Racing Beat Race Exhaust System V2 Extended Tip for RX-8

PLEASE SELECT YOUR CORRECT MODEL APPLICATION FROM THE DROP DOWN MENU NET TO THE “ADD TO CART” BUTTON
The Racing Beat RX-8 Race Exhaust System V2 with 3″ bore and extended tip is a lightweight exhaust system that is intended for race applications. Originally designed to meet the demands of RX-8 autocross/circuit racers, this system is significantly lighter than the stock system and has been designed to meet a race track-imposed sound limit. As compared with our original RX-8 Race exhaust system, the V2 version features an extended tip section which extends rearward through a single bumper opening.

RacingBeatRaceExhaustSystemV2ExtendedTipRX-8Img2-500px
System Weight
The Racing Beat Race Exhaust System has been designed to offer a significant weight reduction over the stock RX-8 system, compare the following:

Stock system + connecting-pipe = 39 lbs
Racing Beat Race Muffler (21 lbs) + Connecting-pipe (8 lbs) = 29 lbs
This is a 25% reduction in weight over the stock system!

All components are handcrafted using 304-stainless steel materials for excellent durability and strength. As a weight saving measure, we decided to eliminate the decorative tip outlet, and instead provided a downward-angled outlet pipe. This pipe reflects exhaust noise downward in an attempt to further dissipate the sound.

Power Output
Performance gains are comparable with our REV 8 Street Exhaust:

Stock production engine – with muffler removed +5 HP
Stock production engine – with RB street or race exhaust + 3.5 HP approx.

Sound Quality
While louder than the stock system, particularly under full throttle, this exhaust system can be used for those looking for a very aggressive exhaust tone for their daily-driven RX-8. A modest driving technique will produce a moderate and tolerable exhaust tone, but jump on the throttle and this exhaust really comes to life. Full throttle does not produce a buzzy or harsh, but a more exotic sound like that of a tuned V-6 engine. During a long-distance trip to the race track during prototype testing for this system, our independent test driver commented that highway cruising was very tolerable, without any droning sounds or harmonics.

This exhaust system is equipped with a stainless steel connecting pipe and all required mounting hardware.

Please Note that this item is special order only, and is subject to our non return policy for special order items under our T&C’s of sale. for more information please check out T&C’s here

PLEASE SELECT YOUR CORRECT MODEL APPLICATION FROM THE DROP DOWN MENU NET TO THE “ADD TO CART” BUTTON

By Essex Rotary • 2 January, 2017 • 5:28 pm • Comments Off

Racing Beat Race Exhaust System for RX-8 inc R3

The Racing Beat RX-8 Race Exhaust System is a lightweight exhaust system that is intended for race applications. Originally designed to meet the demands of RX-8 autocross racers, this system is significantly lighter than the stock system and has been designed to meet a race track-imposed 92db sound limit*.

System Weight
The Racing Beat Race Exhaust System has been designed to offer a significant weight reduction over the stock RX-8 system, compare the following:

RacingBeatRaceExhaustSystemRX-8Img2-500px
Stock system + connecting-pipe = 39 lbs
Racing Beat Race Muffler (17.5 lbs) + Connecting-pipe (8 lbs) = 25.5 lbs
This is a 34% reduction in weight over the stock system!

All components are handcrafted using 304-stainless steel materials for excellent durability and strength. As a weight saving measure, we decided to eliminate the decorative tip outlet, and instead provided a downward-angled outlet pipe. This pipe reflects exhaust noise downward in an attempt to further dissipate the sound.

Power Output
Performance gains are comparable with our REV 8 Street Exhaust:

Stock production engine – with muffler removed +5 HP
Stock production engine – with RB street or race exhaust + 3.5 HP approx.

Sound Quality
While louder than the stock system, particularly under full throttle, this exhaust system can be used for those looking for a very aggressive exhaust tone for their daily-driven RX-8. A modest driving technique will produce a moderate and tolerable exhaust tone, but jump on the throttle and this exhaust really comes to life. Full throttle does not produce a buzzy or harsh, but a more exotic sound like that of a tuned V-6 engine. During a long-distance trip to the race track during prototype testing for this system, our independent test driver commented that highway cruising was very tolerable, without any droning sounds or harmonics.

This exhaust system is equipped with a stainless steel connecting pipe and all required mounting hardware.

*Measured approximately 50′ away from the side of an otherwise stock 2004 RX-8 MT under full throttle. Your actual decibel reading may vary. Other factors, including atmospheric conditions, additional performance accessories, tires, etc.. may cause variations in your actual sound measurement.

Please Note that this item is special order only, and is subject to our non return policy for special order items under our T&C’s of sale. for more information please check out T&C’s here

By Essex Rotary • • 5:24 pm • Comments Off

Racing Beat Modified Holley Intake Kit 74-85 12A / 13B

PLEASE SELECT YOUR CORRECT MODEL APPLICATION FROM THE DROP DOWN MENU NET TO THE “ADD TO CART” BUTTON

From the selection on the drop down box below we offer the popular Racing Beat-modified High Performance Holley Intake System Kit for the 1974-1985 12A & 13B with stock port, street port and bridge port engines.

One of most significant benefits of this complete ready-to-go kit is that is takes all the guesswork, trial-and-error, and frustration out of attempting to assembly your own intake kit! We’ve taken over 40 years of our rotary engine experience and know-how and combined it for you in this complete, ready-to-install kit. Our intake kits has been thoroughly developed and tested using our in-house engine dyno to ensure maximum performance for each specific engine application.

The heart of each intake system is a performance-proven Holley carburetor. Depending on the requirements of each specific application, the carburetor is disassembled by Racing Beat’s carburetor technicians then reworked, retuned, and reconfigured specifically for use with a designated rotary engine application. This process is not a simple “re-jetting” project, but a complex series of steps requiring machining, drilling and reconfiguring of the main and metering bodies, adjustment of the float bowls, and complete replacement of all jets.

RacingBeatHolleyIntakeKit76-85StreetPort500px

Headers must be used with these street port intake systems to achieve maximum horsepower gains.

The carburetors and manifolds used in these Holley kits are also available separately in the “Holley Components” section. Also see the “Intake” section for other related intake components.

Note: Installation of this kit requires use of a high performance fuel pump delivering 6 psi @ 20 gph.

PLEASE SELECT YOUR CORRECT MODEL APPLICATION FROM THE DROP DOWN MENU NET TO THE “ADD TO CART” BUTTON

Please Note that this item is special order only, and is subject to our non return policy for special order items under our T&C’s of sale. for more information please check out T&C’s here

By Essex Rotary • 1 January, 2017 • 8:15 pm • Comments Off

Racing Beat Modified Holley Intake Kit 76-85 12A Stock Port

We offer the extremely popular Racing Beat-modified High Performance Holley Intake System Kit for 1976-1985 12A Stock (non-ported) engines.

Racing Beat’s High Performance Holley Intake System Kit has proven over the years to be an extremely reliable carburetor upgrade, with very “streetable” engine smoothness and drivability characteristics. Fuel economy is comparable to the stock carburetor under similar driving conditions.

Complete Ready-to-Install Kit
One of most significant benefits of this complete ready-to-go kit is that is takes all the guesswork, trial-and-error, and frustration out of attempting to assembly your own intake kit! We’ve taken over 40 years of our rotary engine experience and know-how and combined it for you in this complete, ready-to-install kit. Our intake kits has been thoroughly developed and tested using our in-house engine dyno to ensure maximum performance for each specific engine application.

Rotary-tuned By Racing Beat
The heart of each intake system is a performance-proven 4-barrel Holley carburetor. Depending on the requirements of each specific application, the carburetor is disassembled by Racing Beat’s carburetor technicians then reworked, retuned, and reconfigured specifically for use with a designated rotary engine application. This process is not a simple “re-jetting” project, but a complex series of steps requiring machining, drilling and reconfiguring of the main and metering bodies, adjustment of the float bowls, and complete replacement of all jets. Each application has been fully developed and tested on our in-house dyno facility to ensure maximum performance.

Each comprehensive package includes a Racing Beat cast-aluminum high-rise intake manifold with a vacuum source for power brakes, a Racing Beat-modified Holley carburetor (465 CFM), foam air cleaner and canister assembly, throttle and metering oil pump linkages, and appropriate gaskets. All emissions control fittings are eliminated. This carburetor includes a vacuum-operated choke.

Performance
When installed on a 1976-78 RX-3 or a 1979-85 RX-7 12A engine, this kit increases engine output by approximately 20 HP with the stock exhaust system. However, for increased performance gains we strongly recommend the installation of an exhaust header/presilencer/Power Pulse Muffler combo (10+ HP) or an open exhaust (15+ HP) – resulting in total performance gains of between 30-35 HP depending on your specific intake/exhaust configuration..

The carburetors and manifolds used in these Holley kits are also available separately in the “Holley Components” section.

Note: Installation of this kit requires use of a high delivery fuel pump kit delivering 6 psi @ 20 gph.

Please Note that this item is special order only, and is subject to our non return policy for special order items under our T&C’s of sale. for more information please check out T&C’s here

By Essex Rotary • • 8:01 pm • Comments Off

Racing Beat Air Cleaner Assembly for 71-85 Rotary Engines inc RX-7 FB

Racing Beat’s dyno-proven Power Pulse Air Filter Assembly, for all 1971-85 Stock Carburettor Bodies, is designed specifically for performance. While the assembly uses the same Racing Beat foam air filter element that fits the stock canister, the design of the Power Pulse canister both improves air flow into the carburettor and limits the introduction of dirt particles into the filter element.

The spun aluminium canister pieces are powder-coated white for added durability. There is no provision for emission control valve hose/air pump hose connections on this assembly; however, there is a position available to connect a crankcase breather tube if needed.

The Racing Beat-designed Foam Air Filter Element for all 1971-85 Rotaries consists of a polyurethane foam over a metal screen form that interchanges exactly with the stock element. The foam element can be re-used by periodically cleaning in solvent and re-oiling.

While the element offers no significant increase in air flow when compared to a clean, stock paper element, as the paper element collects dirt its air flow capacity decreases dramatically while the foam element is nearly unaffected.

Please Note that this item is special order only, and is subject to our non return policy for special order items under our T&C’s of sale. for more information please check out T&C’s here

By Essex Rotary • • 7:53 pm • Comments Off

Racing Beat 12a to 13b Conversion Engine Mount for RX-7 FB

Racing Beat’s extremely popular Front Engine Mount allows any 1974-85 13B engine to be installed into any 1979-85 12A RX-7 chassis.

(The stock Mazda front engine mount from a 1984-85 13B GSL-SE engine cannot be used as an alternative due to differences in the design of the GSL-SE chassis front cross member.)

When the Racing Beat engine mount is used in conjunction with the 1984-85 GSL-SE 13B engine using any 1974-85 13B Engine RX-7 oil pan, this laser-cut stainless steel mount greatly simplifies installation. This mount can used with either the stock Mazda engine mounts

Please Note that this item is special order only, and is subject to our non return policy for special order items under our T&C’s of sale. for more information please check out T&C’s here

By Essex Rotary • • 7:49 pm • Comments Off

Racing Beat Full Exhaust System for Standard to Street Ported 79-85 RX-7 FB 12a Engines

Our Racing Beat-designed, “Long Primary” Street Port Complete RX-7 Exhaust System is designed for any 1979-85 RX-7 with a 12A street-ported engine. Designed specifically to optimize the performance benefit of a ported rotary engine, this RX-7 exhaust system will provide the maximum power output possible from an aftermarket RX-7 exhaust system. While louder than the stock system, the dual resonated centre section offers maximum exhaust gas flow and scavenging while reducing sound output to a modest level.

Offered as a packaged set, this kit consists of a Road Race Header, the Street Port Centre Section, and a high flow Power Pulse Main muffler.

The Long Primary system typically adds 5% or more horsepower over a standard Short Primary system on a street ported engine, especially at higher RPMs. This system can also be used on non-ported engines with good results. It is strictly bolt-on, with no welding required. These complete “bolt-on” systems come complete with all required mounting hardware and gaskets. Since this is intended for racing applications, there is no provision for an oxygen sensor on this system.

Please Note that this item is special order only, and is subject to our non return policy for special order items under our T&C’s of sale. for more information please check out T&C’s here

By Essex Rotary • • 5:29 pm • Comments Off

Racing Beat Complete Exhaust System for RX-7 FB with 12a Engine

PLEASE SELECT YOUR CORRECT YEAR APPLICATION FROM THE DROP DOWN MENU NEXT TO THE ADD TO CAR BUTTON.

Racing Beat offers a complete RX-7 high-performance exhaust system for the 1979-85 12A RX-7 (w/manual transmission) which includes our Header/Collector, a Power-Pulse Presilencer, and our legendary Power Pulse main muffler.

These components attach to all stock mounting points, and include all necessary gaskets and hangers. The only component not included is the factory connecting pipe that mounts just ahead of the main muffler. There is no horsepower to be gained by replacing this pipe with a larger diameter assembly. If your factory connecting pipe needs replacing, we suggest you contact your local Mazda dealer or muffler shop.

These exhaust systems offer excellent horsepower gains when you require a muffled exhaust system for your stock-ported engine or your standard RX-7 FB.

The actual horsepower increase depends on which year/model stock RX-7 exhaust system you are comparing to, but a 22% increase at 7000 rpm is typical. Thanks to the combined efforts of the Power-Pulse Presilencer and the Power Pulse Main muffler, the exhaust noise is only slightly higher than stock, with a very low, pleasant character.

Please Note that this item is special order only, and is subject to our non return policy for special order items under our T&C’s of sale. for more information please check out T&C’s here

By Essex Rotary • • 5:24 pm • Comments Off

Racing Beat Power Pulse Main Rear Silencer for 83-85 RX-7 FB

Racing Beat has been manufacturing replacement silencer canisters for rotary powered vehicles for over 25 years. Ordinary replacement silencer don’t stand a chance against the extreme temperatures and pounding exhaust gas pulsation generated by the rotary engine. Many of these replacement silencers will quickly burn up the packing material and self-destruct under these harsh conditions.

Our Power Pulse Main Silencer assemblies interchange exactly with the stock RX-7 silencer on the 1983-85 chassis years. The main body of the silencer measures 8 inches in diameter and 18 inches in length. The heavy-duty construction, both internally and externally, ensures a long life. In a typical application, this silencer adds up to 5 HP over the Mazda factory muffler and is as quiet as a stock silencer with an improved note – deep and throaty, with no annoying metallic character. Gaskets are not included, but are available separately

Please Note that this item is special order only, and is subject to our non return policy for special order items under our T&C’s of sale. for more information please check out T&C’s here

By Essex Rotary • • 5:14 pm • Comments Off

Racing Beat Power Pulse Main Rear Silencer for 81-82 RX-7 FB

Racing Beat has been manufacturing replacement silencer canisters for rotary powered vehicles for over 25 years. Ordinary replacement silencer  don’t stand a chance against the extreme temperatures and pounding exhaust gas pulsation generated by the rotary engine. Many of these replacement silencer will quickly burn up the packing material and self-destruct under these harsh conditions.

This silencer is a large diameter high-flow silencer  designed for street ported engines as well as the stock 1981-1982 RX-7 chassis. It consists of two 1.75-inch tubes that collect into one 2.375-inch tube. It is slightly louder than our other Power Pulse silencers.

This Power Pulse Main Silencer assembly interchanges exactly with the stock RX-7 muffler on the 1981-82 chassis years. The main body of the silencer measures 8 inches in diameter and 18 inches in length. The heavy-duty construction, both internally and externally, ensures a long life. Gaskets are not included, but are available separately.

Please Note that this item is special order only, and is subject to our non return policy for special order items under our T&C’s of sale. for more information please check out T&C’s here

By Essex Rotary • • 5:08 pm • Comments Off

Racing Beat Power Pulse Main Rear Silencer for 79-80 RX-7 FB

Racing Beat has been manufacturing replacement silencer canisters for rotary powered vehicles for over 25 years. Ordinary replacement silencers don’t stand a chance against the extreme temperatures and pounding exhaust gas pulsation generated by the rotary engine. Many of these replacement silencers will quickly burn up the packing material and self-destruct under these harsh conditions.

Racing Beat’s Power Pulse Main silencers assemblies interchange exactly with the stock RX-7 muffler on the 1979-80 chassis years.

RacingBeat79-80RX7FBPowerPulseRearSilencer500px
The main body of the silencer measures 8 inches in diameter and 18 inches in length. The heavy-duty construction, both internally and externally, ensures a long life. In a typical application, this muffler adds up to 5 HP over the Mazda factory muffler and is as quiet as a stock silencer with an improved note – deep and throaty, with no annoying metallic character. Gaskets are not included, but are available separately.

Please Note that this item is special order only, and is subject to our non return policy for special order items under our T&C’s of sale. for more information please check out T&C’s here

By Essex Rotary • • 5:04 pm • Comments Off

Racing Beat Street Port Centre Pipe for 79-85 RX-7 FB

This Street Port Exhaust System Center Section for the 1979-85 RX-7 12A & 13B (except GSL-SE 6-Port) is the same component that comes with Racing Beat’s Complete Street Port Exhaust system.

This center section is designed to bolt-up to the Racing Beat Road Race Header and is compatible for use on the 1979-85 RX-8 12A & 13B (except GSL-SE 6-Port). This connecting pipe features two 2″ tubes that feed into a pair of 20″ long Power Pulse Presilencers to moderate the exhaust noise.

RacingBeat79-85RX7FBStreetPortCentreSection500px
Please Note that this item is special order only, and is subject to our non return policy for special order items under our T&C’s of sale. for more information please check out T&C’s here

By Essex Rotary • • 4:54 pm • Comments Off

Racing Beat Mini Pre-Silencer for 79-80 RX-7 FB

The Racing Beat Mini Power Pulse Presilencer is designed specifically to replace the Heat Exchanger on 1979-1980 RX-7s to either provide a quieter exhaust with a more pleasant character or because the original Heat Exchanger has failed.

This presilencer is 10.625 inches long and 4-inches in outside diameter. The inside diameter, 2 inches, is a straight-through perforated-core design. The end caps are .375-inch thick and fitted with 12mm studs.

The inlet end mates to the Heat Exchanger flange at the rear of our header, while the outlet end mates to a catalytic converter flange. Inside, the perforated core is made of stainless steel and is packed with stainless steel wool.

This small presilencer is also ideal for use in the design of a custom exhaust system when space concerns does allow the placement of a longer presilencer. Multiple units can be installed in sequence as need to meet your sound level needs.

RacingBeat79-80RX7FBMiniPreSilencer500px

A front gasket or rear gasket are not included but are available separtely.

Please Note that this item is special order only, and is subject to our non return policy for special order items under our T&C’s of sale. for more information please check out T&C’s here

By Essex Rotary • • 4:49 pm • Comments Off

Racing Beat Road Race Exhaust Manifold Header for 79-85 RX-7 FB with 13b Conversion

Racing Beat’s Road Race Header is the first step in building a serious racing exhaust system.

This Version is specifically designed to be used in applications where your original 12a engine has been swapped out for a 13b engine.
The engine-to-pipe flange is laser cut from 7/16″ thick flat steel.

Like all of the headers Racing Beat manufacture, the Road Racing Header is constructed with 2″ OD mild steel tubing, .125″ wall thickness, and mandrel-bent tubing throughout.

RacingBeatRoadRaceHeader79-85RX7with12a500px

Please Note that this item is special order only, and is subject to our non return policy for special order items under our T&C’s of sale. for more information please check out T&C’s here

By Essex Rotary • • 4:35 pm • Comments Off

Racing Beat Road Race Exhaust Manifold Header for 79-85 RX-7 FB with 12a

Racing Beat’s Road Race Header is the first step in building a serious racing exhaust system.

The engine-to-pipe flange is laser cut from 7/16″ thick flat steel.

Like all of the headers Racing Beat manufacture, the Road Racing Header is constructed with 2″ OD mild steel tubing, .125″ wall thickness, and mandrel-bent tubing throughout.

RacingBeatRoadRaceHeader79-85RX7with12a500px

Please Note that this item is special order only, and is subject to our non return policy for special order items under our T&C’s of sale. for more information please check out T&C’s here

By Essex Rotary • • 4:32 pm • Comments Off

Essex Rotary Type-99Spec Front Bumper inc Lip for RX-7 FD3s

Another Awesome Replica of the much sought after 99 Sped Front Bumper, This Package includes our one piece 99-aspec front lip ad a discounted bundle price. SAVE £50.00 when you buy them together at the same time.

Made from high quality fiber glass in the UK this front bumper is designed with a “Kit Fit Lip”

Kit Fit Lip
Our Kit Fit Lip allows for perfect fitment even if your stock body panels are out of line a little.
Something that is all too often the case on Vehicles the age of the RX-7.
It is designed to be shaved down where needed to achieve a perfect fit according to your panel alignment. Fitment is recommended to be carried out by a professional. though with some time, the right tools and some patience these bumpers can be fitted at home by someone with competent skill.

DO NOT SIMPLY SHAVE THE WHOLE FIT LIP OFF PRIOR TO INSTALLATION AS YOU WILL BE LEFT WITH LARGE GAPS IN SOME AREAS. 

Please allow up to 3 weeks for delivery of this part if out of stock.

Image is for illustration purposes only

By Essex Rotary • 21 December, 2016 • 10:36 pm • Comments Off

Essex Rotary Type-99Spec One Piece Front Lip Splitter for RX-7 FD3s

Essex Rotary are Proud to offer our new One Piece 99-Spec Front Lip to go with your 99 Spec Front Bumper.

Made from high quality fiber glass in the UK this front bumper is designed with a “Kit Fit Lip”

Fitment is recommended to be carried out by a professional. though with some time, the right tools and some patience these bumpers can be fitted at home by someone with competent skill.

We are pleased to offer a combined discount to customers who may want to order both out 99-sped front bumper and front lip. please view out other item for the bundle price.

Please allow up to 3 weeks for delivery of this part if out of stock.

By Essex Rotary • • 10:31 pm • Comments Off

MSD 8.5mm Super Conductor HT Lead Set for RX-7 FB

Made to order right here at Essex Rotary using all MSD Components.

The MSD 8.5 mm Super Conductor wire is the performance wire engineered from the inside out, the 8.5mm offers everything you have ever wanted in a wire; incredibly low resistance without electronic interference! In a single 12 In. length of Super Conductor wire there is only 40 to 50 ohms of resistance! That is the lowest resistance of any helically wound wire. To accomplish this, MSD use a copper alloy conductor due to it’s great voltage carrying capabilities. The low resistance results in less loss of spark energy so more reaches the spark plug. The conductor is wound extremely tight around a special center core. So tight, that there is over 40 Ft. of conductor wrapped into a single foot of plug wire. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective electro magnetic interference (EMI) choke.

MSDIgnitionLogo170px

  • Copper alloy conductor has a resistance value of less than 50 ohms per foot for superior spark
  • Ferro-magnetic impregnated core creates an effective EMI choke
  • Forty feet of conductor is wound into a single foot of wire for high EMI suppression
  • Conductor core features Dupont Kevlar material for increased tensile strength
  • Durable outer sleeve is a proprietary compound for resistance to high heat or abrasion
  • Stainless steel terminals feature dual crimp tabs to grip wire conductor and outer jacket separately

These MSD HT Leads are made to order right here at Essex Rotary HQ, from genuine MSD components. Available in Red or Black cable options (select your preferred color from the drop down menu before hitting the “add to cart” button.

Custom lengths and configurations available upon request.

By Essex Rotary • 11 December, 2016 • 8:15 pm • Comments Off

NGK Spark Plug Set for RX-7 FB BR8ET

Set of 4 Genuine NGK Spark Plugs for your RX-7 FB the part number for these plugs is BR8ET

Sold as a Set of 4

NGKLogot

By Essex Rotary • • 8:07 pm • Comments Off

Project Mu HC800 Front Pads for Big Brake Kits

Hypercarbon 800 Brake Pads from Project Mu In the correct shape to fit Various BBK’s (Please select your Kit from the drop down menu prior to adding your item to the shopping cart.)

When you need extreme stopping power with extreme performance applications, you need Project Mu HC800 pads. The HC800 is capable of 800 Celsius yet is still able to use effectively with little warming up.

ProjectMuDealerLogo270px
HC800 is a genuine ‘cross over’ pad suitable for both track day and race conditions. The HC800 is extremely capable in competition environments, so use this pad if you are involved in serious track days, rallying, autocross, sprint, time trails etc.

Along with temperature capabilities, HC800 is renowned as a ‘driver’s pad’ with unmatched driver feel and control. Available in many shapes and thicknesses.

Please make your front or rear pad selection from the drop down menu above (next to the price)

(Please select your Kit from the drop down menu prior to adding your item to the shopping cart.)
Image is for illustration purposes only.

By Essex Rotary • 19 November, 2016 • 2:15 pm • Comments Off

HKS Super Oil 13BT 10w45 Full Synthetic Rotary Oil 20 Liter

HKS Super Oil series were developed on the concept of “engine oil is one of the engine part”.HKS’ original “HIPER ESTER” can follow extreme boundary lubrication to any kind of engines on the metal absorbed molecular level. Each engine oil viscosity was determined specifically for the target engine for optimum engine performance. Super Oil is 100% specially blended synthetic oil.

HKS say 13BT oil is the best to use for the rotary turbo engine.
100% synthetic oil can prevent carbon from adhering to inside the housing that usually occurs in a rotary engine. HIPER ESTER maintains the oil film retainment under high temperature and airtightness inside the housing without risk to the rotary engine apex seals.

Sold as 20 Liter Drum

By Essex Rotary • 20 October, 2016 • 9:56 pm • Comments Off

HKS Super Oil 13BT 10w45 Full Synthetic Rotary Oil 4 Liter

HKS Super Oil series were developed on the concept of “engine oil is one of the engine part”.HKS’ original “HIPER ESTER” can follow extreme boundary lubrication to any kind of engines on the metal absorbed molecular level. Each engine oil viscosity was determined specifically for the target engine for optimum engine performance. Super Oil is 100% specially blended synthetic oil.

HKS say 13BT oil is the best to use for the rotary turbo engine.
100% synthetic oil can prevent carbon from adhering to inside the housing that usually occurs in a rotary engine. HIPER ESTER maintains the oil film retainment under high temperature and airtightness inside the housing without risk to the rotary engine apex seals.

Sold as 4 Liter Can

By Essex Rotary • • 9:54 pm • Comments Off

HKS Super Oil 13BT 10w45 Full Synthetic Rotary Oil 1 Liter

HKS Super Oil series were developed on the concept of “engine oil is one of the engine part”.HKS’ original “HIPER ESTER” can follow extreme boundary lubrication to any kind of engines on the metal absorbed molecular level. Each engine oil viscosity was determined specifically for the target engine for optimum engine performance. Super Oil is 100% specially blended synthetic oil.

HKS say 13BT oil is the best to use for the rotary turbo engine.
100% synthetic oil can prevent carbon from adhering to inside the housing that usually occurs in a rotary engine. HIPER ESTER maintains the oil film retainment under high temperature and airtightness inside the housing without risk to the rotary engine apex seals.

Sold as 1 Liter Can

By Essex Rotary • • 9:51 pm • Comments Off

Millers Trident 10w40 Semi Synthetic Engine Oil 5 Liter

A high quality semi synthetic engine oil for your rotary engine.
The Very popular Trident Oil is recommended by many specialists.
Whie there are plenty of other oils out there with higher specifications. if you just want a basic oil that does the job and wont let you down then Millers Trident 10w40 is the one to go for.

Sold in a 5 Liter can.

By Essex Rotary • • 9:37 pm • Comments Off

PIAA LED 6600K W5W 501 Capless Wedge Lamps

PIAA leads the market with LED Bulbs that provide extremely low power consumption and very long life. Standard bulb fittings for easy installation and up to 6 LEDs per bulb for High Intensity.

These capless wedge lamps are ideal for most of the small lamps found in the interior and exterior or your RX

On the RX8 you can find this fitting bulb in the following locations

  • Sidelights
  • Puddle Lights
  • Interior Map Lights
  • Glovebox
  • Door Lights (the small ones on the bottom of the rood that light up when open)
  • Numberplate Lamps
  • Boot Light

On the FD3s Your will find them in the following locations

  • Sidelight Markers (on some model lamps)
  • Interior Lights
  • Numberplate Lamps

These LED units use a 1Watt LED putting out 85Lumins of crisp white light.

Please note these are not road legal, and are intended for off road and show use only.

Sold in pairs

By Essex Rotary • • 9:19 pm • Comments Off

PIAA Xtreme White Plus H11 Bulb Set (Fog Lamps)

PIAA’s Extreme White Plus are possibly the brightest bulbs on the market, The H11 fits the front fog light units on the RX-8. putting out an equivilent of 110watts of light

These bulbs will provide a brilliant Xtreme cool white light that will light up road hazards and street signs long before a normal halogen bulb.

Xtreme White Plus bulbs achieve something few other high-performance bulbs can – and that’s deliver a stunning performance whilst complying with European regulations. Surprisingly only drawing 65/55 watts power, the bulbs convert the output of light to an equivalent of 110/100 watts, appearing far brighter than standard Halogen or Xenon units by emitting a crisp, blue-white, far-reaching beam.

Sold as a pair

By Essex Rotary • • 9:09 pm • Comments Off

PIAA Xtreme White T20 Capless Stop/Tail Lamp Bulb Set

PIAA’s Extreme White T20 bulbs use the standard power however they output light equivalent to a much more powerful bulb. This bulb set will fit the following arras of your Mazda RX-8.

  • Stop/Tail Light

Xtreme White Bulbs represents the latest technology in bulbs from PIAA. As the name implies these bulbs are XTREME

Upgrade your bulbs for a brilliant XTREME cool white light. The closest colour yet to H.I.D. lamp systems at a fraction of the cost

Brilliant in colour and radical in technical performance, these bulbs elevate your car’s road profile to a new level no matter what you drive.

Please note that these bulbs are now E-Marked so are intended for Off Road Use Only

Sold as a Pair

By Essex Rotary • 6 October, 2016 • 10:58 pm • Comments Off

PIAA Xtreme White T20 Capless Single Filiment Bulb Set

PIAA’s Extreme White T20 bulbs use the standard power however they output light equivalent to a much more powerful bulb. This bulb set will fit the following arras of your Mazda RX-8.

  • Reverse Lamps
  • 3rd Brake Light
  • Fog Rear Fog Lamp

Xtreme White Bulbs represents the latest technology in bulbs from PIAA. As the name implies these bulbs are XTREME

Upgrade your bulbs for a brilliant XTREME cool white light. The closest colour yet to H.I.D. lamp systems at a fraction of the cost

Brilliant in colour and radical in technical performance, these bulbs elevate your car’s road profile to a new level no matter what you drive.

Please note that these bulbs are now E-Marked so are intended for Off Road Use Only

Sold as a Pair

By Essex Rotary • • 10:54 pm • Comments Off

PIAA Xtreme White Plus HB4 Lamp Bulb Set

PIAA’s Extreme White Plus are possibly the brightest bulbs on the market, The HB4 fits the headlight units on the RX-7 FD and FC. putting out an equivilent of 115watts of light

These bulbs will provide a brilliant Xtreme cool white light that will light up road hazards and street signs long before a normal halogen bulb.

Xtreme White Plus bulbs achieve something few other high-performance bulbs can – and that’s deliver a stunning performance whilst complying with European regulations. Surprisingly only drawing 65/55 watts power, the bulbs convert the output of light to an equivalent of 110/100 watts, appearing far brighter than standard Halogen or Xenon units by emitting a crisp, blue-white, far-reaching beam.

Sold as a pair

By Essex Rotary • • 10:47 pm • Comments Off

PIAA Xtreme White H9 Bulb Set (Full Beam)

PIAA’s Extreme White H9 bulbs use the standard 65w of power however they output the equivalent of 120w of light power. This bulb set will fit the high beam of your Mazda RX-8

Xtreme White Bulbs represents the latest technology in bulbs from PIAA. As the name implies these bulbs are XTREME

Upgrade your bulbs for a brilliant XTREME cool white light. The closest colour yet to H.I.D. lamp systems at a fraction of the cost

Brilliant in colour and radical in technical performance, these bulbs elevate your car’s road profile to a new level no matter what you drive.

Please note that these bulbs are now E-Marked so are intended for Off Road Use Only

Sold as a Pair

By Essex Rotary • • 10:38 pm • Comments Off

HKS Super Hybrid Panel Filter for RX-8

HKS Super Hybrid Filters are direct replacement panel filters designed to fit into the standard factory air box. Using a 3 layer dry filter, the super hybrid filter separates and catches dust particles within the air and optimises air flow direction through the filter.

The new 3 layer filter system catches larger dust particles with the first layer and smaller particles are filtered out by the 2nd polyurethane layer. This has allowed increased filter life over previous models. Improvements were also made to the way the layers are attached to each other allowing for improved air flow.

HKSSuperHybridAirFilter500px

The frame has been strengthened so as to not distort even in high power applications. The design of the top edge of the frame has been further improved to increase air flow into the filter and by using a “separate shield frame” structure, the frame lip seals tightly against the air box without the need for a separate rubber ring improving the products environmental impact. The two part filter frame structure allows simple replacement of the filter element when it is time to replace the filter. Reusable filters which can be cleaned cannot always restore 100% of its air flow properties whereas new replacement elements can. HKS believes that this is therefore the best method to ensure maximum performance from the air filter every time it is serviced.

By Essex Rotary • 22 September, 2016 • 11:30 am • Comments Off

CUSCO Front and Rear ARB Set for RX-7 FD3s

The excellent CUSCO front and rear anti roll bar kit for your Mazda RX-7 FD, this kit is available at a massive saving over buying them individually

Front ARB is 32mm tubular construction and rear ARB is 18mm solid construction

CuscoLogo

The Cusco Anti Roll Bars replace the factory ARB, and uses the factory mounting locations.  The Cusco ARB will dramatically reduce body roll since its stiffness is greater than the factory bar or if the vehicle is not equipped with one.  The larger diameter and steel strength bar give the Cusco bar more resistance against torsion, which helps keep the vehicle stabilized during cornering and reduces weight transfer.

This kit includes replacement rubber bushings and new clamps if needed

Please allow up to 28 days for delivery when out of stock.

By Essex Rotary • • 9:34 am • Comments Off

Essex Rotary Exclusive Eibach Hubcentric Wheel Spacers for RX-7 FC3s

Exclusive Size Available to Essex Rotary, These are not normally available for the RX-7 FC3s and are available in various sizes.

With the right Eibach Pro-Spacers installed, your car takes on a more aggressive look, with the wheels and tires—filling the wheel arches exactly the way they should.

Fine-tuning your track width doesn’t just enhance your car’s looks it also gives you improved handling performance and optimized roll characteristics. The 20mm Pro-Spacers will let you position your tyres exactly where they will look and perform their best. In many cases, installing the right Pro-Spacers can improve the look and function of your existing wheels and tyres so much, you might not need to buy new custom wheels and tyres at all.

Price quoted is for a pair of Eibach Hubcentric Pro-Spacers.

Please Select your desired size and delivery option in the drop down menu beside the price above.

Please note that these spacers only come in a 5 stud pattern

By Essex Rotary • 17 September, 2016 • 7:55 pm • Comments Off

Magnecor KV85 HT Leads for RX-7 FC3s TurboII

Original equipment replacement. Designed to improve original ignition system performance on vehicles using either electronic engine management systems . Conductor provides excellent RFI and EMI suppression to permanently eliminate the typical performance and fuel-wasting spark energy deterioration of OE and aftermarket carbon conductor wires.

All Magnecor leads are covered by a 10 year guarantee which ensures long lasting reliability and service life.

Please note these will only fit the Turbo II version of the RX-7 FC3s you will require a different set of leads if you have an FC3s EGI (NA version) running the old style distributor

Due to the ace of the FC these days this HT lead kit is made to order and usually takes around 7-10 days for arrival at our shop ready to be shipped on to the customer.

Magnecore Number 45284

By Essex Rotary • 15 September, 2016 • 11:08 am • Comments Off

RE-Amemiya Response Cleaner Air Filter System for 89-91 RX-7 FC Turbi II

Essex Rotary bring you another high quality part from the legendary gods of rotary RE-Amemiya
The Response Cleaner Intake kit is a high quality filter designed to fit in to your FC3s Turbo II produced from 1989-1991

RE-Amemiya boasts a increase in response at higher revs in the FC3S due to their Dual-Entry Air filter intake design. The RE-Amemiya Response Cleaner Air Filter System will be a complete bolt-on kit and is an easy and clean way to increase both response and power for your FC3S.

Special Order only so please allow 2-6 weeks for delivery.

By Essex Rotary • • 10:39 am • Comments Off

Pineapple Racing Heavy Duty (HD) Water Seal Kit for RX-7 FB (74-84)

This is Pineapple Racing’s exclusive Heavy Duty Water Seal kit. Pineapple Racing tested these seals for over 7 years in numerous street and track cars before offering them to our customers. They have proven to be a significant upgrade over the stock water seals. Pineapple Racing use them in all their 5-year warranty motors.
Also, these seals are re-usable if you need to reopen the motor to freshen it, as long as the mileage is not too high or the engine too overheated. In other words, if you make a mistake and blow up your engine or perhaps improperly clearance the seals or whatever, these seals can be removed, allowed to “rest” for about 30 minutes and be reused when you put the engine back together. Stock water seals must be disposed of when freshening an engine, even with just a couple heat cycles.

Kit includes

  • Water jacket o-rings
  • Front cover o-ring (and backup washer, if needed application dependent)
  • Dowel o-rings
  • Rear stationary gear o-ring
  • Oil pedestal o-rings or Gasket (depending on application).
  • Oil Metering Pump “O” Ring
  • Dowty Washer Set (Tension Bolt Washers)

Please note this kit will fit 12a and 13b engines build between 1974 and 1984
Please allow around 28 days for delivery if not in stock.

By Essex Rotary • 6 September, 2016 • 11:11 pm • Comments Off

Pineapple Racing Heavy Duty (HD) Water Seal Kit for RX7 FC3s S5

This is Pineapple Racing’s exclusive Heavy Duty Water Seal kit. Pineapple Racing tested these seals for over 7 years in numerous street and track cars before offering them to our customers. They have proven to be a significant upgrade over the stock water seals. Pineapple Racing use them in all their 5-year warranty motors.
Also, these seals are re-usable if you need to reopen the motor to freshen it, as long as the mileage is not too high or the engine too overheated. In other words, if you make a mistake and blow up your engine or perhaps improperly clearance the seals or whatever, these seals can be removed, allowed to “rest” for about 30 minutes and be reused when you put the engine back together. Stock water seals must be disposed of when freshening an engine, even with just a couple heat cycles.

Kit includes

  • Water jacket o-rings
  • Front cover o-ring (and backup washer, if needed application dependent)
  • Dowel o-rings
  • Rear stationary gear o-ring
  • Oil pedestal o-rings or Gasket (depending on application).
  • Oil Metering Pump “O” Ring
  • Dowty Washer Set (Tension Bolt Washers)

Please note this kit is for a Series 5 RX-7 FC Engine,
Please allow around 28 days for delivery if not in stock.

By Essex Rotary • • 11:09 pm • Comments Off

Pineapple Racing Heavy Duty (HD) Water Seal Kit for RX-7 FD3s 13b REW

This is Pineapple Racing’s exclusive Heavy Duty Water Seal kit. Pineapple Racing tested these seals for over 7 years in numerous street and track cars before offering them to our customers. They have proven to be a significant upgrade over the stock water seals. Pineapple Racing use them in all their 5-year warranty motors.
Also, these seals are re-usable if you need to reopen the motor to freshen it, as long as the mileage is not too high or the engine too overheated. In other words, if you make a mistake and blow up your engine or perhaps improperly clearance the seals or whatever, these seals can be removed, allowed to “rest” for about 30 minutes and be reused when you put the engine back together. Stock water seals must be disposed of when freshening an engine, even with just a couple heat cycles.

Kit includes

  • Water jacket o-rings
  • Front cover o-ring (and backup washer, if needed application dependent)
  • Dowel o-rings
  • Rear stationary gear o-ring
  • Oil pedestal o-rings or Gasket (depending on application).
  • Oil Metering Pump “O” Ring
  • Dowty Washer Set (Tension Bolt Washers)

Please allow around 28 days for delivery if not in stock.

By Essex Rotary • • 11:04 pm • Comments Off

Pineapple Racing Heavy Duty (HD) Water Seal Kit for RX-8

This is Pineapple Racing’s exclusive Heavy Duty Water Seal kit. Pineapple Racing tested these seals for over 7 years in numerous street and track cars before offering them to our customers. They have proven to be a significant upgrade over the stock water seals. Pineapple Racing use them in all their 5-year warranty motors.
Also, these seals are re-usable if you need to reopen the motor to freshen it, as long as the mileage is not too high or the engine too overheated. In other words, if you make a mistake and blow up your engine or perhaps improperly clearance the seals or whatever, these seals can be removed, allowed to “rest” for about 30 minutes and be reused when you put the engine back together. Stock water seals must be disposed of when freshening an engine, even with just a couple heat cycles.

Kit includes

  • Water jacket o-rings
  • Front cover o-ring (and backup washer, if needed application dependent)
  • Dowel o-rings
  • Rear stationary gear o-ring
  • Oil pedestal o-rings or Gasket (depending on application).
  • Oil Metering Pump “O” Ring
  • Dowty Washer Set (Tension Bolt Washers)

Please allow around 28 days for delivery if not in stock.

By Essex Rotary • • 10:57 pm • Comments Off

Pineapple Racing Solid Dowel Pins RX-7 FC, FD, 20b

Pineapple Racing Solid Dowel Pins

  • Helps prevent cracking the plates from hp loads or “ping” (esp. important in the 20B and Series 5 & earlier turbo engines)
  • Spreads the load across the length of the engine.
  • Helps to insure a true engine centerline which reduces engine failure and increasing bearing life
  • Using an external oil line provides a more even oil pressure to the main bearings
  • Low cost, easy installation
  • Available for: 12A, 13B and 20B (12a and 20b Special Order)
  • Custom lengths available (Special Order)

Pineapple Racing Solid Dowel Pins provide an easy, cost effective aid to hp and “ping” loads causing plate cracking or engine damage from loss of clearance from engine flex. Our super strong proprietary material has been meticulously machined to provide what we feel are the most accurate and consistently machined solid dowel pins on the market. The O.D. is accurate to 50 millionth’s! That’s 0.00005”. We “lightly” tapped one end for use with a Dowel Pin Puller.

Replace just the lower dowel pins helps to insure your engine’s centerline remains true. It is a great update requiring no machining.

Replace both lower and upper dowel pins for the maximum improvement. Replacing the upper dowel pins requires the installation of an external oil feed line to the front main oil galley to replace the OEM galley in the OEM dowel pins. Our Oil Pedestal Adapter kit makes this a simple job that can be done with simple hand tools and an electric drill.

High horsepower and the shock loads from “ping” put a tremendous load against the rotor housings. The load deflects the rotor housings outwards, pushing the dowel pin with them. The dowel pins are retained by their fit into the cast iron plates. If the loads are too high, the upper dowel pin can cause the plate(s) to crack. Additionally, since the upper dowel pins are also used as an oil galley, a massive oil leak is also possible. The OEM 20B is especially prone to this type of damage,  and with the price of the “thick” center plate near $1800us, preventing this type of damage pays for itself.

The Pineapple Racing Oil Pedestal Adapter is a stylish, Nickel plated rotor shaped adapter. It easily installs between the existing oil filter pedestal and the rear plate. It features a ¼”NPT port for an external oil line and an 1/8” NPT port for oil pressure or oil temperature.

Please allow up to 28 days for delivery if not in stock.

By Essex Rotary • • 10:45 pm • Comments Off

Pineapple Racing Solid Dowel Pins for RX-7 FB

Pineapple Racing Solid Dowel Pins

  • Helps prevent cracking the plates from hp loads or “ping” (esp. important in the 20B and Series 5 & earlier turbo engines)
  • Spreads the load across the length of the engine.
  • Helps to insure a true engine centerline which reduces engine failure and increasing bearing life
  • Using an external oil line provides a more even oil pressure to the main bearings
  • Low cost, easy installation
  • Available for: 12A, 13B and 20B (12a and 20b Special Order)
  • Custom lengths available (Special Order)

Pineapple Racing Solid Dowel Pins provide an easy, cost effective aid to hp and “ping” loads causing plate cracking or engine damage from loss of clearance from engine flex. Our super strong proprietary material has been meticulously machined to provide what we feel are the most accurate and consistently machined solid dowel pins on the market. The O.D. is accurate to 50 millionth’s! That’s 0.00005”. We “lightly” tapped one end for use with a Dowel Pin Puller.

Replace just the lower dowel pins helps to insure your engine’s centerline remains true. It is a great update requiring no machining.

Replace both lower and upper dowel pins for the maximum improvement. Replacing the upper dowel pins requires the installation of an external oil feed line to the front main oil galley to replace the OEM galley in the OEM dowel pins. Our Oil Pedestal Adapter kit makes this a simple job that can be done with simple hand tools and an electric drill.

High horsepower and the shock loads from “ping” put a tremendous load against the rotor housings. The load deflects the rotor housings outwards, pushing the dowel pin with them. The dowel pins are retained by their fit into the cast iron plates. If the loads are too high, the upper dowel pin can cause the plate(s) to crack. Additionally, since the upper dowel pins are also used as an oil galley, a massive oil leak is also possible. The OEM 20B is especially prone to this type of damage,  and with the price of the “thick” center plate near $1800us, preventing this type of damage pays for itself.

The Pineapple Racing Oil Pedestal Adapter is a stylish, Nickel plated rotor shaped adapter. It easily installs between the existing oil filter pedestal and the rear plate. It features a ¼”NPT port for an external oil line and an 1/8” NPT port for oil pressure or oil temperature.

Please allow up to 28 days for delivery if not in stock.

By Essex Rotary • • 10:43 pm • Comments Off

Pineapple Racing Solid Dowel Pins for RX8

Pineapple Racing Solid Dowel Pins

  • Helps prevent cracking the plates from hp loads or “ping” (esp. important in the 20B and Series 5 & earlier turbo engines)
  • Spreads the load across the length of the engine.
  • Helps to insure a true engine centerline which reduces engine failure and increasing bearing life
  • Using an external oil line provides a more even oil pressure to the main bearings
  • Low cost, easy installation
  • Available for: 12A, 13B and 20B (12a and 20b Special Order)
  • Custom lengths available (Special Order)

Pineapple Racing Solid Dowel Pins provide an easy, cost effective aid to hp and “ping” loads causing plate cracking or engine damage from loss of clearance from engine flex. Our super strong proprietary material has been meticulously machined to provide what we feel are the most accurate and consistently machined solid dowel pins on the market. The O.D. is accurate to 50 millionth’s! That’s 0.00005”. We “lightly” tapped one end for use with a Dowel Pin Puller.

Replace just the lower dowel pins helps to insure your engine’s centerline remains true. It is a great update requiring no machining.

Replace both lower and upper dowel pins for the maximum improvement. Replacing the upper dowel pins requires the installation of an external oil feed line to the front main oil galley to replace the OEM galley in the OEM dowel pins. Our Oil Pedestal Adapter kit makes this a simple job that can be done with simple hand tools and an electric drill.

High horsepower and the shock loads from “ping” put a tremendous load against the rotor housings. The load deflects the rotor housings outwards, pushing the dowel pin with them. The dowel pins are retained by their fit into the cast iron plates. If the loads are too high, the upper dowel pin can cause the plate(s) to crack. Additionally, since the upper dowel pins are also used as an oil galley, a massive oil leak is also possible. The OEM 20B is especially prone to this type of damage,  and with the price of the “thick” center plate near $1800us, preventing this type of damage pays for itself.

The Pineapple Racing Oil Pedestal Adapter is a stylish, Nickel plated rotor shaped adapter. It easily installs between the existing oil filter pedestal and the rear plate. It features a ¼”NPT port for an external oil line and an 1/8” NPT port for oil pressure or oil temperature.

Please allow up to 28 days for delivery if not in stock.

By Essex Rotary • • 10:41 pm • Comments Off

Genuine Mazda FL22 Coolant 5 Liters

Keep your engine cool in the Summer heat and prevent freezing in the winter with Genmuine FL22.

Genuine Mazda FL22 Super Long Life Coolant, This is the coolant you need to be using if your rad cap indicated “FL222 on the top. Premixed and ready to use you will not need to dilute this with De-ionised water before filling your fooling system.

FL22 comes in the optimal mix straight out of the bottle.

Sold in 5 liter bottles We also sell 10 Liter Packs (2 bottles) that can be ordered via the drop down menu (wiith a combines shipping discount applied) A typical cooling system will require around 8 – 8.5 liters, if your running a large capacity Radiator then you may need more.

A Shipping Discount is applied when buying 2 bottles at once (10 Liters from the drop down menu)

By Essex Rotary • 2 September, 2016 • 7:12 pm • Comments Off

HKS Super Power Flow Reloaded Induction Kit for RX-7 FD3s

The Super Power Flow reloaded kit from HKS has been designed to reduce intake air resistance by removing stock intake pipes that can cause turbulence due to the corrugations normally found in them.

HKS70019-AZ006SuperPowerFlowReloadedKitRX7FD3s500px

The pipes are made from aluminium and include 2 x 150mmx60mm diamiter HKS Super Power Flow Air filters in green.

Each filter has an easily replaceable “Dry 3 layer” foam filter mounted in to the signature HKS filter frame.

HKSSuperPowerFlowReloadedFilterDiagram500px

Dry 3 layer type Super Filter was newly developed. Intake efficiency, dust collection performance and replacement cycle are highly balanced. It is long life type filter.

Each kit includes everything required to carry out the full conversions from the stock intake airbox system to the HKS Racing Suction Reloaded setup for your RX-7 FD.

The improvement brought from this conversion should have a noticeable effect to the engine response, and power output.

The Kit includes

  • 2 x Super Power Flow Reloaded Filters
  • 2 x Intake Hard Pipes
  • Silicon Coupelers
  • Hose clamps
  • Fasteners, Gaskets and brackets.

Please note that delivery may take up to 28 days if not in stock.

By Essex Rotary • 31 August, 2016 • 2:02 am • Comments Off

HKS Racing Suction Reloaded Induction Kit for RX-7 FD3s

Take things a leap further with the Racing Suction Reloaded Intake kit.
The Racing Suction reloaded kit from HKS takes things a leap further by improving on the Super Power Flo Reloaded intake system to reduce intake air resistance even further by removing most of the stock intake pipes that can cause turbulence due to the corrugations normally found in them.

HKS70020-AZ001RacingSuctionReloadedKitRX7FD3s500px

The pipes are made from aluminium and include 2 x 150mm-70mm diamiter HKS Racing Suction Reloaded Air filters in Yellow.
Each filter has an easily replaceable “wet 2 layer” foam filter mounted in to the signature HKS filter frame.

HKSRacingSuctionReloadedFilterDiagram500px

Wet 2 Layer Type Super Filter has been used and proofed long time. It reduces intake resistance and special high viscosity glue has high dust collection performance. (These can re replaced with the 3 layer dry type filter element)

Each kit includes everything required to carry out the full converisons from the stock intake airbox system to the HKS Racing Suction Reloaded setup for your RX-7 FD.

The improvement brought from this conversion should have a noticeable effect to the engine response, and power output.

The Kit includes

  • 2 x Racing Suction Reloaded Filters
  • 2 x Intake Hard Pipes
  • Silicon Coupelers
  • Hose clamps
  • Fasteners, Gaskets and brackets.

Please note that delivery may take up to 28 days if not in stock.

By Essex Rotary • • 1:47 am • Comments Off

Blitz Venturi Drive Super Sound BOV for RX-7 FC3s Turbo II

Venturi Drive Super Sound Blow Off Valve – Release Type

The all new ribbed main body dissipates heat more effectively and the venturi shaped funnel creates a sharp dynamic sound.
Venturi Drive dump valves also feature “Dual Drive” for maximum response, a small port for low boost and a larger port for high boost.

The main purpose of the dump valves is to improve the response of the turbo by quickly releasing the boost pressure before the turbo stalls.

They are made from die cast polished aluminium with a brass piston and a rubber diaphragm, meaning they can easily cope with boost pressures up to 1.2 bar with the supplied spring.
There is an alternative hard spring for boost pressures above 1.2bar and also a soft spring available for very low boost applications.

Blitz VDSS Blow Off Valves  are also tension adjustable.

BlitzVenturiDriveBlowOffValve500px

Blitz70190VenturiDriveBlowOffValveKitRX7FC3s300px

This kit includes everything needed to install onto your vehicle. (Please remember that most of these kits are designed to install on a standard setups so if you intend to install this on a single turbo conversion some modification may be required)

This kit is a Release Type

Please allow up to 28 days for delivery for this item if not in stock.

By Essex Rotary • • 12:02 am • Comments Off

Blitz Venturi Drive Super Sound BOV Kit for RX-7 FD3s

Venturi Drive Super Sound Blow Off Valve – Release Type
The all new ribbed main body dissipates heat more effectively and the venturi shaped funnel creates a sharp dynamic sound.

Venturi Drive dump valves also feature “Dual Drive” for maximum response, a small port for low boost and a larger port for high boost.
The main purpose of the dump valves is to improve the response of the turbo by quickly releasing the boost pressure before the turbo stalls.

They are made from die cast polished aluminium with a brass piston and a rubber diaphragm, meaning they can easily cope with boost pressures up to 1.2 bar with the supplied spring.

There is an alternative hard spring for boost pressures above 1.2bar and also a soft spring available for very low boost applications.

Blitz VDSS Blow Off Valves  are also tension adjustable.

Blitz70191VenturiDriveBlowOffValveKitRX7FD3s300px

BlitzVenturiDriveBlowOffValve500px

This kit includes everything needed to install onto your vehicle. (Please remember that most of these kits are designed to install on a standard setups so if you intend to install this on a single turbo conversion some modification may be required)

This kit is a Release Type

Please allow up to 28 days for delivery for this item if not in stock.

By Essex Rotary • 30 August, 2016 • 11:52 pm • Comments Off

Blitz CS Edition Intercooler Kit with Pipework for RX-7 FD3s

Large FD3s Intercooler Kit with Induction Pipeing (CS Edition)

No compromise for performance and the lowest possible price for maximum cost-to-performance ratio achieved. Inner tube type core is utilized to achieve light weight construction, and offset fin for maximum cooling efficiency and low pressure loss.
Louver type fin is employed for outer fin for better airflow and maximum cooling performance.

Pipes are designed with minimum bend and made of aluminum for weight reduction and less pressure loss.
Side tanks and pipes are polished for better look.

CS stands for Chemical Shine, a process of chemical treatment which is applied to the intercooler core to produce a durable shine.

Kit Includes

  • Blitz Front Mount CS Edition Intercooler
  • Alloy Intercooler pipes
  • Silicon Joining hoses
  • Brackets and Clamps

Blitz13119CSIntercoolerRX7FD3s500px

Please note that the stock air cleaner box cannot be used. Please use Blitz SUS power air cleaner (part no 26101) and the battery will require resizing.

If not in stock please allow up to 6 weeks for delivery, If you require this part urgently please contact us prior to ordering so we may check stock availability.

By Essex Rotary • • 11:35 pm • Comments Off

TRUST GReddy TD06-20g Turbo Kit for RX-7 FD3s

Vehicles that are already equipped with factory turbochargers have engines with large potential for power that cannot be fully obtained by using the original turbocharger(s). Big gains can be found by upgrading the exhaust, intake, blow-off valve and intercooler and adding more fuel and boost, but by also replacing the stock turbocharger with a properly sized GReddy turbo upgrade kit, you can experience new levels of power. Kits are available for most popular Japanese turbo vehicles, and for many, we offer a selection of kits with various sizes of turbos from mild upgrades to full-on race ready kits. Depending on application, kits will either bolt onto factory manifolds with integral wastegates or use hand-made SUS manifolds with external wastegates.

Kit Includes

  • GReddy single TD06-20G 16cm² turbo
  • SUS Manifold 50mm ex mani
  • Airinx Filter,
  • TIAL External Wastegate  (TIAL09 return)
  • Fittings

TRUSTGReddyTD06SH25gTurboKitRX7FD3s500px

Image is for illustration purposes only as actual kit may vary slightly from that pictured.

This kit is special order and may take up to 8 weeks for delivery.

By Essex Rotary • • 11:12 pm • Comments Off

TRUST GReddy TD06SH-25g Turbo Kit for RX-7 FD3s

Vehicles that are already equipped with factory turbochargers have engines with large potential for power that cannot be fully obtained by using the original turbocharger(s). Big gains can be found by upgrading the exhaust, intake, blow-off valve and intercooler and adding more fuel and boost, but by also replacing the stock turbocharger with a properly sized GReddy turbo upgrade kit, you can experience new levels of power. Kits are available for most popular Japanese turbo vehicles, and for many, we offer a selection of kits with various sizes of turbos from mild upgrades to full-on race ready kits. Depending on application, kits will either bolt onto factory manifolds with integral wastegates or use hand-made SUS manifolds with external wastegates.

Kit Includes

  • GReddy single TD06SH 25G 16cm² turbo
  • SUS Manifold 50mm ex mani
  • Airinx Filter,
  • TIAL External Wastegate  (TIAL09 return)
  • Fittings

TRUSTGReddyTD06SH25gTurboKitRX7FD3s500px

This kit is special order and may take up to 8 weeks for delivery.

By Essex Rotary • • 11:01 pm • Comments Off

TRUST GReddy T78-33D Turbo Kit for RX-7 FD3s

Get big power gains with the GReddy T78 Turbo Kit.
All GReddy Turbo and Turbo Upgrade kits exclusively use GReddy Spec. Mitsubishi Turbochargers. Our kits are design and tested to match the best-sized turbo per application. This means you get good response, smooth driveability, performance that can still be upgraded, and lasting reliability.

Kit Includes

  • Greddy T-78 Turbo (T78-33D 17cm)
  • Stainless Steel SUS Manifold
  • Stainless Steel SUS Downpipe
  • Racing Wastegate (50mm & Type RO8)
  • All Lines and fittings

TRUSTGReddyT7833DTurboKitRX7FD3s500px

Image is for illustration only and actual kit may vary from that in the picture.

Special Order Item, this may take up to 8 weeks for delivery.

By Essex Rotary • • 10:49 pm • Comments Off

Aluminium Door Handel Set for RX-7 FD3s

Essex Rotary bring your these high quality Aluminium Replacements developed and made in the USA by Rotarty13b1

The Rotary13b1 Aluminium Mazda 3rd Gen RX-7 Door Handles are here! The stock plastic exterior handles are well known to snap off from use over the years, leaving you to open the FD from the passenger side. With our replacement FD3S Aluminum door handles, they will now last as long as you own the car!

Rotary13b1AluminiumDoorHandelSetSilverRX7FD3s150px

Door handles are sold in pairs, we would like FD owners to replace both, so they match. Replacement is not hard if you have taken off the interior door panels off before. Installation should take no more than 30-40 mins per side, if you are taking your time.

Available in Black or Silver
Please select your color choice from the dropdown menu found next to the add to cart button.

Please allow up to 28 days for delivery if not in stock.

By Essex Rotary • • 10:10 pm • Comments Off

Bilstein B6 Sport Shock Absorbers for RX-7 FC3s

Refresh your FC’s tired suspension with Bilstein’s B6 Sport dampers.

Performance you can feel.

If you expect more damping power from your shock absorber even under loads but dont want to opt for an all out sports model.

The Bilstein B6 is the ideal solution.

The product benefits at a glance:

  • Increased power reserves and service life – even when pulling transporters and trailers or during frequent journeys with loads
  • Optimum adhesion and enhanced lane change stability in both day to day and extreme situations
  • Marked improvement in safety and sportiness without additional spring changes (lowering)
  • Bilstein gas pressure technology
  • Bilstein mono – tube/Upside – Down technology – made in Germany
  • Road – tested by Bilstein and fine – tuned
  • No German TuV registration required

Sold Individually
Please select front or rear from the drop down menu

Save Oner 10% when buying a complete set for your FC plus savings on combined delivery.

Image is for illustration purposes only and may not represent the actual damper design you will receive.
Please allow up to 28 days for delivery.

By Essex Rotary • 29 August, 2016 • 11:35 am • Comments Off

TRUST GReddy Type FV Blow Off Valve for RX-7 Fd3s

The GReddy BOV FV is a new generation of blow off valve. The unique “Floating Valve” design incorporates a revised adjustable dual spring system, while maintaining the advantages of the previous models’ push valve structure and silicone diaphragm control. The improved design makes spring preload setting less dependent on the idle, while providing better response, increased valve travel, more air-flow and added resistance to premature valve lift under all conditions. Also maintained is a slimer CNC outlet with discharge ports to draws surrounding air to amplify the blow-off sound, however this can be replaced with optional re-circulation adapters in various sizes.

This Kit is Designed to run on the standard RX-7 Twin turbo Setup, Modification to enable use on a single Turbo Should be possible with the Aluminum Adaptor Sold Seperately.

By Essex Rotary • 28 August, 2016 • 10:14 pm • Comments Off

TRUST Greddy Universal General Purpose Breather Tank

Designed originally for racing engines, today’s compact production engines can also benefit from the use of GReddy’s Radiator Breather Tank. This tank efficiently removes trapped hot air pockets within the cooling system which can eventually cause over heating, especially during spirited driving. Allows the radiator to perform more effectively, improving overall cooling performance. Requires radiator hose adapter for installation (sold separately).

TRUSTGReddyGeneralPurposeBreatherTank500px

This Item is a Universal fit so may require some custom pipe work to work correctly on some vehicles.

Please allow up to 28 days for delivery is not in stock.

By Essex Rotary • • 10:08 pm • Comments Off

TRUST GReddy Profec MAP Expansion Module

Expand your GReddy Profec OLED Boost Controller to do so much more.
The GReddy Profec MAP connects to the current GReddy Profec OLED Boost Controller and, through boost maps, provides even finer control over your vehicle’s boost pressure. Boost correction is not the only added function in the addition of the Profec MAP! The following features have been added:All parameter settings can be set by PC via USB cable (sold separately), Display Gear Position, Speed, RPM, Engine Temp, Throttle Position, Backlight dimming and scramble boost switching functions.

Overview
Expand your boost control with additional features using the new Greddy Profec MAP! For use with Greddy Profec (P/N 15500214) This new MAP easily plugs in between the Profect Display/Control unit and Profec main unit, with some additional connections depending on application.

TRUSTGReddyProfecMAPExpansionUnit300px

TRUSTGReddyProfecMAPExpansionUnitTechInfo300px

Features

  • Boost Map Correction – Fine boost tuning settings via 10×10 boost maps (Load vs Duty %)
  • Boost Correction by RPM, Throttle Position, Speed, Gear Position, or Water Temp Example: Boost can be lowered if the car is not within the desired operating temperature. Using the Gear Position feature, boost can bet adjusted individually for each gear and engine speed.
  • Addtional Profec monitoring and data loging via PC software.
  • AUX input for Over Take Boost Function future using optional Remote Swithcing System
  • PC Compatiable (Profec MAP software) with use of mini-USB to USB cable (sold seperately)

Notes

  • Plugs-in easily inbetween Profec Display/Control unit and Profec main unit (Additional connections depending on application.)
  • PC Compatiable (Profec MAP software) with use of mini-USB to USB cable (sold seperately)
    • OS: (Japanese, English) Windows Vista, Windows 7 (32bit, 64bit)
    • CPU: 1GHz or more 32bit or 64bit processor
    • Memory: 1GB or more
    • HDD free space: 20MB or more

    Please allow up to 28 days for delivery if not in tock,

By Essex Rotary • • 9:47 pm • Comments Off

HKS Super SQV4 Blow Off Valve for RX-7 Fd3s

HKS Super SQV (Sequential Blow Off Valve) uses a unique sequential valve structure and a differential pressure control system, which allows for a broad operating range from low boost to high boost. Its Pull-Type relief design ensures stable operation regardless of the amount of boost pressure. The Super SQV will support new generations of turbocharged vehicles.

HKSSSQV4BlowOffValveTechInfol500px

RX7 FD3s Kit includes

  • SQV Blow Off Valve
  • Recirculation Adapter
  • Vehicle Specifit Fitting adapter
  • O-ring,
  • C-ring (Securing Clip)
  •  Vacuum Hose T-fitting 6×4×6
  • Vacuum Hose T-fitting 4×4×4
  • Inline Air Filter and Tylap.

HKS Part Number: 71008-AZ007

This is a Vehicle Specific Kit for the Fd3s
Recirculation Adapter is Included.
A triple fin and replacing type recirculation adapter are included for vehicle specific kits. (These parts are not included in the universal kit.)
Using this recirculation adapter allows suction return by fabricating the return piping.
(Some kits include Suction Return Kit.)
The vehicle specific Suction Return Kit (Blow-off parts) is available separately.

Please Allow up to 28 days for delivery for delivery.

By Essex Rotary • • 9:13 pm • Comments Off

HKS Super SQV4 Blow Off Valve (Universal Type)

HKS Super SQV (Sequential Blow Off Valve) uses a unique sequential valve structure and a differential pressure control system, which allows for a broad operating range from low boost to high boost. Its Pull-Type relief design ensures stable operation regardless of the amount of boost pressure. The Super SQV will support new generations of turbocharged vehicles.

HKSSSQV4BlowOffValveTechInfol500px

Universal Kit includes

  • SQV Blow Off Valve
  • O-ring,
  • C-ring (Securing Clip)
  •  Vacuum Hose T-fitting 6×4×6
  • Vacuum Hose T-fitting 4×4×4
  • Inline Air Filter and Tylap.

HKS Part Number: 71008-AK001

Please Allow up to 28 days for delivery for delivery.

By Essex Rotary • • 9:01 pm • Comments Off

HKS T04z Turbo Kit for RX-7 FD3s

Single Turbo. Airflow less setup requires F-Con Vpro or similar.
Compatible with air pump.
For use with R Type Intercooler (13001-AZ001,2)

Get the power-up plus for the price of normal change for a exciting driving experience!!

TO4z can produce from lower range of rpm to higher range of rpm to increase the peak power(about 400ps).
As the big single is in advantage of power, FD3S has more boost presure, more air, and more power. And still it has compactness kit for tuning-up. This kit is suitable for one who wants to change the deteriorated stock turbine.

HKST04sFTK-RX7FD3s300px

This Full Turbine kit is low cost single turbine and for novice at single turbine or a RX-7 (FD3S) owner who wants to change the original turbine.
Adopted 4 holes flange to attaching part of the turbine and front pipe which makes it easy to install.
Includes chamber pipe which matches original intercooler layout. With the chamber pipe it supports the original intercooler and R type intercooler V system.

HKS Part Number: 11003-AZ001

This kit may take up to 2-6 weeks for delivery depending on stock availability. please check with up prior to ordering if you require this part urgently.

By Essex Rotary • • 6:38 pm • Comments Off

HKS T04S Turboless Kit for RX-7 FD3s

This is HKS’ T04s Single Turbo kit conversion kit WITHOUT THE TURBO. Compatible with air pump. Compatible with stock intercooler but we would recommend R Type Intercooler (13001-AZ003,4)

TO4S can produce from lower range of rpm to higher range of rpm to increase the peak power (about 400ps).
As the big single is in advantage of power, FD3S has more boost pressure, more air, and more power. And still it is a compact kit for tuning up your FD3s. This kit is suitable for one who wants to change the deteriorated stock turbine.

HKST04sFTK-RX7FD3s300px

Kit Includes

  • Exhaust Manifold
  • Down Pipe
  • Bypass Valve
  • Suction Pipe
  • Chamber Pipe
  • Wastegate Assembly
  • Other short parts and fittings.

PLEASE NOTE THIS KIT NOED NOT INCLUDE THE T04S TURBO
HKS Part Number: 11003-AZ002ZZ

This kit may take up to 2-6 weeks for delivery depending on stock availability. please check with up prior to ordering if you require this part urgently.

By Essex Rotary • • 6:33 pm • Comments Off

HKS T04S Turbo Kit for RX-7 FD3s

This is HKS’ Single Turbo kit. Compatible with air pump. Compatible with stock intercooler but we would recommend R Type Intercooler (13001-AZ003,4)

TO4S can produce from lower range of rpm to higher range of rpm to increase the peak power (about 400ps).
As the big single is in advantage of power, FD3S has more boost pressure, more air, and more power. And still it is a compact kit for tuning up your FD3s. This kit is suitable for one who wants to change the deteriorated stock turbine.

HKST04sFTK-RX7FD3s300px

Kit Includes

  • T04s Turbo
  • Exhaust Manifold
  • Down Pipe
  • Bypass Valve
  • Suction Pipe
  • Chamber Pipe
  • Wastegate Assembly
  • Other short parts and fittings.

HKS Part Number: 11003-AZ002

This kit may take up to 2-6 weeks for delivery depending on stock availability. please check with up prior to ordering if you require this part urgently.

By Essex Rotary • • 6:26 pm • Comments Off

HKS R-Type Intercooler Kit for RX-7 FD3s running HKS T04S Turbo Kit

HKS Intercooler Kits 13001-AZ002 for Mazda RX-7 (FD3S Chassis / The Battery May need to be changed for a different time to accommodate the installation of this large intercooler recommended battery spec “38B19R”)

This HKS R-Type Intercooler Kit is designed for a V Mount setup when running HKS TO4S FTK (Full Turbine Kit) or TO4Z SPL Turbo Kit Size : 600mm x 255.6mm x 103mm. View all Mazda RX-7 Intercooler

HKSRTypeIntercooler13001-AZ002FD3s300px
HKS Intercooler Kits are application specific upgrade kits for factory intercooled turbocharged vehicles. Designed specifically for each application; intercooler width, height, thickness and placement are calculated for maximum efficiency and performance. All necessary silicone hoses, brackets, hardware and fittings are included for a complete bolt-on installation.

This Item is made to order direct from HKS Japan and can take up between 6-8 weeks once your order has been placed before it arrived in the UK for delivery.

By Essex Rotary • • 6:09 pm • Comments Off

HKS Silent Hi-Power for RX-7 FD3s

HKS Silent Hi-Power mufflers offer high performance and sporty appearance with the added benefit of reduced noise levels making it the best choice for more mature enthusiasts. Silent Hi-Power mufflers are constructed entirely of SUS304 grade stainless steel for high lustre, long lasting performance. For certain applications, HKS has introduced the “Silent Chamber” which removes a lot of the lower frequency noise that can often be heard into the cabin even when cruising. The silent chamber removes this uncomfortable noise but due to its closed end design, only a minimal amount of exhaust gas flows into it, meaning that the disruption to exhaust gas flow through the entire system is minimized and there is no harm to performance.

To prevent any unwanted delays when processing your order please select the correct application for the year of your RX-7 FD from the drop down menu found next to the “add to cart” button.

Application options;

  • 91/12-98/11 (Ver 1-4)
  • 98/12-02/08 (Ver 5-6)

Image is for illustration purposes only.

Please allow up to a possible 6 weeks is there is no stock within within Europe, Wr recommend you contact us prior to placing your order if you require this part urgently so that we can confirm availability for you.

By Essex Rotary • • 5:39 pm • Comments Off

HKS Silent Hi-Power for RX-7 FC3s

HKS Silent Hi-Power mufflers offer high performance and sporty appearance with the added benefit of reduced noise levels making it the best choice for more mature enthusiasts. Silent Hi-Power mufflers are constructed entirely of SUS304 grade stainless steel for high lustre, long lasting performance. For certain applications, HKS has introduced the “Silent Chamber” which removes a lot of the lower frequency noise that can often be heard into the cabin even when cruising. The silent chamber removes this uncomfortable noise but due to its closed end design, only a minimal amount of exhaust gas flows into it, meaning that the disruption to exhaust gas flow through the entire system is minimized and there is no harm to performance.

Image is for illustration purposes only.

By Essex Rotary • • 5:23 pm • Comments Off

HKS 75mm Downpipe for RX-7 FD3s

Direct bolt-on application made of TIG welded, high quality Mild Steel. The 3″ HKS downpipe has been specifically engineered to allow for great flow through to the main section.

For maximum exhaust flow and quicker turbo spool up, HKS offers downpipes for racing use. Each mandrel bent down pipe is a bolt-on application that will mount to the stock turbos.

This downpipe is designed for twin turbo applications only.

Please allow up to 28 days for delivery of your order, If you require this item quickly we recommend you contact us prior to placing your order to check stock availability.

By Essex Rotary • • 5:00 pm • Comments Off

Project Mu G-Four 335 Brake Fluid 1L

Totally reliable brake fluid that combines a boiling point so high it’s in another dimension with durability and maintainability. You know it’s time to change your G-four 335 brake fluid, which can reach close to 300C, when the color changes from green to crystal clear.

Project Mu’s G-Four 335 Brake Fluid had one of the highest boiling points in the industry at 335℃, giving you confidence on the brakes no matter how hard you lean on them.

Brake fluid is often overlooked as a performance upgrade when looking at brakes, When upgrading your brake system, you should always improve the quality of your fluid to match the increased demands on your braking system.ProjectMuDealerLogo270px

Specs:

  • Type : Glycol/100% Synthetic
  • Dry Boiling Point : 335℃
  • Wet Boiling Point : 221℃
  • Volume Per Bottle : 1000ml

DO NOT MIX WITH OTHER OILS

Normally in stock however please check prior to ordering if you need this brake fluid urgently.

By Essex Rotary • • 12:30 pm • Comments Off

Essex Rotary Enhanced Tail Light Gasket Set for 08-12 RX-8 R3

After nearly a year of development we are please to release the the new Essex Rotary upgraded tail light gaskets for the R3 RX-8, we have reworked the original design to now make them suitable for the R3..


These gaskets are made from high quality neoprene instead of the the thin sponge of the Mazda OEM gaskets.



The price for Mazda Original Gaskets are £34.28 EACH, the Essex Rotary Gaskets represent around a 50% saving over the Mazda Gaskets.

By Essex Rotary • 19 August, 2016 • 6:16 pm • Comments Off

Essex Rotary Exclusive Alternator Replacement for RX-7 FC3s Turbo II

This Alternator has been specially selected by us as an ideal replacement for your original alternator if it has failed.

With a 100A output and and OEM quality fitment your all set to power up your FC Turbo II once again.

EssexRotaryRX7FCTIIAlternator500px

This item can take up to 28 days for delivery once ordered. though typical delivery times are much quicker.

By Essex Rotary • • 6:12 pm • Comments Off

Essex Rotary Exclusive Alternator Replacement for RX-7 FD3s

This Alternator has been specially selected by us as an ideal replacement for your original alternator if it has failed.

With a 100A output and and OEM quality fitment your all set to power up your FD once again.

EssexRotaryRX7FDAlternator500px

This item can take up to 28 days for delivery once ordered. though typical delivery times are much quicker.

By Essex Rotary • • 6:04 pm • Comments Off

SCG Pacific Blue® Wash & Wax

Wash And Wax Without A Scratch!

Sometimes we think Wash & Wax really means Wash & Scratch. So at Surf City Garage, we decided to do something about it.

Did you know the most common way to scratch your car is by washing it? In fact, most paint damage can be traced back to the use of economy car washes. Well … Pacific Blue is the cure for the common scratch.

Pacific Blue Wash & Wax is gentle and safe, but leaves the surface clean enough to eat off of. This super-concentrated #1 Carnauba wax formula isolates dirt particles so they can’t scratch your paint. Wash & Wax without a scratch.

You get Carnauba wax protection; it won’t strip your existing wax.

It even smells fresh, just like the Pacific itself. So the next time your car needs a great wash and gentle wax, Surf’s Up with Pacific Blue

What Makes Surf City Garage® Enthusiast Grade® Detailing Products Different?

Pacific Blue® Wash & Wax:-

  • Super-concentrated for the lowest cost per wash – 1oz. per wash
  • Safest wash you can buy. Totally scratch-free.
  • Longest-lasting protection. Contains highest volume of pure #1 carnauba wax.

Available in both 16oz and 32oz bottles

By Essex Rotary • 11 August, 2016 • 10:43 pm • Comments Off

Grit Guard Bucket Wash with Gamma Seal

Of all the processes done to maintain your car’s finish, car washing is the most important. However, what many people don¹t realize is it’s also the biggest opportunity for you to introduce damage, such as swirls and light scratches, to your delicate painted surfaces. The solution? The Surf City Garage Car Wash Bucket With Grit Guard Insert.

Made of durable plastic and capped with a Gamma sealed screw-on lid, the Surf City Garage Car Wash Bucket is the first line of defense in your war against swirl marks. With each dunk into your bucket with your wash pad, the Grit Guard Insert can be used like a wash board to release the abrasive particles, dust, dirt and debris you¹ve removed from your car.

The patented design allows those little gritty bits to fall through, keeping your soapy water clean and free of any swirl-causing debris.

Whether you’re a weekend warrior or a serious car detailer, the Surf City Garage Car Wash Bucket with Grit Guard Insert is a MUST HAVE in your car care arsenal.

By Essex Rotary • • 10:36 pm • Comments Off

SCG Absolutely Aluminum™ Perfect Polish

Tried everything to shine that stubborn tarnished aluminium? Economy brand polishes may help, but they use harsh abrasives that leave scratches. Not on your ride! Absolutely Aluminium is the answer.

It works twice as fast as paste polishes and is easier to use, creates a mirror finish, is scratch-free, removes road film and restores tarnished aluminium. It’s safe to use on all metals, but is fine-tuned to be safe on soft aluminium. Get the most reflective shine (with no scratches!) possible from your aluminium.

Surf City Garage’s Detailing Tip:

When your wheels are incredibly dull or tarnished, nothing will polish them up like Absolutely Aluminium. To bring them back to that “just out of the box look,” turn to Diamond Edge Wheel Dressing.

All our Perfect Polishes are ideal for removing overspray and oxidation off glass as well as for clearing up yellowed headlights.

What Makes Surf City Garage® Enthusiast Grade® Detailing Products Different?

    Absolutely Aluminium™ Perfect Polish:

  • Super advanced, non-abrasive formula will not scratch or damage the metal.
  • Chemical abrasion technology removes only the oxidation and surface rust.
  • Ultra efficient. Requires very little product to obtain mirror finish.

By Essex Rotary • • 10:30 pm • Comments Off

Endless SSY Street Sport Brake Pads for RX-8

Street driving conditions can vary widely. A street pad may need to operate at a variety of temperatures and speeds, Thus, variable braking force is needed. Our SS-Y compound has always focused on improved initial bite and swift fade recovery on the street. The ever-growing popularity of the SS-Y compound is due to its constant development. A great street pad with excellent initial bite that holds constant as the pads wear.

Average coefficient of friction is .38-.48 mu.

Comparable data:
Initial bite – 10
Dust level – 7
Noice level – 7
Durability – 7
Control1 – 8
Pedal feel – 8

Operating Temp Range 0C-400C

Recommended for:

Those looking to increase brake performance on the street
Those looking to enjoy sporty street driving

Please allow up to 28 days for delivery from the date of order.

By Essex Rotary • 12 July, 2016 • 11:45 pm • Comments Off

Endless ME20 “Track” Brake Pads for RX-8

ME20 is a semi-metallic compound, developed for racing and rally. It is a step up initial bite and is more “straight-forward” with regards to brake power. Originally developed for BTCC Super Touring cars where you have high traction afforded by suspension setup and tire compounds. The pedal feel and brake power is excellent and equal across the speed range with an easy modulation in all instances. With ME20 it is possible to perform very hard and late braking into corners. As with the friction and bite the ME20 is a step up in heat resistance compared to the ME22 and it has shown a very good stable brake performance at high disc temperatures over 650 °C. The wear characteristics of both pads and discs are low, and for cold weather and wet conditions it retains the same excellent resistance to water fade.

Please allow up to 28 days for delivery once ordered.

By Essex Rotary • • 11:40 pm • Comments Off

Endless MX72 Brake Pads for RX-8

MX72 is the ultimate street ceramic-carbon-metallic compound developed for extreme speeds and power. MX72 is our latest development with lots of technology and effort in it to cope the demands of a extreme street compound. It is suited for use in a power brake system with or without ABS and EPS. The MX72 is a high heat resistance compound which can also be used for circuit racing, like a sports car club race day so there is no need to change pads for such an event. The initial bite and response is excellent even at very high speed like 250-300 km/h and so also the pedal feel and brake balance.

Specifications (numbers are out of 10)

Comparable data:
Initial bite – 9
Dust level – 8
Noice level – 8
Durability – 9
Control1 – 8
Pedal feel – l0

Operating Temperature 50C-700C

Please allow up to 28 days for delivery from the time of ordering.

By Essex Rotary • 11 July, 2016 • 8:20 pm • Comments Off

Clutch Slave Cylinder for RX-7 FC3s EGI

High Quality Replacement Clutch Slave Cylinder for the Mazda RX-7 FC3s This will fit the 2nd Generation RX-7 EGI Only
Many owners are choosing to replace their clutch Master and Slave Cylinder as a precautionary measure, There is nothing worse then a brake down due to a leak on either of these cylinders.

Common signs of slave cylinder failure include

  • The Pedal failing to return to the top when released
  • Clutch fluid leaking from the Cylinder
  • Inability to select gears
By Essex Rotary • • 6:59 pm • Comments Off

Clutch Master Cylinder for RX-7 FC3s

High Quality Replacement Clutch Master Cylinder for the Mazda RX-7 FC3s This will fit all 2nd Generation RX-7′s
Many owners are choosing to replace their clutch Master and Slave Cylinder as a precautionary measure, There is nothing worse then a brake down due to a leak on either of these cylinders.

By Essex Rotary • • 6:56 pm • Comments Off

SCG Wipe Out™ Scratch Eliminator

Surface scratches on your car make time spent on your detail job feel worthless. Until now. Wipe Out can really erase scratches in your clear coat, not just hide them like other products. It’s safe and works great on every colour. Not for deep scratches that go through the clear coat. Erase scratches, swirl marks and oxidation from the surface of your clear coat.

You don’t need a buffer, just your hand, Wipe Out and an applicator pad. This makes it easy to get rid of scratches as soon as they occur. Don’t just cover the surface scratches on your ride, get rid of them with Wipe Out Scratch Eliminator.

Directions:

Directions: For hand use only. Do not use buffer. Use only for surface scratches. If scratch is deep or severe, it may require wet sanding and buffing. (1) Shake well. (2) Apply small amount on surface over scratch. (3) Polish with microfiber towel, using a circular motion. Use the “two finger” method (two fingers forming a point in the towel). Add more product to surface if towel starts to dry out. DO NOT RUB DRY. (4) Buff off by hand. (5) If scratch is not completely removed, repeat process.

Surf City Detailing Tip:-

Wipe Out is designed exclusively for localized surface scratches. For large scratches that don’t go through the clear coat and swirl marks, use Beyond Clay with an orbital or circular buffer.

What Makes Surf City Garage® Enthusiast Grade® Detailing Products Different?

Wipe Out™ Scratch Eliminator

  • Doesn’t just hide surface scratches, it actually eliminates them.
  • Enthusiast Grade polish contains no fillers.
  • Specifically designed for safety. Will not damage painted surfaces.

Available in either 8oz bottle as shown or 16oz bottle, please select from below.

By Essex Rotary • 16 June, 2016 • 1:01 pm • Comments Off

Goopy Performance 3mm Apex Seals for 13b Engines

NOT ALL 13B ENGINES RUN 3MM APEX SEALS, PLEASE CHECK YOUR APPLICATION BEFORE ORDERING.

Thanks to our close association with the new UK distributor of Goopy Performance products Essex Rotary can now offer this superb proven more durable alternative to the standard Mazda Apex Seals.

GoopyLogo270w

Goopy Apex seals have become renowned for their reliability by withstanding up to 50psi in Drag Racing and still not failing and have even withstood detonation that the Mazda Apex seal could only dream of.

GoopyApexSeals420w

This makes these High Performance Apex seals not only ideal for any N/A, Turbo or Supercharged 13b but also ANY standard or tuned 13b engine running 3mm seals .

Goopy Performance recommend .0015″ of clearance between the apex seal and the rotor slot for all applications, boosted or naturally aspirated.

3 mm 13B Goopy Apex Seals are .115″ (2.921mm) thick, and you should be able to slide a .0015″ feeler gauge into the rotor apex slot with a new apex seal.

Goopy oversized 3 mm seals measure .118″ + / – .001″  (2.997mm  +/- 0.025mm). If your rotor slot measures .018″ – .020″, you may benefit from our oversized 2 mm seals which will allow you to re-gain the .0015″ suggested clearance.

Also available for the RX-8 engines these seals can be included in your Essex Rotary engine rebuild upon request at a small additional cost.

Sold at a set of 6 complete seals these will easily replace the stock apex seals found in some factory 13b engines or builds with 3mm machines slots.

Due to their increased popularity please allow up to 21 days for delivery

By Essex Rotary • • 10:59 am • Comments Off

TRUST GReddy Intercooler SPEC-LS Kit (T-24E) for RX-7 FD3S

This is a Trust GReddy Spec LS Front Mount Intercooler(FMIC) Kit which is available for the Mazda RX-7 FD3S equipped with the 13B-REW rotary engine. The Spec LS is one of the newest intercooler kits available from GReddy. It features a 20% decrease in weight from the series it is replacing, the Spec M. Trust recommends using the Spec LS on anything using a stock turbine up to boosted sports turbines. This kit was designed for the highest amount of cost performance but features high quality components to make this one of the best kits available on the Japanese market today! Included are grommets, hose clamps, piping, mounts, installation manual, and a high flowing intercooler core.

TrustGReddySpecLSIntercoolerRX7GD3s500pxSpecifications

  • Product: Front Mounted Intercooler Kit
  • Type: LS
  • Spec: M
  • Core type: 24E
  • Height: 280mm
  • Length: 600mm
  • Width: 76mm
  • Number of cores: single

Notes: 12040422 Requires Airinx Kit SKU: 18698 and Battery size 38B20R should be used.

Please note that the actual product may vary slightly from the image.
Designed to operate with the stock intake elbow, we can special order the correct version for you if your running the GReddy Compressor tube.

If not in stock this item may take up 6 weeks for delivery once ordered.

By Essex Rotary • 15 June, 2016 • 11:40 pm • Comments Off

Mazda Factory Race (MFR) Rear Stationary Gear Bearing

Genuine Mazda Factory Race Part

Use in place of stock rear bearing. 3-window type. Recommended for any engine used at 8000 rpm and above. Increases oil flow to the inside of eccentric shaft and to rotors.

If you are installing this bearing in to a Manual RX-7 FD3s of 231ps RX-8 Rear Stationary Gear we would recommend getting an indexing groove cut in to the rear face of the stationary gear in order to locate and hold this bearing correctly. The location should be in the same place as that found on Auto Rear Stationary gears and those earlier then the FD3s. Stationary gears from the Automatic FD3s and RX-8 including the 192ps manual RX-8 should have this indexing groove in them already.

These bearings are special order only and can take up to 6 weeks for delivery. They are sometimes out of stock at Mazda HQ Japan so can take longer. we would recommend ordering your competition bearings early to avoid disappointment.

THESE BEARINGS ARE SOLD INDIVIDUALLY

By Essex Rotary • • 9:46 pm • Comments Off

Mazda Factory Race (MFR) Rotor Bearing (Sold Individually)

The Mazda Factory Race (MFR) rotor bearings for all 12A & 13B engines are the best bearings available of engine operation near or above 8500 RPM. The rotor bearings are manufactured with a deep groove for additional oil storage and offer an additional .0005″ (approximate) clearance. These bearings can be used in 1973 and earlier engines by grinding off the indexing tab.

Competition bearings have 0.01 inch deeper oil groove and provide 0.0005 inch more clearance than stock bearings. Thinner overlay material improves bearing service life.

These bearings are special order only and can take up to 6 weeks for delivery. They are sometimes out of stock at Mazda HQ Japan so can take longer. we would recommend ordering your competition bearings early to avoid disappointment.

THESE BEARINGS ARE SOLD INDIVIDUALLY

By Essex Rotary • • 9:37 pm • Comments Off

Type-RA Urethane Front Bumper Lip for 2003-2008 RX-8

This is a Urethane front bumper lip designed to fit the stock front bumper only found on the Series 1 RX-8 2003-2008

Custom fit and light weight once painted this will give the front of your RX_8 a great lower look.

Type-RAUrathaneFrontLipRX8-500px

Please allow up to 28 days for delivery once ordered.

By Essex Rotary • 11 June, 2016 • 6:46 pm • Comments Off

Type-S Urethane Front Bumper Lip for 2003-2008 RX-8

This is a Urethane front bumper lip designed to fit the stock front bumper only found on the Series 1 RX-8 2003-2008

Custom fit and light weight once painted this will give the front of your RX_8 a great lower look.

Type-SUrathaneFrontLipRX8-500px

Please allow up to 28 days for delivery once ordered.

By Essex Rotary • • 6:44 pm • Comments Off

AIT R-Magic Style Rear Spoiler for RX-8

This rear spoiler is styles off the famous R-Magic rear spoiler for the RX-8

It will fit all years of the RX-8

Made from FRP (Fiberglass Reinforced Plastic) and as with all body parts it will require pre-fitting, before paint to ensure the best fit once painted.

AITR-MAgicStyleRearSpoilerRX-8-300px

Special order only, while this items normally arrives with us quite quickly if they are out of stock in the USA  it may take up to a possible 6 weeks for delivery once ordered.

By Essex Rotary • • 6:20 pm • Comments Off

KMR Rear Fender Flares for RX-8

Fiberglass Fender flares for the rear of your RX-8
Fits 2004-2011

An idea solution if your want to really go wide with wheel and tire fitment.

Adds approximately 1″ over the OEM fender. Allowing for a 1″ – 2″ or slightly more wheel tire clearance.

Wide Body rear flare kit for Mazda RX-8 should be installed by a professional

RX8RearFenderFlartes500px

Hand made in the USA. Hand layered fiberglass.
Finish is mate black gel coat

Special Order only, this item cannot be cancelled once ordered. please allow up to a possible 6 weeks for delivery one your order has been placed.

By Essex Rotary • • 5:59 pm • Comments Off

FEED 4.777 Final Drive Ring and Pinion Gear Set for FD3s & RX-8

We can not offer this 4.777:1 Ratio Ring and Pinion Gear Set made by Fujita Engineering in Japan.
A popular upgrade for RX-7 and RX-8 Track Cars as it will increase vehicle acceleration, however it is worth noting that you will loose a little top speed in each gear.

FEED4.77FinalDriveForRX7FDRX8-500px

Like the Mazda 4.777 gear set only at a more affordable price. This gear set will fit both RX-8 and RX-7 FD3s differentials.

This FEED gear set is a special order item only, and cannot be cancelled. furthermore due to the fragile nature of final drive sets we are unable to accept returns or exchanges due to risk of damage if handles improperly.

By Essex Rotary • • 4:24 pm • Comments Off

Mazda 4.777 Final Drive Ring and Pinion Gear Set for FD3s & RX-8

The Mazda 4.777 ratio ring and pinion set is suitable use on the following rotary applications: 1993-1995 Twin Turbo RX-7 and 2003-2008 RX-8,
This ring and pinion set will increase your vehicles acceleration rate, at the cost of a decrease in top speed in each gear.

MazdaRing&PinionRX8RX7FD500px
Alternate axle ratios are available for special applications. These ratios interchange exactly with the stock parts and should be adjusted to stock specifications (except as noted on the information sheet supplied with the gear set). If you replace your existing gear set with a lower ratio (higher number) gear set you will increase the vehicle’s acceleration and move through the transmission gears quicker, but you will simultaneously reduce the top speed of the vehicle for a given rpm limit. However, if you reduce your existing gear set with a higher ratio (lower number) gear set you will decrease the vehicle’s acceleration and move slower through the gears, but the top speed of the vehicle will increase for the same given rpm limit as in the previous example.

Special Order only, once you have placed your order for this part it cannot be cancelled. This part is non returnable.

By Essex Rotary • • 4:00 pm • Comments Off

Mazda 4.44 Final Drive Ring and Pinion Gear Set for RX-7 FD3s

The Mazda 4.44 ratio ring and pinion set is suitable use on the following rotary applications: 1993-1995 Twin Turbo RX-7, on some model FD’s the factory fit final drive is the 4.3:1 ratio acceleration can be increased by swapping to the slight;y shorter 4.44:1 Gear Set.
This ring and pinion set will increase your vehicles acceleration rate, trading a slight decrease in top speed in each gear.

A great modification if your not too bothered about trading a little acceleration for lower cruising RPM leading to a little better fuel economy.

MazdaRing&PinionRX8RX7FD500px
Alternate axle ratios are available for special applications. These ratios interchange exactly with the stock parts and should be adjusted to stock specifications (except as noted on the information sheet supplied with the gear set). If you replace your existing gear set with a lower ratio (higher number) gear set you will increase the vehicle’s acceleration and move through the transmission gears quicker, but you will simultaneously reduce the top speed of the vehicle for a given rpm limit. However, if you reduce your existing gear set with a higher ratio (lower number) gear set you will decrease the vehicle’s acceleration and move slower through the gears, but the top speed of the vehicle will increase for the same given rpm limit as in the previous example.

Special Order only, once you have placed your order for this part it cannot be cancelled. This part is non returnable.

By Essex Rotary • • 3:52 pm • Comments Off

Mazda 4.3 FInal Drive Ring and Pinion Gear Set for FD3s & RX-8

The Mazda 4.30 ratio ring and pinion set is suitable use on the following rotary applications: 1993-1995 Twin Turbo RX-7 and RX-8.
This ring and pinion set will decrease your vehicles acceleration rate but increase its top speed.

A great modification if your not too bothered about trading a little acceleration for lower cruising RPM leading to a little better fuel economy.

MazdaRing&PinionRX8RX7FD500px
Alternate axle ratios are available for special applications. These ratios interchange exactly with the stock parts and should be adjusted to stock specifications (except as noted on the information sheet supplied with the gear set). If you replace your existing gear set with a lower ratio (higher number) gear set you will increase the vehicle’s acceleration and move through the transmission gears quicker, but you will simultaneously reduce the top speed of the vehicle for a given rpm limit. However, if you reduce your existing gear set with a higher ratio (lower number) gear set you will decrease the vehicle’s acceleration and move slower through the gears, but the top speed of the vehicle will increase for the same given rpm limit as in the previous example.

Special Order only, once you have placed your order for this part it cannot be cancelled. This part is non returnable.

By Essex Rotary • • 3:45 pm • Comments Off

AIT Abflug Style Rear Bumper For RX-8

Made by AIT Racing in the USA this is a rear bumper in the Abflug Style.
All AIT items are made of FRP, Fiber reinforced plastic. This is one of the best fiberglass qualities in the tuning industry. The AIT bumpers will come with mesh included, and special green coating for flexibility.
You can choose from many popular styles.

While fitment of these bodykits is very good. As with all fiberglass parts we recommend test fitting for fit and sanding if requires for a perfect fit prior to getting them painted.

AITAbflugRX-8RearBumber500px

By Essex Rotary • 9 June, 2016 • 1:12 am • Comments Off

AIT Abflug Style Side Skirts For RX-8

Made by AIT Racing in the USA this is a side skirts in the Abflug Style.
All AIT items are made of FRP, Fiber reinforced plastic. This is one of the best fiberglass qualities in the tuning industry. The AIT bumpers will come with mesh included, and special green coating for flexibility.
You can choose from many popular styles.

While fitment of these bodykits is very good. As with all fiberglass parts we recommend test fitting for fit and sanding if requires for a perfect fit prior to getting them painted.

AITAbflugRX-8SideSkirts500px

By Essex Rotary • • 1:08 am • Comments Off

AIT Abflug Style Front Bumper for RX-8

Made by AIT Racing in the USA this is a front bumper in the Abflug Style.
All AIT items are made of FRP, Fiber reinforced plastic. This is one of the best fiberglass qualities in the tuning industry. The AIT bumpers will come with mesh included, and special green coating for flexibility.
You can choose from many popular styles.

While fitment of these bodykits is very good. As with all fiberglass parts we recommend test fitting for fit and sanding if requires for a perfect fit prior to getting them painted.
AITAbflugRX-8FrontBumber500px

By Essex Rotary • • 12:59 am • Comments Off

Mazdaspeed Style Wide Body Rear Fenders for RX-8

Thee are Mazdaspeed style over fenders for the rear of your RX-8 made by AIT Racing. these are the same style that have been run on the Mazdatrix RX-8 Drift Car driven by Kyle Mohan.
Each side will increase the width of your RX-8 by approximately 60mm.

Package included:

  •     2 Fender Flares (Left & Right)
  •     60mm Wider Than Factory, 120mm Total
  •     Material: Fiberglass Reinforced Plastic
  •     Flexible and Durable

AITMazdaspeedRX8RearMazdatrixOverfenders500pxAITMazdaspeedRX8RearMazdatrixOverfendersAlt2-500px

By Essex Rotary • • 12:45 am • Comments Off

Mazdaspeed Style Wide Body Front Fenders for RX-8

Thee are Mazdaspeed style over fenders for the front of your RX-8 made by AIT Racing. these are the same style that have been run on the Mazdatrix RX-8 Drift Car driven by Kyle Mohan.

Each side will increase the width of your RX-8 by approximately 60mm.

Package included:

  •     2 Fender Flares (Left & Right)
  •     60mm Wider Than Factory, 120mm Total
  •     Material: Fiberglass Reinforced Plastic
  •     Flexible and Durable

AITMazdaspeedRX8FrontMazdatrixOverfendersAlt2-500px

AITMazdaspeedRX8FrontMazdatrixOverfendersAlt500px

By Essex Rotary • • 12:28 am • Comments Off

AEM Replacement Air Filter for RX-8 Induction Kit

Replacement Air Filter for your RX-8 AEM Induction Kit.

  • Designed to increase horsepower and throttle response
  • AEM Air Filters are cleanable and reusable for the life of your vehicle
  • Captures up to 99% of harmful contaminants
  • Outstanding performance even in dusty racing conditions
  • Manufactured in the USA
  • Does not require oil
  • Will NOT void vehicle warranty
  • Guaranteed for the life of your vehicle

AEM Dryflow Air Filters are washable synthetic air filters designed for an optimum combination of air flow, filtration, and performance. AEM Dryflow filters use an innovative high performance oil-free filtration material that allows easy cleaning, durable service, and excellent filtration. Replacement air filters for street vehicles come with a lifetime limited warranty. Other air filters come with a one year limited warranty.

By Essex Rotary • 7 June, 2016 • 11:26 am • Comments Off

AEM Replacement Filter Wrap (SOCK)

Replacement Pre-filter “Sock” for your AEM Intake Filter

  • Made of a durable micro-screen material
  • Protects your Dryflow air filter from water and mud
  • Also blocks small dirt particles
  • Adds very little air restriction

AEM Dryflow Pre-Filters are manufactured from a durable micro-screen material and pre-treated with a proprietary hydrophobic process designed to prevent splashes of water or mud from saturating your Dryflow air filter. AEM Dryflow Pre-filters also stop small dirt particles; yet add little restriction.

By Essex Rotary • • 11:21 am • Comments Off

Black Halo Racing Fuel Pump Ring Tool for RX-8

Black Halo Racing offers this fuel pump ring removal tool for all model years of the Mazda RX-8. Made from CNC’d billet aluminum and anodized black, this tool features a 1/2″ receiver to help the user easily apply the torque needed to remove the fuel pump ring from the fuel tank.

By Essex Rotary • 6 June, 2016 • 8:08 pm • Comments Off

AIT MS Style FRP Fenders for 2004-2008 RX-8

These FRP fenders are styles from those that where offered by Mazdaspeed.
Designed to fit the Series 1 RX-8, Please note these will not fit the later R3 RX-8

Fitment of these parts is good however as with all fiberglass/FRP parts we strongly recommend you test fit and trim for perfect fitment prior to painting.

AITRX8MazdaspeedStyleFrontFendersAlt500px

AITRX8MazdaspeedStyleFrontFenders500px

THIS PART IS MADE FROM FRP

Please note that this is a special order only item and has an estimated lead time of 2-3 months for manufacture and delivery. as this is a special order item, once your order has been placed it cannot be cancelled, by placing your order for this part you agree to these terms.

By Essex Rotary • 5 June, 2016 • 7:47 pm • Comments Off

AIT Wangan Style FRP Boot Spoiler for RX-8

This is an FRP version of the Wangan Style trunk spoiler for the RX-8 made by AIT
This spoiler will fit all years of the RX-8 including the R3.

AITRX8WanganSpoiler500px
THIS PART IS MADE FROM FRP

Please note that this is a special order only item and has an estimated lead time of 2-3 months for manufacture and delivery. as this is a special order item, once your order has been placed it cannot be cancelled, by placing your order for this part you agree to these terms.

By Essex Rotary • • 7:20 pm • Comments Off
ajax
ajax