REMEMBER TO CHOOSE THE CORRECT SHIPPING OPTION BEFORE ADDING ITEMS TO THE CART!

Black Halo Racing Ignition Upgrade Kit for RX-8

Black Halo Racing Ignition Upgrade Kit for RX-8

GENUINE BHR PARTS ACCEPT NO SUBSTITUTES!
The kit that spawned a thousand "D585 Coil Kit" COPIES....!

3 C ...

£ 525.00
add to cart
show details
GENUINE BHR PARTS ACCEPT NO SUBSTITUTES!
The kit that spawned a thousand "D585 Coil Kit" COPIES....!

3 Colors Available:
  • Red with Red HT Leads
  • Blue with Blue HT Leads
  • Silver with Black HT Leads
BlackHaloRacingIgnitionKitRX8AllColors300px It is widely known that the ignition coils on the Mazda RX-8 are weak and suffer from reliability issues, even on unmodified engines, as early as 30,000 miles and weak ignition coils eventually result in failure of the exhaust catalyst and/or long-term engine damage. With forced induction, nitrous oxide use, or any kind of track racing you need to have an ignition system that is more reliable and with higher voltage/current output than the OEM system.

The Black Halo Racing Ignition system is designed for purposes of improving the reliability and drivability of the RX8 as well as a modest but noticeable increase in power. This ignition upgrade is NOT designed to resolve problems with your engine/car as a result of mechanical failure, so please be sure your engine is mechanically in proper operating condition before purchasing..

This ignition system is likely the most popular product ever offered for the Mazda RX-8 and it's popularity continues to rise...... probably because this is the ONLY ignition system for the Mazda RX-8 which retains over 80% of it's value in the resale market! Do not be misled by imitation/"copycat" systems other retailers may try to sell you as many of them do not include everything needed for a proper installation.

Typical benefits reported by those whom have purchased this kit are quicker start-ups, better throttle response, more midrange torque, smoother engine sound/operation above 7,000 RPMs, and no more misfires. All this applies to power-adder (nitrous or F/I) applications, as well, and all models of the Mazda RX-8.The Black Halo Racing Ignition System addresses these concerns in a very simple manner. The coil conversion wiring harness allows a true "plug-and-play" installation that doesn't require you to cut, splice, or otherwise alter any wiring in your RX8. The ignition coils used emit more current and voltage than the RX-8/OEM ignition coils and provide much longer life over the stock and most aftermarket systems. They are used in many racing applications, rival any coil in the aftermarket, and this system renders any additional/external ignition hardware unnecessary. The kit mounts in the exact same location as the OEM coils and fits all models/years of the RX-8. Do not wait until problems arise before making improvements to your ignition system.

The pre-assembled kit contains a baseplate, coil brackets, ignition coils, a plug-and-play conversion harness, and custom-built MSD or Moroso spark plug wires. It also includes a 3-year warranty on all parts, materials, and workmanship. 3-year warranty on all parts, materials, and workmanship.
Black Halo Racing Ignition Upgrade Kit for RX-8 inc Spark Plugs

Black Halo Racing Ignition Upgrade Kit for RX-8 inc Spark Plugs

GENUINE BHR PARTS ACCEPT NO SUBSTITUTES! The kit that spawned a thousand "D585 Coil Kit" COPIES....! £ 625.00

add to cart
show details
GENUINE BHR PARTS ACCEPT NO SUBSTITUTES! The kit that spawned a thousand "D585 Coil Kit" COPIES....! NGKIridium This Package Includes a set of Genuine NGK Iridium spark Plugs (as recommended by BHR) at a large discount SAVE £25.00 Compared to buying BHR Coils and Plugs Separately 3 Colors Available:
  • Red with Red HT Leads
  • Blue with Blue HT Leads
  • Silver with Black Ht Leads
BlackHaloRacingIgnitionKitRX8AllColors300px It is widely known that the ignition coils on the Mazda RX-8 are weak and suffer from reliability issues, even on unmodified engines, as early as 30,000 miles and weak ignition coils eventually result in failure of the exhaust catalyst and/or long-term engine damage. With forced induction, nitrous oxide use, or any kind of track racing you need to have an ignition system that is more reliable and with higher voltage/current output than the OEM system. The Black Halo Racing Ignition system is designed for purposes of improving the reliability and drivability of the RX8 as well as a modest but noticeable increase in power. This ignition upgrade is NOT designed to resolve problems with your engine/car as a result of mechanical failure, so please be sure your engine is mechanically in proper operating condition before purchasing.. This ignition system is likely the most popular product ever offered for the Mazda RX-8 and it's popularity continues to rise...... probably because this is the ONLY ignition system for the Mazda RX-8 which retains over 80% of it's value in the resale market! Do not be misled by imitation/"copycat" systems other retailers may try to sell you as many of them do not include everything needed for a proper installation. Typical benefits reported by those whom have purchased this kit are quicker start-ups, better throttle response, more midrange torque, smoother engine sound/operation above 7,000 RPMs, and no more misfires. All this applies to power-adder (nitrous or F/I) applications, as well, and all models of the Mazda RX-8.The Black Halo Racing Ignition System addresses these concerns in a very simple manner. The coil conversion wiring harness allows a true "plug-and-play" installation that doesn't require you to cut, splice, or otherwise alter any wiring in your RX8. The ignition coils used emit more current and voltage than the RX-8/OEM ignition coils and provide much longer life over the stock and most aftermarket systems. They are used in many racing applications, rival any coil in the aftermarket, and this system renders any additional/external ignition hardware unnecessary. The kit mounts in the exact same location as the OEM coils and fits all models/years of the RX-8. Do not wait until problems arise before making improvements to your ignition system. The pre-assembled kit contains a baseplate, coil brackets, ignition coils, a plug-and-play conversion harness, and custom-built MSD or Moroso spark plug wires. It also includes a 3-year warranty on all parts, materials, and workmanship. 3-year warranty on all parts, materials, and workmanship.
Black Halo Racing Resonated Midpipe (Decat) for RX-8

Black Halo Racing Resonated Midpipe (Decat) for RX-8

Exclusive to Essex rotary in the UK

The Black Halo Racing Midpipe is a ...

£ 574.00
add to cart
show details
Exclusive to Essex rotary in the UK

The Black Halo Racing Midpipe is a 3-inch pipe design with a single resonator (the design of which is exclusive to Black Halo Racing) that proves two resonators are not necessary to quiet down the Renesis and provide a great sound. This pipe does both with unmatched build quality and durability. By utilizing a resonator which has no internal packing it will retain its tone practically forever. Our midpipe also provides OEM fitment and will bolt up to the stock exhaust manifold as well as any cat-back exhaust system that uses stock mounting points.

All necessary hardware and gaskets are included.

Please allow up to 28 working days for delivery of this part.
Black Halo Racing Resonated Midpipe with High Flow Cat for Rx-8

Black Halo Racing Resonated Midpipe with High Flow Cat for Rx-8

Exclusive to Essex rotary in the UK

The Black Halo Racing Midpipe with ...

£ 689.99
add to cart
show details
Exclusive to Essex rotary in the UK

The Black Halo Racing Midpipe with High Flow Cat is a 3-inch pipe design with a single resonator (the design of which is exclusive to Black Halo Racing) that proves two resonators are not necessary to quiet down the Renesis and provide a great sound. This pipe does both with unmatched build quality and durability. By utilizing a resonator which has no internal packing it will retain its tone practically forever. Our midpipe also provides OEM fitment and will bolt up to the stock exhaust manifold as well as any cat-back exhaust system that uses stock mounting points.

A 3" ceramic catalyst is in welded in to this version of the resonated midpipe for those concerned with exhaust emissions. This catalyst is not suitable for track use nor does it come with a warranty. If your factory catalyst has failed please be sure that your ignition system and your engine are in proper operating condition before ordering the optional catalyst installed on your midpipe.

All necessary hardware and gaskets are included.

Please allow up to 28 working days for delivery of this part.
Black Halo Racing Throttle Body Spacer for RX-8

Black Halo Racing Throttle Body Spacer for RX-8

The Black Halo Racing Throttle Body Spacer provides an easy, and reversible, way to install nitrous oxide or alcohol injection systems on ...

£ 114.99
add to cart
show details

The Black Halo Racing Throttle Body Spacer provides an easy, and reversible, way to install nitrous oxide or alcohol injection systems on your Mazda RX-8 without having to drill holes in your intake system. With 1/8" NPT, 1/8" SPT, and 1/16" NPT orifices nearly any injection nozzle type can be accomodated. CNC-machined and anodized in black, with the BHR logo on the top face, this product provides a subtle and classy way to install your injection system. All necessary hardware for proper installation is included.

The BHR Throttle Body Spacer is not intended to alter the airflow characteristics of your intake system and it does not provide any claimed power gains.

Currently In Stock

Black Halo Racing Intake Undertray

Black Halo Racing Intake Undertray

When installing aftermarket intake systems (such as the AEM and MazdaSpeed versions), the unattractive factory intake undertray is left expo ...

£ 174.99
add to cart
show details
When installing aftermarket intake systems (such as the AEM and MazdaSpeed versions), the unattractive factory intake undertray is left exposed and visible and this product is intended as a direct bolt-in replacement for the OEM unit. It looks much better than the plastic factory unit and is available in anodized (black, Red and blue) finishes.

This tray is also a great option for turbocharged cars that have an open air filter in the stock location, this tray will help to minimize heat soak in to the intake from hot air exiting the radiator.

Please allow up to 4 weeks for delivery if out of stock.
Black Halo Racing Long-Tube Header for RX-8

Black Halo Racing Long-Tube Header for RX-8

Exclusive to Essex Rotary in the UK

Essex Rotary are very excited to br ...

£ 1926.00
add to cart
show details
Exclusive to Essex Rotary in the UK

Essex Rotary are very excited to bring to the UK the most anticipated exhaust header of all time for the RX-8, The Black Halo Racing Long-Tube Manifold.

This header is intended as a "race-only" application as it has no AIR pump fitting, will not fit an exhaust catalyst, will trigger the  410 and 420 CELs, and is not CARB certified.

After years of development and testing for performance, fitment, and durability, Black Halo Racing is excited to announce the Black Halo Racing Long-Tube Header that many have waited for is finally available and production has begun.  Over a period of two-plus years this header was tested on a few different RX-8s with similar performance in all cases.

The attached dyno sheet is from a 6-port/6-speed 2008 RX-8 with about 25K miles on it and using a BHR Ignition System as it's only modification (installed well before the dyno test was performed), including still using the factory cat-back exhaust system. Typical rear-wheel horsepower gains were 20-25 rear-wheel horsepower, with additional engine torque being demonstrated as low as 2,000 RPMs, but actual total gains in power are dependent on the age/condition of each engine and the presence of other modifications.

Utilizing three 1-7/8" primary pipes and a 3" merge collector, this header balances easy installation, interference-free fitment, and the most free exhaust flow possible.  In addition, the CNC-milled engine flange has very smooth transitions from the rectangle exhaust ports to the round primary tubes.

The Black Halo Racing Long-Tube Header includes a 3" midpipe outlets and all the gaskets and hardware needed for a comprehensive swap from your factory manifold A discounted option is available for those who already have a 3" midpipe.

Mounts for the factory front and rear oxygen sensors are also installed and positioned in their OEM locations.

Due to the value of this part these headers are special order only and may take 4-6 weeks to be manufactured and shipped to us from BHR in the USA. Please remember you may need to allow up to this amount of time from order placement to arrival.

BlackHaloRacingLongTubeHeader1000px
Black Halo Racing Flywheel

Black Halo Racing Flywheel

Exclusive to Essex Rotary in the UK.
Offering the lightest streetable flywhee ...

£ 455.00
add to cart
show details
Exclusive to Essex Rotary in the UK.
Offering the lightest streetable flywheel on the market worldwide, BHR lead the way in product innovation.

BlackHaloRacingFlywheel420px When it comes to your powertrain the flywheel can be a limiting factor due to it's mass.  While at slightly less than 17 lbs. the RX-8 has a lighter flywheel than most production vehicles, Black Halo Racing has gone further to develop a much lighter alternative.  Our 9 lb. aluminum flywheel removes rotating mass in critical areas allowing more power to be translated to the wheels (which is where you want it, isn't it!).  Our flywheel also has a replaceable friction face allowing you to reuse/repair the flywheel (if necessary) instead of having to buy a replacement should the need arise.

Necessary counterweight is sold separately.
Optional discount if purchased with a counterweight, take a look at our special offers section for model options, Package price would be £525.00 collected or £545 Delivered

Currently In Stock
Black Halo Racing Fuel Pump Ring Tool for RX-8

Black Halo Racing Fuel Pump Ring Tool for RX-8

Black Halo Racing offers this fuel pump ring removal tool for all model years of the Mazda RX-8. Made from CNC'd billet aluminum and anodiz ...

£ 57.50
add to cart
show details
Black Halo Racing offers this fuel pump ring removal tool for all model years of the Mazda RX-8. Made from CNC'd billet aluminum and anodized black, this tool features a 1/2" receiver to help the user easily apply the torque needed to remove the fuel pump ring from the fuel tank.

Shopping Cart

 

Shop categories

ajax
ajax