REMEMBER TO CHOOSE THE CORRECT SHIPPING OPTION BEFORE ADDING ITEMS TO THE CART!

Koyo Racing Radiator 36mm Core for Manual 03-08 RX-8

Koyo Racing Radiator 36mm Core for Manual 03-08 RX-8

A slightly thinner core with a saving to boot, plus a New Improved Price
With cooling being so important to rotaries why not look ...

£ 280.00
add to cart
show details

A slightly thinner core with a saving to boot, plus a New Improved Price
With cooling being so important to rotaries why not look at upgrading your cooling system. a Koyorad can aid in dropping your coolant temps significantly. Their high quality aluminium construction and OEM fitment means your not paying to have it modified (like many cheaper "racing" radiators)

The KOYO R-Series Core radiator provides improved cooling coverage for both street and track applications combined with show quality looks and finish

Construction is held to tight quality control standards that are illustrated in the outstanding Heliarc soldering, pristine tube and fin alignment, and mirror-like surface finish. The tubes, fins, headers, and brackets are brazed in a state-of-the-art Nocolok furnace, which bonds these components into a virtually indestructible radiator unit.

KoyoRadLogo

All fan mounts are situated to OE specifications, and using the OEM mounting locations facilitates fitment into the RX-8.
Why not include a set of SFS Performence Radiator hoses with your new cooling upgrade

Suitable for 192 and 231 models with Manual transmission only
Please allow 7-14 days for delivery depending on stock levels.

Koyo Racing Radiator 53mm Core for Manual RX-8

Koyo Racing Radiator 53mm Core for Manual RX-8

The Largest Core Available for the RX-8, and New Improved Price
With cooling being so important to rotaries why not look at upgrad ...

£ 325.00
add to cart
show details

The Largest Core Available for the RX-8, and New Improved Price
With cooling being so important to rotaries why not look at upgrading your cooling system. a Koyorad can aid in dropping your coolant temps significantly. Their high quality aluminium construction and OEM fitment means your not paying to have it modified (like many cheaper "racing" radiators)

The KOYO V-Series radiator provides improved cooling coverage for both street and track applications combined with show quality looks and finish

Construction is held to tight quality control standards that are illustrated in the outstanding Heliarc soldering, pristine tube and fin alignment, and mirror-like surface finish. The tubes, fins, headers, and brackets are brazed in a state-of-the-art Nocolok furnace, which bonds these components into a virtually indestructible radiator unit.

KoyoRadLogo

All fan mounts are situated to OE specifications, and using the OEM mounting locations facilitates fitment into the RX-8.
Why not include a set of SFS Performence Radiator hoses with your new cooling upgrade

Suitable for 192 and 231 models with Manual transmission only, automatic Transmission Versions are available. upon request.
Please allow 7-14 days for delivery depending on stock levels.

SFS Radiator Hose Kit for RX-8

SFS Radiator Hose Kit for RX-8

This is a two piece hose kit from the famous hose maker SFS Performance This kit is designed to replace your Radiator top and bottom hos ...

£ 124.99
add to cart
show details

This is a two piece hose kit from the famous hose maker SFS Performance This kit is designed to replace your Radiator top and bottom hose and comes in a range of colors to suit your build.

SFS Performance direct replacement hose kits don’t just add race-bred style to an engine bay; they also provide peace of mind. Their high performance construction ensures total component reliability, even if you have modified your engine. Our hose kits can take far higher temperatures and higher pressures than the original parts, and won’t deteriorate, no matter what you put them through.

Available in
  • Blue
  • Red
  • Black
  • Other Colors availabe on request
RX8SFSHosesRad

A great addition if your thinking about replacing your Radiator with our KoyoRad Upgrade

Please allow 7-21 days for delivery defendant on stock availability
Royal Purple ICE Coolant System Additive

Royal Purple ICE Coolant System Additive

Purple Ice® is a high performance radiator conditioner. Its advanced 2-in-1 corrosion inhibitor and wetting agent provides year-round defe ...

£ 23.99
add to cart
show details
Purple Ice® is a high performance radiator conditioner. Its advanced 2-in-1 corrosion inhibitor and wetting agent provides year-round defense against corrosion. Purple Ice also reduces the surface tension of the radiator coolant to help reduce engine temperatures. RoyalPurpleLogomd

Reduces Coolant Temperatures

Extensive testing confirms Purple Ice reduces coolant temperatures better than comparable products while providing extra corrosion protection.

Performance Advantages Include;

  • Improved Performance - Reduces surface tension of a coolant allowing more heat to transfer outside the radiator resulting in more horsepower
  • Reduced Heat - Reduces hot spots in the engine and cylinder heads, reducing the possibility of engine failure
  • Maximum protection - Helps prevent overheating, keeps the system clean and extends the life of the water pump
Trust GReddy Baffled Oil Pan (Sump) for RX-8 2004-2008

Trust GReddy Baffled Oil Pan (Sump) for RX-8 2004-2008

Functional as a secondary oil cooler, GReddy high-capacity Oil Pans maintain more constant oil temperatures via increased volume of oil a ...

£ 374.99
add to cart
show details

Functional as a secondary oil cooler, GReddy high-capacity Oil Pans maintain more constant oil temperatures via increased volume of oil and the improved cooling efficiency of the thick-walled cast aluminium construction.

They also include specially designed interiors to keep the oil at the oil pump pick-up for engine reliability, and additional drain ports for the installation of turbo oil drains etc.

This oil pan offers an increased oil capacity over the stock oil pan, will not corrode and leak like the OEM pan, and with its superior cooling efficiency of the finned (heat sync style) cast aluminium construction this oil pan is a superb upgrade for both forced induction and N/A series 1 RENESIS engines.

Please allow up to 28 days for delivery at times when this item is out of stock.
Essex Rotary Lightweight Under Drive 2 Pulley Kit for RX-8

Essex Rotary Lightweight Under Drive 2 Pulley Kit for RX-8

2 piece pulley kit including replacement belt

Essex Rotary brings you our new lightweight under drive pulley Kit replaces both th ...

£ 86.50
add to cart
show details

2 piece pulley kit including replacement belt

Essex Rotary brings you our new lightweight under drive pulley Kit replaces both the Alternator and Water Pump Pulleys reducing the potential for Water pump cavitation and over working the Alternator at the high RPM ranges the Rotary Engine can operate at.

These Lightweight Pulleys are CNC machined from super light but extremely strong 6061-T6 Aluminium Alloy. reducing rotational weight from the crank and associated ancillaries will theoretically frees up horsepower normally used to turn the heavier pulleys and ancillaries (though Essex Rotary make no claim to proven HP gains when using under drive kits)

Cavitation

Cavitation is a process where by your water pump impeller acts like a "whisk" at high RPM beating air bubbles in to the coolant mixture, this process dramatically reduces coolant efficiency as the increasing cavitation effect reduces coolant flow around the engine.

Each kit comes complete with a replacement drive belt made by Gates to suit your new setup as the OEM size will no longer fit.

This 2 piece kit has the same size water pump pulley as our 3 piece kit however the alternator pulley is slightly larger again.

This item is normally in stock however please allow up to 21 days for delivery of your kit if we are out of stock. FREE DELIVERY CURRENTLY OFFERED ON THIS PRODUCT
Essex Rotary Lightweight Under Drive 3 Pulley Kit (Ver.2) for RX-8

Essex Rotary Lightweight Under Drive 3 Pulley Kit (Ver.2) for RX-8

3 Pulley kit including replacement drive belts

Essex Rotary brings you our new lightweight under drive pulley Kit replaces all th ...

£ 119.99
add to cart
show details

3 Pulley kit including replacement drive belts

Essex Rotary brings you our new lightweight under drive pulley Kit replaces all three pulleys, Main Crank Pulley plus Alternator and Water Pump Pulleys reducing the potential for Water Pump cavitation and over working of the Alternator at the high RPM ranges the Rotary Engine can operate at.

EssexRotary3pcPulleyKitColor450px

These Lightweight Pulleys are CNC machined from super light but extremely strong 6061-T6 Aluminium Alloy. reducing rotational weight from the crank and associated ancillaries will theoretically frees up horsepower normally used to turn the heavier pulleys and ancillaries (though Essex Rotary make no claim to proven HP gains when using under drive kits)

Cavitation

Cavitation is a process where by your water pump impeller acts like a "whisk" at high RPM beating air bubbles in to the coolant mixture, this process dramatically reduces coolant efficiency as the increasing cavitation effect reduces coolant flow around the engine.

Each kit comes with 2 new alternator/water pump and air conditioning drive belts made by Gates to suit your new setup as the OEM size belts will no longer fit.

This 3 piece kit has the same size water pump pulley as our 2 piece kit however the alternator pulley is slightly smaller in overall diameter.

This item is normally in stock however please allow up to 21 days for delivery of your kit if we are out of stock. FREE DELIVERY CURRENTLY OFFERED ON THIS PRODUCT
Mishimoto Performance Radiator 39mm Core for RX-8 04-08

Mishimoto Performance Radiator 39mm Core for RX-8 04-08

The Mishimoto performance aluminium radiator for the Mazda RX-8 is the ideal upgrade to the stock RX8 radiator. Designed and specifically ...

£ 255.00
add to cart
show details

The Mishimoto performance aluminium radiator for the Mazda RX-8 is the ideal upgrade to the stock RX8 radiator. Designed and specifically engineered to maximize cooling efficiency by up to 30%, boost engine functions and protect your car from overheating. Whether you use your Mazda RX-8 for daily driving or take it to the track, many people overlook the importance of installing an upgraded radiator in their engine. A stock radiator can not handle the heat that comes along with having a great deal of horsepower. The Mishimoto Mazda RX-8 radiator features a lightweight dual core, 100% brazed aluminum, and polished end tanks. Every Mishimoto Performance Radiator is a direct OEM fit, making installation effortless, no cutting or modification is required.

MishimotoPlaque270pxMishimotoTankLogo270px

    This item is for Manual Transmission vehicles. For automatic applications, please purchase optional Mishimoto transmission cooler.

    MishimotoRadiatorRX-8270px

    All Mishimnoto products are backed up by their lifetime warranty.

    Delivery Times are usually very quick but please allow up to 14 days for delivery

Mishimoto Fan Shroud Kit for 04-08 RX-8

Mishimoto Fan Shroud Kit for 04-08 RX-8

Mishimoto Mazda RX-8 aluminium fan shroud kits will considerably improve engine cooling functions and the overall performance of your veh ...

£ 189.00
add to cart
show details

Mishimoto Mazda RX-8 aluminium fan shroud kits will considerably improve engine cooling functions and the overall performance of your vehicle. All Mishimoto fan shrouds are significantly lighter than standard fan shrouds and are a direct OEM fit. A Mishimoto fan shroud will effectively drive heat out of the engine bay and deliver a significant amount of cool air to your RX-8 radiator. The fan shroud also serves another very important purpose: securing the fan blades. The fan shroud will keep the fan blades in place, which otherwise could potentially damage other essential components in your engine.

    MishimotoFanShroudRX8270px

All Mishimoto aluminium fan shrouds include an adhesive protective strip. This adhesive-backed foam strip seals any remaining gap between the fan shroud and radiator so that the fans are only moving air that has passed through the radiator core as opposed to pulling in air from the engine bay, resulting in improved cooling efficiency.

Kit Includes;

  • Mishimoto Aluminium Shroud
  • Mounting Hardware
  • 2 x Mishimoto 12" fans

Compatible with both OEM and Mishimoto Radiators this kit is capable of moving an amazing 2300CFM of air over your radiator.

Delivery Is usually very quick however please allow up to 14 days for delivery of this part.
Mishimoto Racing Thermostat for RX-8 04-10

Mishimoto Racing Thermostat for RX-8 04-10

the Mazda RX-8 is well known for its high-revving rotary engine and well-balanced chassis. An overheating engine can result in a ruined t ...

£ 50.00
add to cart
show details

the Mazda RX-8 is well known for its high-revving rotary engine and well-balanced chassis. An overheating engine can result in a ruined track day or a damaged engine. A Mishimoto racing thermostat is the ideal upgrade for improved cooling reliability and efficiency. Mishimoto racing thermostats promote greater cooling efficiency by significantly decreasing high engine temperatures. Once the engine is fully warmed up, the Mishimoto low-temperature racing thermostat will open at a lower temperature (76°C) compared to standard thermostats (82°C). This allows coolant to flow through the engine sooner, thus reducing and maintaining cooler engine temperatures. As with all our products, this thermostat includes the Mishimoto lifetime warranty.

MishimotoThermostatRX8270px

Ideal for all you track day nutters but equally at home on the street.

This is one of our optional upgrades during customer engine rebuilds.

    Mishimoto-warranty-seal
Coolant Tank for RX-8

Coolant Tank for RX-8

This is a replacement coolant expansion tank for your Mazda RX-8 these are a common fault in all RX-8 models as the level sensor is prone to ...

£ 165.00
add to cart
show details
This is a replacement coolant expansion tank for your Mazda RX-8 these are a common fault in all RX-8 models as the level sensor is prone to failure on the original part.

Please note that when changing the tank there is s small pipe that goes on to the top of the radiator, care should be taken when removing this pipe (we recommend you remove it from the expansion tank end and NOT the radiator end) not to crack the plastic top tank of the OEM radiator around the nipple. 
Black Halo Racing Intake Undertray

Black Halo Racing Intake Undertray

When installing aftermarket intake systems (such as the AEM and MazdaSpeed versions), the unattractive factory intake undertray is left expo ...

£ 174.99
add to cart
show details
When installing aftermarket intake systems (such as the AEM and MazdaSpeed versions), the unattractive factory intake undertray is left exposed and visible and this product is intended as a direct bolt-in replacement for the OEM unit. It looks much better than the plastic factory unit and is available in anodized (black, Red and blue) finishes.

This tray is also a great option for turbocharged cars that have an open air filter in the stock location, this tray will help to minimize heat soak in to the intake from hot air exiting the radiator.

Please allow up to 4 weeks for delivery if out of stock.
Gates Air Conditioning (A/C) Belt for RX-8

Gates Air Conditioning (A/C) Belt for RX-8

High quality serpentine Micro "V" belt for the Air Conditioning system on your RX-8

Made by Gates ...

£ 10.99
add to cart
show details
High quality serpentine Micro "V" belt for the Air Conditioning system on your RX-8

Made by Gates
Gates Main Belt (Alternator + Water Pump) for RX-8

Gates Main Belt (Alternator + Water Pump) for RX-8

High quality serpentine Micro "V" belt to replace the main drive belt that drives both the alternator and water pump  on your RX-8<br /& ...

£ 13.99
add to cart
show details
High quality serpentine Micro "V" belt to replace the main drive belt that drives both the alternator and water pump  on your RX-8<br /> Made by Gates<br /><br /> Even thought these are not an item featured in the Mazda service plan for the RX-8 (they are only ever inspected Essex Rotary recommends a regular replacement of these belts to reduce the possibility of belt failure leading to both the Alternator and water pump not being driven, the main problem if this happens is your vehicle quickly overheating leading to engine damage.
Comma Super Longlife Coolant/Antifeeze 5L

Comma Super Longlife Coolant/Antifeeze 5L

5 Year Service Life In an industry where its becoming more and more confusing to select something as simple as coolant for your car Essex R ...

£ 19.99
add to cart
show details
5 Year Service Life In an industry where its becoming more and more confusing to select something as simple as coolant for your car Essex Rotary have made it simple. We have carefully selected this super long life coolant for is compatibility with the materials that make up your Mazda Rotary engine. Premixed to reduce mess and minimize hassle. A coolant specially selected for your rotary engine by the team here at Essex Rotary Each bottle contains 5 liters of premixed coolant ready to go. A normal coolant change will require 2 bottles (10 liters in total) this should be more then enough to cover any rotary model you may have.
Snow Performance Stage 1 Boost Cooler Water Methanol Kit

Snow Performance Stage 1 Boost Cooler Water Methanol Kit

Water Methanol Injection at its finest!

The gasoline Stage 1 Boost Cooler™ kit is available for forced inductio ...

£ 399.99
add to cart
show details

Water Methanol Injection at its finest!

The gasoline Stage 1 Boost Cooler™ kit is available for forced induction applications that are either fuel injected or carbureted. Operation is very simple: the system starts injecting when the boost switch reaches the user-adjustable point and it injects a fixed amount of fluid through the nozzle until the switch opens again. This makes it a good choice for low boost setups looking for an octane enhancement and cooler intake charge. Activation can also be set up through any other user-chosen switch, such as a full throttle switch, etc.

SnowPerformanceAuthorizedDealer450pxBoost Cooler Waterinjection

Obtain up to 10-25% more power in your turbo- or supercharged engine, even if it´s pre-tuned, by using the Boost Cooler?-Water/Methanol Injection System!

The main function of the Boost Cooler is to suppress detonation caused by high temperature and pressure developed within the combustion chamber when the effective compression ratio has been taken beyond the auto-ignition point by either a turbo or a supercharger. Water, with its high latent heat content, is extremely effective for controlling not only the onset of detonation but also the production of oxides of nitrogen in the modern leanburn engines.

Furthermore, the Boost Cooler doesn't create an intake restriction like an intercooler, and unlike race gas, it reduces intake air temps up to 60°C and improves charge air density too!

Snow Performance systems effectively steam clean intake when they inject. This reduces carbon build up. The Boost Cooler? can be installed in a matter of hours without having to remove bumpers or do custom intake piping.

Kit includes:
  • UHO (Ultra High Output) Pump
  • 3 Quart Reservoir
  • 2 Nozzles To Cover a Wide Range of Horsepower
  • Required Hardware Needed For Installation
  • Comprehensive Instructions
Note: Safe Injection can not be used with Stage 1 Gasoline Systems

Features:

  • Budget friendly Starter Kit
  • Efficient Intercooling, up to 60°C lower air intake temperature
  • Achieve approx. 116-Octan rating, by using ordinary 95-Octan gasoline
  • Reduces EGT and oil temperatures
  • Allows you to run safely more boost and/or more timing
  • Reduces thermical stress on NOS, LPG/Autogas and pre-tuned engines like chiptuning & higher boost levels
  • No wear issues, only clean combustion chambers
  • No loss of boost as with an intercooler
  • Reduces the specific fuel consumption
  • Easy installation
Snow Performance Stage 2 (Low Boost) Boost Cooler Water Methanol Kit

Snow Performance Stage 2 (Low Boost) Boost Cooler Water Methanol Kit

Water Methanol Injection at its finest!

Snows most popular kit for low/mid boost engines (<1.7bar) - with Vari ...

£ 569.99
add to cart
show details

Water Methanol Injection at its finest!

Snows most popular kit for low/mid boost engines (<1.7bar) - with Variable Injection (VC-20) and 300PSI/20bar Pumpsystem !

This kit progressively injects more or less water or water/alcohol, according to manifold boost pressure. The system is applicable for turbo/supercharged engines making up to 1.5bar of boost pressure. It has two dials to set the start and full points to tailor the delivery to your engines needs. Progressively injecting according to boost pressure allows for the most power over the widest range of rpms.

SnowPerformanceAuthorizedDealer450pxBoost Cooler Water injection



Obtain up to 10-25% more power in your turbo- or supercharged engine, even if it´s pre-tuned, by using the Boost Cooler?-Water/Methanol Injection System!

The main function of the Boost Cooler is to suppress detonation caused by high temperature and pressure developed within the combustion chamber when the effective compression ratio has been taken beyond the auto-ignition point by either a turbo or a supercharger.

Water, with its high latent heat content, is extremely effective for controlling not only the onset of detonation but also the production of oxides of nitrogen in the modern lean burn engines.Furthermore, the Boost Cooler doesn't create an intake restriction like an intercooler, and unlike race gas, it reduces intake air temps up to 60°C and improves charge air density too!

Snow Performance systems effectively steam clean the intake when they inject. This reduces carbon build up. The Boost Cooler? can be installed in a matter of hours without having to remove bumpers or do custom intake piping.

Boost controlled variable injection



This kit uses manifold boost pressure to determine when and how much fluid to inject. Proportionally injecting according to boost pressure gives the most accurate delivery of water-methanol and allows the most cooling and performance improvement over the widest range. More power and driveability is the result! It can be used on any forced induction engine.

The most suitable are the centrifugal supercharged and turbocharged engines, as they build boost is a more progressive manner concerning water-methanol injection. The positive displacement blower engines will work, but it might take more work to dial in the delivery. New: You can switch to a 0-5 Volt output signal from the Mass Air for injection controlling.

Kit includes:
  • UHO (Ultra High Output) Pump
  • 3 Quart Reservoir
  • Digital Variable Controller
  • 2 Nozzles To Cover a Wide Range of Horsepower
  • All Required Hardware Needed For Installation
  • Comprehensive Instructions

Features:

  • VC-20 control unit, Boost/MAP controlled, variable injection
  • Efficient Intercooling, up to 60°C lower air intake temperature
  • Achieve approx. 116-Octan rating, by using ordinary 95-Octan gasoline
  • Reduces EGT and oil temperatures
  • Allows you to run safely more boost and/or more timing
  • Reduces thermical stress on NOS, LPG/Autogas and pre-tuned engines like chiptuning & higher boost levels
  • No wear issues, only clean combustion chambers
  • No loss of boost as with an intercooler
  • Reduces the specific fuel consumption
  • Easy installation
Snow Performance Stage 2E Power-Max Boost Cooler Kit

Snow Performance Stage 2E Power-Max Boost Cooler Kit

Water Methanol Injection at its finest!

The latest development from Snow Performance!
Complete kit with ...

£ 649.99
add to cart
show details

Water Methanol Injection at its finest!

The latest development from Snow Performance!
Complete kit with freely programmable 52mm OLED-gauge and optionally Dual Stage Technology.

SnowPerformanceAuthorizedDealer450pxBoost Cooler Water Injection

Obtain up to 10-25% more power in your turbo- or supercharged engine, even if it´s pre-tuned, by using the Boost Cooler™-Water/Methanol Injection System!
The main function of the Boost Cooler is to suppress detonation caused by high temperature and pressure developed within the combustion chamber when the effective compression ratio has been taken beyond the auto-ignition point by either a turbo or a supercharger.

Water, with its high latent heat content, is extremely effective for controlling not only the onset of detonation but also the production of oxides of nitrogen in the modern lean burn engines.Furthermore, the Boost Cooler doesn't create an intake restriction like an intercooler, and unlike race gas, it reduces intake air temps up to 60°C and improves charge air density too!

Snow Performance systems effectively steam clean the valves, valve seats, and even the piston tops and intake when they inject. This reduces carbon build up. The Boost Cooler™ can be installed in a matter of hours without having to remove bumpers or do custom intake piping.

SnowPerformanceOLEDController300px52mm OLED Control Unit

The all new Snow Performance Stage 2 Boost Cooler water-methanol injection system comes fully revamped for all boosted (turbo- and supercharged) vehicles and uses a progressive 52mm-gauge style controller that proportionally injects more or less according to boost pressure.
Start and full points are adjustable for engagement and delivery curve to match what the engine requires. Proportionally injecting according to boost pressure gives an accurate delivery of water-methanol and allows cooling and performance improvements over a wide range for improved drivability.

Displays :

  • Boost pressure (S2E / EURO-Edition in BAR)
  • Boost Cooler percentage of injection
  • Low level of the fluid reservoir
  • Secondary nozzle activation (Dual Stage Technology, optionally as upgrade)
  • 2 specific fault modes (Clogged line, broken line)

Dual Stage Technology (DST)

The Stage 2 has the ability to progressively command 2 Hyper-Sonic™ Nozzles independently of one another. This sophisticated dual stage injection management yields the highest increases in HP and cooling along all stages of the engine allowing you to greatly increase the boost & timing of your vehicle safely.

Easy Installation

The settings on OLED control unit can be made within a few seconds without any prior knowledge. The only thing you need to determine is at what boost pressure the injection is to begin and what the maximum boost pressure is. - The variable injection of the Boost Cooler is performed within these two preset boost pressure points. By using the optionally Dual Stage Technology, you´re able to set a 2nd nozzle mapping for optimized injection quantity especially at higher engine load states.

Boost Cooler Stage 2 Power-MAX - Perfect for nearly all turbocharged engines

For positive displacement superchargers (Eaton, Twin Screw) and small fast spooling turbos see (e.g. K03/K04 turbochargers) use the Boost Cooler Stage 2 MAF or our Stage 3 kits for best performance.

Stage 2 POWER-MAX™ Europe Edition

Die Europe-Edition (display & programming in BAR) is exclusively available only by Snow Performance Europe and its European authorized dealers.

Features :

  • Boost referenced injection control For use with all centrifugal superchargers (ProCharger, Vortech) and large turbos (*)
  • Complete with our industry leading 300 PSI UHO pump and Hypersonic Nozzles™
  • Dual Stage Technology 2 nozzle control independently of one another (Optional, Upgrade Art.No.: SP10350 required)
  • 52mm gauge style progressive water-methanol controller
  • Dual tone 7 color OLED screen
  • Efficient Intercooling, up to 60°C lower air intake temperature
  • Achieve approx. 116-Octan rating, by using ordinary 95-Octan gasoline
  • Reduces EGT and oil temperatures
  • Allows you to run safely more boost and/or more timing
  • Reduces thermical stress on NOS, LPG/Autogas and pre-tuned engines like chiptuning & higher boost levels
  • No wear issues, only clean combustion chambers
  • No loss of boost as with an intercooler
  • Reduces the specific fuel consumption
  • Easy installation
Snow Performance Stage 3 EFI Boost Cooler Water Methanol Kit

Snow Performance Stage 3 EFI Boost Cooler Water Methanol Kit

Water Methanol Injection at its finest!

Our Top system for your Turbo-/Supercharged car. 2D-Mapping thrugh fuel i ...

£ 849.99
add to cart
show details

Water Methanol Injection at its finest!

Our Top system for your Turbo-/Supercharged car. 2D-Mapping thrugh fuel injection and/or boost. Easy programmable LCD-display incl. new Dual Stage Technology and terminated weather tight OEM harnessed wiring connections !
Award winning system - The controller creates a delivery map based boost and/or EFI signal. For all charged and naturally aspirated engines with traditional EFI system.

SnowPerformanceAuthorizedDealer450px

Boost Cooler Waterinjection

Obtain up to 10-25% more power in your turbo- or supercharged engine, even if it´s pre-tuned, by using the Boost Cooler™-Water/Methanol Injection System!
The main function of the Boost Cooler is to suppress detonation caused by high temperature and pressure developed within the combustion chamber when the effective compression ratio has been taken beyond the auto-ignition point by either a turbo or a supercharger.

Water, with its high latent heat content, is extremely effective for controlling not only the onset of detonation but also the production of oxides of nitrogen in the modern leanburn engines.Furthermore, the Boost Cooler doesn't create an intake restriction like an intercooler, and unlike race gas, it reduces intake air temps up to 60°C and improves charge air density too!

Snow Performance systems effectively steam clean the valves, valve seats, and even the piston tops and intake when they inject. This reduces carbon build up. The Boost Cooler™ can be installed in a matter of hours without having to remove bumpers or do custom intake piping.
SnowPerformanceProgressiveEFIController450px

Boost / Fuel Injection controlled variable injection

Award Winning System! - The Stage 3 Boost Cooler® is unmatched for accuracy and adjustability in water-methanol injection systems! This system can be used on any forced induction engine, or ANY engine with a traditonal EFI system, and features our LCD display with on-the-fly adjustability.

Easy Installation

Extremely easy to set up and dial in - the software creates a delivery map based on boost and/or EFI signal from just a few easy to set points you punch in from the drivers seat. The LCD Screen displays boost pressure, fuel injector duty cycle, as well as water-methanol injection percent. Quick, easy, positive adjustments are made with 2 push buttons. Low profile design allows for easy-to-view and discrete mounting

Dual Stage Technology

The Stage 3 has the ability to progressively command  2 Hyper-Sonic™ Nozzles independently of one another. This sophisticated dual stage injection management yields the highest increases in HP and cooling along all stages of the engine allowing you to greatly increase the boost & timing of your vehicle safely. The DST-Upgrade is already included in the Stage 3 systems.

Boost Cooler Stage 3 EFI - Ideal for any traditional manifold injection engines (electronic fuel inj.) :

  • AUDI Turbo (e.g. Audi A3 8L/8P, A4 B5/B6/B7, A6 C5, TT 8J/8N)
  • Opel Astra H (z.T. auch J), Insignia, Vectra C, Zafira
  • Porsche 911 Turbo (964, 993, 996), 924/944 Turbo
  • VW Turbo (Bora 1J, Golf 4,  Jetta 3, Passat 3B)
  • and many more.

Features:

  • Boost controlled, variable injection
  • Terminated weather tight OEM harnessed wiring connections
  • Dual Stage Technology
  • Efficient Intercooling, up to 60°C lower air intake temperature
  • Achieve approx. 116-Octan rating, by using ordinary 95-Octan gasoline
  • Reduces EGT and oil temperatures
  • Allows you to run safely more boost and/or more timing
  • Reduces thermical stress on NOS, LPG/Autogas and pre-tuned engines like chiptuning & higher boost levels
  • No wear issues, only clean combustion chambers
  • No loss of boost as with an intercooler
  • Reduces the specific fuel consumption
  • Easy installation
TRUST Greddy Universal General Purpose Breather Tank

TRUST Greddy Universal General Purpose Breather Tank

Designed originally for racing engines, today’s compact production engines can also benefit from the use of GReddy’s Radiator Breather T ...

£ 149.99
add to cart
show details
Designed originally for racing engines, today’s compact production engines can also benefit from the use of GReddy’s Radiator Breather Tank. This tank efficiently removes trapped hot air pockets within the cooling system which can eventually cause over heating, especially during spirited driving. Allows the radiator to perform more effectively, improving overall cooling performance. Requires radiator hose adapter for installation (sold separately).

TRUSTGReddyGeneralPurposeBreatherTank500px

This Item is a Universal fit so may require some custom pipe work to work correctly on some vehicles.

Please allow up to 28 days for delivery is not in stock.
Genuine Mazda FL22 Coolant 5 Liters

Genuine Mazda FL22 Coolant 5 Liters

Keep your engine cool in the Summer heat and prevent freezing in the winter with Genmuine FL22. Genuine Mazda FL22 Super Long Life Coolan ...

£ 26.99
add to cart
show details
Keep your engine cool in the Summer heat and prevent freezing in the winter with Genmuine FL22. Genuine Mazda FL22 Super Long Life Coolant, This is the coolant you need to be using if your rad cap indicated "FL222 on the top. Premixed and ready to use you will not need to dilute this with De-ionised water before filling your fooling system. FL22 comes in the optimal mix straight out of the bottle. Sold in 5 liter bottles We also sell 10 Liter Packs (2 bottles) that can be ordered via the drop down menu (wiith a combines shipping discount applied) A typical cooling system will require around 8 - 8.5 liters, if your running a large capacity Radiator then you may need more. A Shipping Discount is applied when buying 2 bottles at once (10 Liters from the drop down menu)
Mishimoto Adjustable Fan controller Kit

Mishimoto Adjustable Fan controller Kit

An ideal option if your looking to replace your Viscous cans found on older cars or installing oil cooler fans for some reason. This Mishim ...

£ 51.00
add to cart
show details
An ideal option if your looking to replace your Viscous cans found on older cars or installing oil cooler fans for some reason. This Mishimoto fan controller is much more affordable than other kits on the market.

Take full control of your electric cooling fan with the Mishimoto Adjustable Fan Controller Kit! This kit is applicable for any 12v electric fan and includes all necessary components for installation. This kit can be purchased with a probe-style temperature sensor or with a 1/8" NPT thread-in sensor to fit the needs of any project. The Mishimoto Fan Controller features adjustable activation from 66°C to 116°C and deactivates once temperatures are reduced by 6°C. This controller includes a built-in A/C override feature and is designed for use with 1–2 electric fans drawing a combined 25 amps or less. The Mishimoto Adjustable Fan Controller Kit includes the Mishimoto Lifetime Warranty.

Adjustment is simple via means of a slot head screwdriver to adjust the dial on the control box.
  • Applicable for any vehicle with a 12v electric fan
  • Adjustable activation temperature from 66°C to 116°C
  • Includes probe or 1/8" NPT style temperature sensor to fit your needs
  • Includes 7 ft of wire for installation in nearly any size vehicle
  • Built-in A/C override feature
  • Designed for use with 1–2 electric fans drawing a combined 25 amps or less
  • Includes wiring connectors and hardware for installation
  • Mishimoto Lifetime Warranty
Essex Rotary would recommend the selection of the the 1/8th npt sensor over the probe style. The sensor can be installed in to a hose adapter like the Mishimoto hose adaptor.
Mishimoto Slim Electric Fan 8″

Mishimoto Slim Electric Fan 8″

Ideal option for installation of Oil coolers for additional cooling if needed.

This fan can be used as an upgrade to the OEM ...

£ 44.00
add to cart
show details
Ideal option for installation of Oil coolers for additional cooling if needed.

This fan can be used as an upgrade to the OEM fan for more efficient cooling or fitment issues with aftermarket products. With its slim design, the fan can easily be installed flush against a radiator. For universal installation, use Mishimoto universal fan mount kit.
  • High-flow fan provides 600 cfm of airflow
  • Universal fitment
  • Compact design with a diameter of 203 mm and an overall thickness of only 80 mm provides increased engine bay space
  • Mishimoto Lifetime Warranty
Specs
  • Housing Diamiter - 8.375"
  • Blade Diamiter - 7.5"
  • CFM Rating - 600cfm
  • Fan Speed - 3000rpm
  • Current - ~8A
  • Voltage - 12.25volts
 
Mishimoto Slim Electric Fan 10″

Mishimoto Slim Electric Fan 10″

This fan can be used as an upgrade to the OEM fan for more efficient cooling or fitment issues with aftermarket products. With its slim desi ...

£ 48.00
add to cart
show details
This fan can be used as an upgrade to the OEM fan for more efficient cooling or fitment issues with aftermarket products. With its slim design, the fan can easily be installed flush against a radiator. For universal installation, use Mishimoto universal fan mount kit.
  • High-flow fan provides 950 cfm of airflow
  • Universal fitment
  • Compact design with a diameter of 255 mm and an overall thickness of only 60 mm provides increased engine bay space
  • Easily reversible for use as a pusher or puller fan
  • Mishimoto Lifetime Warranty
Specs
  • Housing Diamiter - 11.5"
  • Blade Diamiter - 255mm
  • CFM Rating - 950cfm
  • Fan Speed - 2300rpm
  • Current - 13.08A (inrush)
  • Current - 6.8A (normal)
  • Voltage - 12volts
Mishimoto Slim Electric Fan 12″

Mishimoto Slim Electric Fan 12″

This fan can be used as an upgrade to the OEM fan for more efficient cooling or fitment issues with aftermarket products. With its slim desi ...

£ 54.00
add to cart
show details
This fan can be used as an upgrade to the OEM fan for more efficient cooling or fitment issues with aftermarket products. With its slim design, the fan can easily be installed flush against a radiator. For universal installation, use Mishimoto universal fan mount kit.
  • High-flow fan provides 1150 cfm of airflow
  • Universal fitment
  • Compact design with a diameter of 305 mm and an overall thickness of only 63.5 mm provides increased engine bay space
  • Easily reversible for use as a pusher or puller fan
  • Mishimoto Lifetime Warranty
Specs
  • Housing Diamiter - 12.5"
  • Fan Diamiter - 285mm
  • Blade Diamiter - 11"
  • CFM Rating - 1150cfm
  • Fan Speed - 2000rpm
  • Current - 12.7A (inrush)
  • Current - 7.6A (normal)
  • Voltage - 12volts
Mishimoto Slim Electric Fan 14″

Mishimoto Slim Electric Fan 14″

This fan can be used as an upgrade to the OEM fan for more efficient cooling or fitment issues with aftermarket products. With its slim desi ...

£ 56.00
add to cart
show details
This fan can be used as an upgrade to the OEM fan for more efficient cooling or fitment issues with aftermarket products. With its slim design, the fan can easily be installed flush against a radiator. For universal installation, use Mishimoto universal fan mount kit.
  • High-flow fan provides 1300 cfm of airflow
  • Universal fitment
  • Compact design with a diameter of 328 mm and an overall thickness of only 63.5 mm provides increased engine bay space
  • Easily reversible for use as a pusher or puller fan
  • Mishimoto Lifetime Warranty
Specs
  • Housing Diamiter - 14.75"
  • Fan Diamiter - 328mm
  • Blade Diamiter - 12.875"
  • CFM Rating - 1300cfm
  • Fan Speed - 2200rpm
  • Current - 15.1A (inrush)
  • Current - 7.8A (normal)
  • Voltage - 12volts
Mishimoto Slim Electric Fan 16″

Mishimoto Slim Electric Fan 16″

This fan can be used as an upgrade to the OEM fan for more efficient cooling or fitment issues with aftermarket products. With its slim desi ...

£ 63.00
add to cart
show details
This fan can be used as an upgrade to the OEM fan for more efficient cooling or fitment issues with aftermarket products. With its slim design, the fan can easily be installed flush against a radiator. For universal installation, use Mishimoto universal fan mount kit.
  • High-flow fan provides 1850 cfm of airflow
  • Universal fitment
  • Compact design with a diameter of 406 mm and an overall thickness of only 73 mm provides increased engine bay space
  • Easily reversible for use as a pusher or puller fan
  • Mishimoto Lifetime Warranty
Specs
  • Housing Diamiter - 16.75"
  • Fan Diamiter - 385mm
  • Blade Diameter - 15.375"
  • CFM Rating - 1850cfm
  • Fan Speed - 1800rpm
  • Current - 34.0A (inrush)
  • Current - 7.18A (normal)
  • Voltage - 12volts
Revolution Extra Capacity Differential Cover for RX-8

Revolution Extra Capacity Differential Cover for RX-8

Add an extra 750cc of oil to your RX-8's differentials capacity. and aid cooling.

Increasing the capacity of your differentia ...

£ 479.00
add to cart
show details
Add an extra 750cc of oil to your RX-8's differentials capacity. and aid cooling.

Increasing the capacity of your differential is something that is quite often overlooked on a performance car. Though the stock diff holds around 1.4 litres of oil increasing its capacity can aid cooling of everything back there and prolong the life of your expensive aftermarket Diff if fitted.

RevolutionRX-8HighCapacityRearDifferentialCover300px

A great upgrade for those looking to take their car on track. Revolution understand cooling of the diff is very important so have also integrated cooling fits in to their design.

Made from cast aluminium, this cover increases the diffs oil capacity by around 750cc
This Diff cover is compatible with all model years of the RX-8

This is currently a special order item only, if your in a hurry for it we would recommend contacting us prior to ordering online for availability.
Koyo Racing Radiator 48mm Core for Manual RX-8 R3 Only

Koyo Racing Radiator 48mm Core for Manual RX-8 R3 Only

A slightly thinner core that the 53mm Series 1 version with a saving to boot, plus a New Improved Price With cooling being so important to ...

£ 379.99
add to cart
show details
A slightly thinner core that the 53mm Series 1 version with a saving to boot, plus a New Improved Price With cooling being so important to rotaries why not look at upgrading your cooling system. a Koyorad can aid in dropping your coolant temps significantly. Their high quality aluminium construction and OEM fitment means your not paying to have it modified (like many cheaper "racing" radiators) The KOYO R-Series Core radiator provides improved cooling coverage for both street and track applications combined with show quality looks and finish Construction is held to tight quality control standards that are illustrated in the outstanding Heliarc soldering, pristine tube and fin alignment, and mirror-like surface finish. The tubes, fins, headers, and brackets are brazed in a state-of-the-art Nocolok furnace, which bonds these components into a virtually indestructible radiator unit. KoyoRadLogo All fan mounts are situated to OE specifications, and using the OEM mounting locations facilitates fitment into the RX-8. Why not include a set of SFS Performence Radiator hoses with your new cooling upgrade Suitable for 2008-2011 RX-8 R3 models with Manual transmission only Please allow 7-14 days for delivery depending on stock levels. PICTURE IS FOR ILLUSTRATION PURPOSES ONLY
Evans Powercool 180 Waterless Coolant 5 Liters

Evans Powercool 180 Waterless Coolant 5 Liters

Evans Power Cool 180 is the coolant of choice for many professional racing teams and performance car specialists. For use in all performance ...

£ 64.99
add to cart
show details
Evans Power Cool 180 is the coolant of choice for many professional racing teams and performance car specialists. For use in all performance car engines primarily fabricated from aluminium, plus some steel and copper components.

Conversion from a water-based coolant to Evans is a straight forward process that can be undertaken by anyone with some basic experience in engine mechanics.

EvansCoolantLogo500px The primary objective of converting to Evans Waterless Engine Coolant is to eliminate all of the problems associated to water:

Eliminates Overheating
Evans Waterless Coolants have a boiling point above 180°C and will not vaporise, thus eliminating overheating, boil-over and after-boil.

Reduces Pressure
Evans Waterless Coolants generate very low vapour pressures reducing strain on engine hoses and cooling system components.

Prevents Corrosion
Water promotes corrosion via oxidation and electrolysis. Evans Waterless Coolants contain no oxygen and are virtually non-conductive effectively preventing corrosion.

Maximise BHP
Evans Waterless Coolants eliminate pre-ignition and detonation caused by overheating - thus increasing combustion efficiency and delivering more power.

Stops Erosion
Evans Waterless Coolants stop cavitation and eliminate liner and cooling pump erosion.

Freeze Protection
Evans Waterless Coolants freeze below -40ºC

Non-Toxic
Evans Waterless Coolants are proven to be Non-Toxic. Standard anti-freeze is toxic and known to kill pets.

If the engine to be converted is currently filled with a water-based coolant an important part of a good installation is using Evans Prep Fluid. Prep Fluid is specifically formulated to purge remaining water-based antifreeze from the system after initial drain. Evans Prep Fluid is sold separately and available just below.

2 x 5 Litre cans will be required to fill a full cooling system of most RX-7's or RX-8's
We are offering a Discounts for 2 bottle packs plus combined delivery discount if buying two bottles together to be shipped to a UK Mainland address, Simply select your desired quantity from the drop down menu.
Evans Prep Fluid 5 Litres

Evans Prep Fluid 5 Litres

Evans Prep Fluid MUST be used before Evans coolant is installed in your cooling system for the first time, when converting from traditional ...

£ 39.99
add to cart
show details
Evans Prep Fluid MUST be used before Evans coolant is installed in your cooling system for the first time, when converting from traditional coolant.

Evans Prep Fluid is specifically formulated to hygroscopically absorb any water-based coolant remaining in the cooling system after initial drain. Because certain parts of the cooling system might not drain out with gravity, and it would take too long to disconnect every pipe etc., installing a scavenging fluid is the most practical method of removing all the water-based coolant.

EvansCoolantLogo500px The Prep Fluid is not formulated to chemically clean the engine of rust and scale, but the process of circulation and draining will help remove any loose sediment.

Evans Prep Fluid must be used before converting from a water based coolant to Evans Waterless Engine Coolant.

2 x 5 Litre cans will be required to fill a full cooling system of most RX-7's or RX-8's
We are offering a Discounts for 2 bottle packs plus combined delivery discount if buying two bottles together to be shipped to a UK Mainland address, Simply select your desired quantity from the drop down menu.
Evans Cooling System Full Conversion Pack (5% Bundle Deal)

Evans Cooling System Full Conversion Pack (5% Bundle Deal)

This Kit contains everything you will need to carry out the conversion from conventional coolant over to Evans Waterless Coolant on your Maz ...

£ 199.46
add to cart
show details
This Kit contains everything you will need to carry out the conversion from conventional coolant over to Evans Waterless Coolant on your Mazda RX-7 or RX-8.

Plus we are offering  5% Discount when purchasing this pack compared to purchasing everything individually.

This Kit Contains the following;
  • 2 x 5 Litre bottles of Evans Prep Fluid.
  • 2 x 5 Litre bottles of Evans Power Cool 180 Waterless Coolant.
EvansCoolingSystenConversionPack500px

This is the perfect starter pack to carry our a full conversion offered with a great bulk shipping discount.

Before using Evans Waterless coolant for the first time it is advised that Evans Prep fluid is used to flush the cooling system of ay remaining water based coolant, This is essential for a successful conversion to Evans Waterless coolant.

For more information on Prep Fluid and Power Cool 180 can be found in their individual product descriptions above.
RE-medy Enhanced High Flow Billet Water Pump for 2003-2008 RX-8

RE-medy Enhanced High Flow Billet Water Pump for 2003-2008 RX-8

Now available from us right here in the UK.

The RE-medy water pump has been designed by our friends from Mazmart in the USA, ...

£ 350.00
add to cart
show details
Now available from us right here in the UK.

The RE-medy water pump has been designed by our friends from Mazmart in the USA, They take a new genuine water pump and install their very own high quality billet impeller on it, This helps increase flow while decreasing cavitation at higher RPM.

This high flow RE-medy water pump is designed to prevent cavitation at engine speeds as high as 10000 rpm.

It is a direct fitment, as OEM and comes with a new Mazda OEM gasket. RE-medyRX-8WaterPump450px

RX-8 water pump for series 1 version, 2003-2008.

Shopping Cart

 

Shop categories

ajax
ajax