REMEMBER TO CHOOSE THE CORRECT SHIPPING OPTION BEFORE ADDING ITEMS TO THE CART!

Royal Purple HP-2C (Premix) 6 Pack

Royal Purple HP-2C (Premix) 6 Pack

6 Pack of Royal Purple HP-2C or High Performance 2 Cycle (formally known as 2-Cycle TCWIII) Saving of £38.94 on our delivered price Roya ...

£ 100.00
add to cart
show details
6 Pack of Royal Purple HP-2C or High Performance 2 Cycle (formally known as 2-Cycle TCWIII) Saving of £38.94 on our delivered price Royal Purple HP-2C (premix) oil is suitable for both premix and injection delivery to the engine. So is ideal for owners running the SOHN adapters on their OMP system. Royal Purple HP-2C is recommended for use in both pre-mixed and oil injected gasoline 2-cycle engines in outboard motors, motorcycles, jet skis, chain saws, etc. Royal Purple HP-2C is a high performance engine oil that improves performance and reduces wear in both standard and high performance 2-cycle gasoline engines. RoyalPurpleLogomd HP-2C has synthetic solvency that keeps spark plugs and exhaust ports clean for maximum engine efficiency. This engine cleanliness combined with the low coefficient of friction of Royal Purple HP-2C promotes increased horsepower and engine speed. Engines operate with greater combustion efficiency and go longer between overhauls when lubricated with RP HP-2C. PERFORMANCE ADVANTAGES
  • Greater wear protection.
  • Clean, efficient engines.
  • Rust / corrosion protection.
  • Increased performance.
  • Ashless to minimize exhaust deposits.
6 Pack will save you £7.98 on our collected price when bought individually or £38.98 off the equivelent delivered price of 6 bottles. Each bottle contains 1 US Quart (0.946L)
CUSCO Front and Rear ARB Kit (inc droplinks) for RX-8

CUSCO Front and Rear ARB Kit (inc droplinks) for RX-8

Save over £60.00 when buying this excellent CUSCO front and rear anti roll bar kit with drop links for your Mazda RX-8, this kit is avai ...

£ 455.00
add to cart
show details

Save over £60.00 when buying this excellent CUSCO front and rear anti roll bar kit with drop links for your Mazda RX-8, this kit is available at a massive saving over buying them individually and also includes a set of our high quality OE spec replacement drop links just to make thins that little sweeter and easier top install.

Front ARB is 28mm tubular construction and rear ARB is 18mm solid construction, also included are 2 front ARB drop links and 2 Rear Drop Links with an individual value of over £100 alone.

CuscoLogo

The Cusco Anti Roll Bars replace the factory ARB, (if equipped) and uses the factory mounting locations.  The Cusco ARB will dramatically reduce body roll since its stiffness is greater than the factory bar or if the vehicle is not equipped with one.  The larger diameter and steel strength bar give the Cusco bar more resistance against torsion, which helps keep the vehicle stabilized during cornering and reduces weight transfer.

This kit includes replacement rubber bushings and new clamps if needed

Essex Rotary recommend replacing your droplinks at the same time as your ARB as many of the OEM links are very difficult to remove in our experience, this is why we have bundled the drop links in with this great package.

Please allow up to 28 days for delivery when out of stock.
CUSCO RX-8 Suspension Overhaul Kit

CUSCO RX-8 Suspension Overhaul Kit

This CUSCO kit has been compiled by Essex rotary as a great upgrade and overhaul for your suspension, selected to help stiffen your cars cha ...

£ 795.00
add to cart
show details
This CUSCO kit has been compiled by Essex rotary as a great upgrade and overhaul for your suspension, selected to help stiffen your cars chassis, improve turn on and reduce body roll. Excellent for both fast road and track use. This kit includes the following items.
  • CUSCO front strut brace with brake master cylinder stopper.
  • CUSCO rear upper strut brace.
  • CUSCO 28mm front tubular anti roll bar.
  • CUSCO 18mm solid rear anti roll bar.
  • High quality OE spec replacement droplink set.
The strut braces will improve chassis stiffness and turn on while the brake master cylinder stopper will improve brake pedal feel, combine this with the anti roll bar set to dramatically reduce body roll through the corners. CuscoLogo To round this kit out and make installation a lot easier Essex Rotary also include a new set of our high quality drop links (set of 4) Cusco are world leaders in chassis and suspension technology with a passion for developing products that customers demand. Please allow up to 28 days for delivery of this kit. 
Essex Rotary Type-KO Eye Lids for 04-08 RX-8

Essex Rotary Type-KO Eye Lids for 04-08 RX-8

Special Pre-Order Price on our new Type-KO Eye Lids for the Series 1 RX-8

We are offering these at just £50.00 for a limited ti ...

£ 50.00
add to cart
show details
Special Pre-Order Price on our new Type-KO Eye Lids for the Series 1 RX-8

We are offering these at just £50.00 for a limited time only.
EssexRotaryTypeKOEyeLidsRX8-240px The Full Retail Price will be £69.99 per Pair.


These are made from high quality FRP with a white gelcoat finish.
Essex Rotary Type-MZ Rear Spats for R3

Essex Rotary Type-MZ Rear Spats for R3

PLEASE NOTE THESE WILL ONLY FIT THE SERIES 2 RX-8 (R3) BUILT AFTER 2008
Essex Rotary are pleased to offer you our Ty ...

£ 99.99
add to cart
show details
PLEASE NOTE THESE WILL ONLY FIT THE SERIES 2 RX-8 (R3) BUILT AFTER 2008
Essex Rotary are pleased to offer you our Type-MZ Rear Spats to fit your RX-8 R3. These are styles from the MZ-Customs Spats from Japan.

EssexRotaryTypeMZSpatsR3-240px

Made from high quality British fiberglass and manufactured here in the UK exclusively for Essex Rotary. The R3 with is facelift front bumper and side skirts has always lacked that "something" at the back end. This is where our rear spats come in.

Simply to fit and with minimum (if any) modification to the part required. Essex Rotary Always Recommend test fitting by a professional prior to painting so that any adjustment (to fit to your likeing) can be made prior to paint.

Made from fibreglass with a gelcoat finish prep should be simply in order to get them ready for paint.
Competition Clutch Stage 2 Clutch Upgrade for RX-8 (5% Off Special)

Competition Clutch Stage 2 Clutch Upgrade for RX-8 (5% Off Special)

Essex Rotary are please to offer this high quality Stage 2 Clutch Package for your RX-8 with a 10% Discount over buying everything seperatly ...

£ 716.09
add to cart
show details
Essex Rotary are please to offer this high quality Stage 2 Clutch Package for your RX-8 with a 10% Discount over buying everything seperatly.

This kit includes the following components assembles to provide a complete upgrade and overhaul of your clutch package in either 192, 231, R3 or Imported RX-8's of all years

The Kit includes the following parts.
    CompClutcStage2RX-8Package300px
  • Competition Clutch Stage 2 Clutch Kit
  • Competition Clutch Ultralight 4.3Kg Flywheel
  • Competition Clutch Counterweight
  • Competition Clutch Clutch Release Bearing
  • Pilot Bearing and Seal
  • Clutch alignment Tool
  • Flywheel to Counterweight Bolt

Individually this kit would cost £753.78 however we are offering a 5% discount for a limited time only, bringing the package price down to £716.09 (+p&p if required)

The Flywheel will allow your engine to accelerate through the rev range more freely while the clutch is designed to handle greater demands while still maintaining a relitlvly streetable clutch pedal feel.  The Competition Clutch Stage 2 Clutch would be the equivilent to a stage between an Exedy Stage 2 and and exedy stage 2 Clutch while maintaining the pedal feel of a stage 1 kit.

Currently being run with great results on our own turbocharged RX-8.
Idemitsu Racing Rotary Premix 6 Pack

Idemitsu Racing Rotary Premix 6 Pack

Save on a 6 bottle pack plus combined Shipping. Save £11.94.00 on this pack, This pack works out at £12.00 per bottle ...

£ 72.00
add to cart
show details
Save on a 6 bottle pack plus combined Shipping. Save £11.94.00 on this pack, This pack works out at £12.00 per bottle Possibly The Best Rotary Premix You Can Buy Inherently with many rotary engines, the entirety of the rotor and housing are not being sufficiently lubricated, resulting in premature wear or damage. In order to increase lubrication within the rotary, Idemitsu developed Idemitsu Rotary Premix.  At 1/2 oz per gallon of fuel, it is a cost effective way lubricate more of your engine and prevent premature catastrophic damage. IdemitsuLogoLongWhite750px
  • A special blend of base oils reduces deposits and subsequent exhaust port clogging. As a result, your rotary will maintain the power at which it was designed.
  • Special detergent/dispersant additives keep you fuel injectors clean to reduce maintenance.
  • Provides additional lubrication for apex and side seals to increase seal life and increase efficiency of engine.
  • Special additives allow for better sealing of the chamber, creating greater efficiency and more power.
  • Idemitsu Lubricants America Corporation recommends the use of the Ratio Rite Measuring cup to ensure a proper mixture of Premix Rotary Fuel Lube and gasoline.
A full synthetic oil specially formulated for your rotary engine from Idemitdu Each Bottle contains 1 US Quart of Oil
Idemitsu Racing Rotary Premix 12 Pack

Idemitsu Racing Rotary Premix 12 Pack

Save on a 12 bottle pack plus combined Shipping. Save over £35.00 on this pack, This pack works out at £11.00 per bottle. ...

£ 132.00
add to cart
show details
Save on a 12 bottle pack plus combined Shipping. Save over £35.00 on this pack, This pack works out at £11.00 per bottle.
Possibly The Best Rotary Premix You Can Buy

Inherently with many rotary engines, the entirety of the rotor and housing are not being sufficiently lubricated, resulting in premature wear or damage. In order to increase lubrication within the rotary, Idemitsu developed Idemitsu Rotary Premix.  At 1/2 oz per gallon of fuel, it is a cost effective way lubricate more of your engine and prevent premature catastrophic damage.

IdemitsuLogoLongWhite750px
  • A special blend of base oils reduces deposits and subsequent exhaust port clogging. As a result, your rotary will maintain the power at which it was designed.
  • Special detergent/dispersant additives keep you fuel injectors clean to reduce maintenance.
  • Provides additional lubrication for apex and side seals to increase seal life and increase efficiency of engine.
  • Special additives allow for better sealing of the chamber, creating greater efficiency and more power.
  • Idemitsu Lubricants America Corporation recommends the use of the Ratio Rite Measuring cup to ensure a proper mixture of Premix Rotary Fuel Lube and gasoline.
A full synthetic oil specially formulated for your rotary engine from Idemitdu Each Bottle contains 1 US Quart of Oil
Essex Rotary Type-99Spec Front Bumper inc Lip for RX-7 FD3s

Essex Rotary Type-99Spec Front Bumper inc Lip for RX-7 FD3s

Another Awesome Replica of the much sought after 99 Sped Front Bumper, This Package includes our one piece 99-aspec front lip ad a discounte ...

£ 350.00
add to cart
show details
Another Awesome Replica of the much sought after 99 Sped Front Bumper, This Package includes our one piece 99-aspec front lip ad a discounted bundle price. SAVE £50.00 when you buy them together at the same time.

Made from high quality fiber glass in the UK this front bumper is designed with a "Kit Fit Lip"

Kit Fit Lip
Our Kit Fit Lip allows for perfect fitment even if your stock body panels are out of line a little.
Something that is all too often the case on Vehicles the age of the RX-7.
It is designed to be shaved down where needed to achieve a perfect fit according to your panel alignment. Fitment is recommended to be carried out by a professional. though with some time, the right tools and some patience these bumpers can be fitted at home by someone with competent skill.

DO NOT SIMPLY SHAVE THE WHOLE FIT LIP OFF PRIOR TO INSTALLATION AS YOU WILL BE LEFT WITH LARGE GAPS IN SOME AREAS. 

Please allow up to 3 weeks for delivery of this part if out of stock.

Image is for illustration purposes only
Evans Cooling System Full Conversion Pack (5% Bundle Deal)

Evans Cooling System Full Conversion Pack (5% Bundle Deal)

This Kit contains everything you will need to carry out the conversion from conventional coolant over to Evans Waterless Coolant on your Maz ...

£ 199.46
add to cart
show details
This Kit contains everything you will need to carry out the conversion from conventional coolant over to Evans Waterless Coolant on your Mazda RX-7 or RX-8.

Plus we are offering  5% Discount when purchasing this pack compared to purchasing everything individually.

This Kit Contains the following;
  • 2 x 5 Litre bottles of Evans Prep Fluid.
  • 2 x 5 Litre bottles of Evans Power Cool 180 Waterless Coolant.
EvansCoolingSystenConversionPack500px

This is the perfect starter pack to carry our a full conversion offered with a great bulk shipping discount.

Before using Evans Waterless coolant for the first time it is advised that Evans Prep fluid is used to flush the cooling system of ay remaining water based coolant, This is essential for a successful conversion to Evans Waterless coolant.

For more information on Prep Fluid and Power Cool 180 can be found in their individual product descriptions above.

Shopping Cart

WORLD LEADERS

 

Shop categories

Current Time
We are OPEN
We are open now and we are ready to answer your emails asap.
Closing in 3 hr 31 mins
ajax
ajax