Tier 4 Engine Rebuild Kit for RX-8

Tier 4 Engine Rebuild Kit for RX-8

These engine rebuild kits have been assembles for the convenience of the regular home rebuilder.

As with our own customer rebuilds here at Essex Rotary, we never scrimp on quality but choose to only supply 100% genuine Mazda parts or carefully selected upgrade options in our kits so you can have piece of mind that what your putting back in your engine is the best available.

Non Mazda upgrade parts will always be clearly marked and offered as an alternative on grounds of quality and reliability NOT because they may just be cheaper then genuine parts (if if they are available).

As with any home rebuild we would advise that you first assess what your engine requires as with each tier of kit we offer your will have a much more inclusive set of parts.

The Tier 4 kit is the most complete rebuild kit we currently offer, including many smaller items that are not usually worn but some people choose to change as a precautionary measure.

Components marked in green denote the extra parts included in the Tier 4 kit when compared to the Tier 3 kit.
Tier 4 Kit includes;

  • 6 x Genuine Mazda Apex Seals
  • 6 x Long Apex Seal Springs
  • 6 x Short Apex Seal Springs
  • 12 x Side Seals
  • 12 x Side Seal Springs
  • 12 x Corner Seals
  • 12 x Corner Seal Plugs
  • 12 x Corner Seal Springs
  • 4 x Inner Oil Control Ring Seals
  • 4 x Outer Oil Control Ring Seals
  • 4 x Inner Oil Control Ring Cases (metal part)
  • 4 x Outer Oil Control Ring Cases (metal part)
  • 4 x Inner Oil Control Ring Springs (2 x front facing and 2 x rear faring)
  • 4 x Outer Oil Control Ring Springs (2 x front facing and 2 x rear facing)
  • 4 x Oil Scraper (blow by) Rings
  • 4 x Oil Scraper Ring Springs
  • 1 x Front Main Oil Seal
  • 1 x Rear Main Oil Seal*
  • 2 x Torrington Bearings (also known as thrust bearings)
  • 1 x Thrust Plate
  • 1 x Thrust Plate Washer
  • 1 x Oil Pump Chain
  • 2 x Stationary Gear Bearings
  • 2 x Rotor Bearings
  • 1 x Engine Water Seal Kit (please see below for details of what is included in our water seal kit)
  • 1 x Engine Gasket Kit (please see below for details of what is included in the engine gasket kit)
  • 1 x Silicon Gasket Sealant
  • 1 x Hylomar Gasket Sealant

Genuine Mazda Water Seal Kit includes the following components;

  • 2 x Inner Water Jacket Seals
  • 2 x Outer Water Jacket Seals
  • 4 x Dowel “O” Ring
  • 1 x Front E-Shaft Bolt “O” Ring
  • 1 x Rear Stationary Gear “O” Ring
  • 18 x Through Bolt Seals (Dowty Washers)

The Genuine Mazda engine gasket kit includes;

  • 1 x Water Pump Gasket
  • 1 x Thermostat Gasket
  • 1 x OMP Seal
  • 1 x Front Cover Gasket
  • 1 x Lower Intake Manifold Gasket**
  • 1 x Upper to Lower Intake Manifold Gasket Set**
  • 1 x Oil Filler Gasket
  • 1 x Injector Seat Seal Set**
  • 1 x Oil Injector Crush Washer Set
  • 1 x OMP Crush Washer Set
  • 1 x Oil Hose Banjo Crush Washer Set
  • 1 x Exhaust Manifold Gasket
  • 1 x Throttle Body Gasket
  • 1 x Oil Filter Pedestal Gasket

**Due to the Differences between the 192ps, 231ps and R3 engines please select the correct kit from the drop down menu above this menu also includes delivery options for your particular package. (found next to the price)

* We supply the better FD3s rear main oil seal in our kits.

While kits are usually delivered quickly in at times when certain items are out of stock please allow up to 28 days for delivery of your selected rebuild kit. If you require your kit urgently please contact us in advance before ordering.

By Essex Rotary • 31 January, 2013 • 6:31 pm
 
ajax
ajax