Hose T-fitting 4×4×4
  • Inline Air Filter and Tylap.

HKS Part Number: 71008-AZ007

This is a Vehicle Specific Kit for the Fd3s
Recirculation Adapter is Included.
A triple fin and replacing type recirculation adapter are included for vehicle specific kits. (These parts are not included in the universal kit.)
Using this recirculation adapter allows suction return by fabricating the return piping.
(Some kits include Suction Return Kit.)
The vehicle specific Suction Return Kit (Blow-off parts) is available separately.

Please Allow up to 28 days for delivery for delivery.

By Essex Rotary • 28 August, 2016 • 9:13 pm • Comments Off

HKS Super SQV4 Blow Off Valve (Universal Type)

HKS Super SQV (Sequential Blow Off Valve) uses a unique sequential valve structure and a differential pressure control system, which allows for a broad operating range from low boost to high boost. Its Pull-Type relief design ensures stable operation regardless of the amount of boost pressure. The Super SQV will support new generations of turbocharged vehicles.

HKSSSQV4BlowOffValveTechInfol500px

Universal Kit includes

  • SQV Blow Off Valve
  • O-ring,
  • C-ring (Securing Clip)
  •  Vacuum Hose T-fitting 6×4×6
  • Vacuum Hose T-fitting 4×4×4
  • Inline Air Filter and Tylap.

HKS Part Number: 71008-AK001

Please Allow up to 28 days for delivery for delivery.

By Essex Rotary • • 9:01 pm • Comments Off

HKS T04z Turbo Kit for RX-7 FD3s

Single Turbo. Airflow less setup requires F-Con Vpro or similar.
Compatible with air pump.
For use with R Type Intercooler (13001-AZ001,2)

Get the power-up plus for the price of normal change for a exciting driving experience!!

TO4z can produce from lower range of rpm to higher range of rpm to increase the peak power(about 400ps).
As the big single is in advantage of power, FD3S has more boost presure, more air, and more power. And still it has compactness kit for tuning-up. This kit is suitable for one who wants to change the deteriorated stock turbine.

HKST04sFTK-RX7FD3s300px

This Full Turbine kit is low cost single turbine and for novice at single turbine or a RX-7 (FD3S) owner who wants to change the original turbine.
Adopted 4 holes flange to attaching part of the turbine and front pipe which makes it easy to install.
Includes chamber pipe which matches original intercooler layout. With the chamber pipe it supports the original intercooler and R type intercooler V system.

HKS Part Number: 11003-AZ001

This kit may take up to 2-6 weeks for delivery depending on stock availability. please check with up prior to ordering if you require this part urgently.

By Essex Rotary • • 6:38 pm • Comments Off

HKS T04S Turbo Kit for RX-7 FD3s

This is HKS’ Single Turbo kit. Compatible with air pump. Compatible with stock intercooler but we would recommend R Type Intercooler (13001-AZ003,4)

TO4S can produce from lower range of rpm to higher range of rpm to increase the peak power (about 400ps).
As the big single is in advantage of power, FD3S has more boost pressure, more air, and more power. And still it is a compact kit for tuning up your FD3s. This kit is suitable for one who wants to change the deteriorated stock turbine.

HKST04sFTK-RX7FD3s300px

Kit Includes

  • T04s Turbo
  • Exhaust Manifold
  • Down Pipe
  • Bypass Valve
  • Suction Pipe
  • Chamber Pipe
  • Wastegate Assembly
  • Other short parts and fittings.

HKS Part Number: 11003-AZ002

This kit may take up to 2-6 weeks for delivery depending on stock availability. please check with up prior to ordering if you require this part urgently.

By Essex Rotary • • 6:26 pm • Comments Off

HKS R-Type Intercooler Kit for RX-7 FD3s running HKS T04S Turbo Kit

HKS Intercooler Kits 13001-AZ002 for Mazda RX-7 (FD3S Chassis / The Battery May need to be changed for a different time to accommodate the installation of this large intercooler recommended battery spec “38B19R”)

This HKS R-Type Intercooler Kit is designed for a V Mount setup when running HKS TO4S FTK (Full Turbine Kit) or TO4Z SPL Turbo Kit Size : 600mm x 255.6mm x 103mm. View all Mazda RX-7 Intercooler

HKSRTypeIntercooler13001-AZ002FD3s300px
HKS Intercooler Kits are application specific upgrade kits for factory intercooled turbocharged vehicles. Designed specifically for each application; intercooler width, height, thickness and placement are calculated for maximum efficiency and performance. All necessary silicone hoses, brackets, hardware and fittings are included for a complete bolt-on installation.

This Item is made to order direct from HKS Japan and can take up between 6-8 weeks once your order has been placed before it arrived in the UK for delivery.

By Essex Rotary • • 6:09 pm • Comments Off

HKS Silent Hi-Power for RX-7 FD3s

HKS Silent Hi-Power mufflers offer high performance and sporty appearance with the added benefit of reduced noise levels making it the best choice for more mature enthusiasts. Silent Hi-Power mufflers are constructed entirely of SUS304 grade stainless steel for high lustre, long lasting performance. For certain applications, HKS has introduced the “Silent Chamber” which removes a lot of the lower frequency noise that can often be heard into the cabin even when cruising. The silent chamber removes this uncomfortable noise but due to its closed end design, only a minimal amount of exhaust gas flows into it, meaning that the disruption to exhaust gas flow through the entire system is minimized and there is no harm to performance.

To prevent any unwanted delays when processing your order please select the correct application for the year of your RX-7 FD from the drop down menu found next to the “add to cart” button.

Application options;

  • 91/12-98/11 (Ver 1-4)
  • 98/12-02/08 (Ver 5-6)

Image is for illustration purposes only.

Please allow up to a possible 6 weeks is there is no stock within within Europe, Wr recommend you contact us prior to placing your order if you require this part urgently so that we can confirm availability for you.

By Essex Rotary • • 5:39 pm • Comments Off

HKS Silent Hi-Power for RX-7 FC3s

HKS Silent Hi-Power mufflers offer high performance and sporty appearance with the added benefit of reduced noise levels making it the best choice for more mature enthusiasts. Silent Hi-Power mufflers are constructed entirely of SUS304 grade stainless steel for high lustre, long lasting performance. For certain applications, HKS has introduced the “Silent Chamber” which removes a lot of the lower frequency noise that can often be heard into the cabin even when cruising. The silent chamber removes this uncomfortable noise but due to its closed end design, only a minimal amount of exhaust gas flows into it, meaning that the disruption to exhaust gas flow through the entire system is minimized and there is no harm to performance.

Image is for illustration purposes only.

By Essex Rotary • • 5:23 pm • Comments Off

HKS 75mm Downpipe for RX-7 FD3s

Direct bolt-on application made of TIG welded, high quality Mild Steel. The 3″ HKS downpipe has been specifically engineered to allow for great flow through to the main section.

For maximum exhaust flow and quicker turbo spool up, HKS offers downpipes for racing use. Each mandrel bent down pipe is a bolt-on application that will mount to the stock turbos.

This downpipe is designed for twin turbo applications only.

Please allow up to 28 days for delivery of your order, If you require this item quickly we recommend you contact us prior to placing your order to check stock availability.

By Essex Rotary • • 5:00 pm • Comments Off

HKS Legamax Catback for 2004-2008 RX-8

Genuine HKS Legamax Catback system to fir the series 1 RX-8 2004-2008
Made from polished 304 stainless steel this beautiful system will look great for years to come and sound even better. designed to reduce back pressure bu increasing the exhaust flow its worth noting this system is not on the subtle side of the spectrum.

Please note this will not fit the R3 version due to the revised rear bumper design on the R3

These systems can take up to 28 working days for delivery from HKS Japan.

By Essex Rotary • 23 October, 2014 • 9:44 pm • Comments Off

HKS Hybrid Oil Filter with Neodymium Magnet

The filter with integral Neodymium Magnet technology inside

A new concept oil filter which improves oil pressure drop and flow properties by approximately 30% compared to current sports oil filters. Large diameter of “Super Intake Hole” and newly developed low resistance hybrid filter allow low pressure loss. Engine response is alos improved by reducing the stress on the engine.

Most sports oil filters are prerequisite for using the high viscosity oil and therefore filter paper strength is prioritized whilst sacrificing absolute pressure loss properties. HKS Hybrid Sports Oil Filter has readdressed filter strength and overall structure to provide the oil flow that the engine requires and pursue HKS’ ideals in what is required from a sports oil filter.

By Essex Rotary • 8 July, 2013 • 10:55 am • Comments Off
ajax
ajax