REMEMBER TO CHOOSE THE CORRECT SHIPPING OPTION BEFORE ADDING ITEMS TO THE CART!

FEED Triple 52mm Gauge Pod for 04-08 RX-8

FEED Triple 52mm Gauge Pod for 04-08 RX-8

FEED triple 52mm gauge pod (meter panel) is designed to fit the series 1 RX-8 only. The FEED Panel Cover will allow you to add an additional ...

£ 225.00
add to cart
show details
FEED triple 52mm gauge pod (meter panel) is designed to fit the series 1 RX-8 only. The FEED Panel Cover will allow you to add an additional 3 gauges to keep an eye on your 13B RENESIS. The pod mounts in the middle of the dash and is composed of ABS. The high quality finish from FEED will insure a easy clean installation and OEM appearance. Being a Japanese product the gauges are slanted slightly to the right to make quick reference easier FEED3MeterPanal420px Simple Instalation Adhesive tape is already stuck to the panel and its simply a case of removing the existing panel then cutting out the section in the middle that is already marked from the factory. once this is done, clean the surface and stick it down using some clamps to hold everything together while the glue cures. Refit and Enjoy. Please allow up to 28 working days for delivery if not in stock
Essex Rotary Aluminium Undertray for RX-8 inc R3

Essex Rotary Aluminium Undertray for RX-8 inc R3

This brand new product is the first we have developed. Laser cut from 2mm thick Aluminium this under tray provides superior  rigidity to th ...

£ 65.00
add to cart
show details
This brand new product is the first we have developed. Laser cut from 2mm thick Aluminium this under tray provides superior  rigidity to the floor of your cars front end at high speed, and is a perfect upgrade if you have damaged your original.

This tray simply slips in to place and retails all the original factory fastener locations. Lightweight and visually appealing this excellent under tray also features the hole for the stock radiators drain plug.

8TechUndertrayFittedforRX8420px

Features

  • Lightweight Laser Cut Aluminium Construction
  • 2mm thick for superior strength without adding significant weight.
  • Easy Installation using factory fastening points
  • Factory radiator drain hole
  • Superior front under tray rigidity at high speed.
8TechUndertrayForRX-8420px
Mishimoto 1.3bar Radiator Cap

Mishimoto 1.3bar Radiator Cap

Getting the most out of your performance parts comes down to the details. When faced with hard driving conditions, a vehicle's cooling sy ...

£ 15.60
add to cart
show details

Getting the most out of your performance parts comes down to the details. When faced with hard driving conditions, a vehicle's cooling system becomes highly pressurized. Stock caps are not equipped to handle higher pressure, causing fluid to leak out into the overflow reservoir. The Mishimoto High-Pressure 1.3 Bar Radiator cap will keep coolant where it needs to be, flowing within the system. This cap fits most import vehicles.

    MishimotoRadCapSmall270px

Also Available in Carbon Fibre

Please allow up to 14 days for delivery
Mishimoto 1.3Bar Radiator Cap with Temp Gauge

Mishimoto 1.3Bar Radiator Cap with Temp Gauge

A perfect replacement for your OEM radiator cap, the Mishimoto Temperature Gauge cap will provide increased pressure tolerance (1.3 Bar), ...

£ 45.60
add to cart
show details

A perfect replacement for your OEM radiator cap, the Mishimoto Temperature Gauge cap will provide increased pressure tolerance (1.3 Bar), while providing an accurate temperature reading of your coolant.

MishimotoTempGaugeRadCap270pxMishimoto-warranty-seal
Mishimoto Long Weighted Shift Knob

Mishimoto Long Weighted Shift Knob

The Mishimoto Shift Knob provides a superior alternative to your factory shift knob. The weighted shift knob allows for smoother, faster ...

£ 34.99
add to cart
show details

The Mishimoto Shift Knob provides a superior alternative to your factory shift knob. The weighted shift knob allows for smoother, faster shifting while the signature "M" logo and polished black or silver finish adds some Mishimoto flair to your interior.

Mishimoto Long Shift Knobs spec; Mishimoto-warranty-seal

  • Weight 363grans
  • 3.42inches long
  • 1.23inches diameter
  • includes 3 plastic inserts for multiple application fitment
Available in Black of Silver with a selection of collars for universal fitting to most vehicles.

Please allow up to 14 days for delivery.

    MishimotoLongShiftKnobs270px
CUSCO Spin Turn Drift Knob for E-brake

CUSCO Spin Turn Drift Knob for E-brake

This handbrake button CUSCO Japan is a replacement that will allow you to convert your standard handbrake mechanism in to a drift style f ...

£ 32.50
add to cart
show details

This handbrake button CUSCO Japan is a replacement that will allow you to convert your standard handbrake mechanism in to a drift style fly off handbrake.

Simply push in the spinturn knob and the ratchet mechanism is disabled allowing skidz to be carried out. To engage the ratchet system and lock the rear brakes for parking simply lift the brake handle then flip out the button with your thumb.

    CuscoLogo available in.
    • Red
    • Blue
    • Silver

    A great little addition to any interior.. This button is made for the RX7-FC3s but will fit the FD3s and RX8 (Minor modification to the Handbrake or a small threaded stand off may be required for install on the RX or RX-8) in all cases the knob will need locking in position using loctite when installing it on the threaded shaft of the handbrake mechanism.

    !Always Hoon Responsibly!
    Racing Beat Type-II Oil Press & Temp Sensor Adapter

    Racing Beat Type-II Oil Press & Temp Sensor Adapter

    The Racing Beat-designed TYPE II Oil Pressure and Temperature Sensor Adapter unit is compatible with select 1971-92 12A and 13B engines, 200 ...

    £ 89.99
    add to cart
    show details
    The Racing Beat-designed TYPE II Oil Pressure and Temperature Sensor Adapter unit is compatible with select 1971-92 12A and 13B engines, 2004-2008 RX-8 engines and 1999-2005 Miata engines.

    The TYPE II Oil Pressure and Temperature Sensor Adapter unit allows for easy installation of sender units for most popular gauges (1/8-inch female pipe for oil pressure and 3/8-inch female pipe for oil temperature). Due to clearance and fitting restrictions, this adapter is not suitable for use on: 2009-11 RX-8s.

    The machined-aluminum adapter will accommodate either mechanical or electrical senders. The adapter mounts immediately below the oil filter unit and includes a mounting O-ring and detailed installation instructions. Easily installs by simply removing the oil filter. Gauges, senders, and adapter nuts are not included.

    WARNING! RX-8 owners, are you aware that the "gauge" that appears on the dash of your RX-8 is not actually a functional gauge? Have you ever seen it move? Not only have we discovered that this is a non-operational gauge, but there isn't even an oil pressure sensor on the engine! Nope, the gauge will never move from the position that you see. (There is a functioning oil level sensor and dash light.) Remedy this with the installation of your own gauge(s) in your RX-8.
    Racing Beat RX-8 Water Temperature Adaptor

    Racing Beat RX-8 Water Temperature Adaptor

    The Racing Beat-engineered Water Temperature Sensor Adapter for the 2004-2010 RX-8 allows for easy installation of a sender unit for most po ...

    £ 41.99
    add to cart
    show details
    The Racing Beat-engineered Water Temperature Sensor Adapter for the 2004-2010 RX-8 allows for easy installation of a sender unit for most popular aftermarket gauges (3/8-inch female pipe).

    The machined-aluminum adapter will accommodate either mechanical or electrical senders. The adapter mounts on the relatively easily accessible heater hose in the engine compartment and can be easily installed in just a few minutes. (This heater hose has continuous coolant flow-through during engine operation.) Includes mounting hardware and installation instructions. Gauges and senders are not included.
    Black Halo Racing Motor Mounts for RX-8

    Black Halo Racing Motor Mounts for RX-8

    Black Halo Racing Accept No Substitutes!

    Keeping in the Black Halo Racing tradition of offering the finest original produ ...

    £ 425.00
    add to cart
    show details

    Black Halo Racing Accept No Substitutes!

    Keeping in the Black Halo Racing tradition of offering the finest original products for your Mazda RX-8, here is the Performance Motor Mount set which is intended to alleviate one of the most frustrating issues plaguing the Mazda RX-8; weakening/collapsed OEM motor mounts. When the OEM motor mounts become weak the transmission shifter will start to annoyingly shake, extreme vibrations are felt within the car, and the driver will experience throttle delays/lack of response. The BHR Performance Motor Mount set will solve these problems and it will do so with greater longevity than the factory motor mounts.

    Note; due to the design of these mounts as compared to the OEM units, there may be some vibrations felt at certain RPMs.

    The motor mount housings are billet aluminum, anodized black to match the appearance of the rest of Black Halo Racing's original product offerings, and have the "BHR" logo milled on them. The pre-assembled bushings are equally suited for use on the street or on the racetrack and cause minimal changes in cabin NVH (noise, vibration, harshness).

    The Black Halo Racing Performance Motor Mounts come with everything needed to perform a comprehensive motor mount swap on your Mazda RX-8, they install in the same fashion as do the OEM motor mounts, will last substantially longer than the factory units, and fit all versions of the Mazda RX-8.

    For racers concerned with rules compliance; the OEM mounts weigh 1 lb., 13 oz. each while the BHR Motor Mounts weigh 2 lbs. each.
    Essex Rotary “Racing Beat” Sensor Adapter

    Essex Rotary “Racing Beat” Sensor Adapter

    This simple sensor adapter is designed to be used when installing the Racing Beat oil sandwich plate or coolant hose adapter. Specifically w ...

    £ 7.50
    add to cart
    show details
    This simple sensor adapter is designed to be used when installing the Racing Beat oil sandwich plate or coolant hose adapter. Specifically when using certain sensors that have the standard US style 1/8 npt thread instead of the larger size that is machined in to the Racing Beat parts.
    Made from high grade aluminium with an blue anodized finish.

    For either of the Racing Beat parts you will need one of these adapters.

    We recommend using a little PTFE tape on the threads to help with sealing.
    Essex Rotary Enhanced Tail Light Gasket Set for 04-08 RX-8

    Essex Rotary Enhanced Tail Light Gasket Set for 04-08 RX-8

    After nearly a year of development we are please to release the Essex Rotary upgraded tail light gaskets just in time for winter.

    ...

    £ 34.99
    add to cart
    show details
    After nearly a year of development we are please to release the Essex Rotary upgraded tail light gaskets just in time for winter.

    These gaskets are made from high quality neoprene instead of the the thin sponge of the Mazda OEM gaskets.

    The price for Mazda Original Gaskets are £34.28 EACH, the Essex Rotary Gaskets represent around a 50% saving over the Mazda Gaskets.

    For a limited period of time we are offering these with free shipping.
    PIAA Silicone Wiper Super Silicone Sporza 20″

    PIAA Silicone Wiper Super Silicone Sporza 20″

    PIAA Size - 10s
    The Super Sporza Silicone Wiper uses the same frame and blade te ...

    £ 27.95
    add to cart
    show details

    PIAA Size - 10s
    The Super Sporza Silicone Wiper uses the same frame and blade technology as the Super Silicone Wipers, with the added Aerodynamic Spoiler to reduce lift at high driving speeds. At high speeds or in windy conditions, the spoiler keeps the blade on the windshield. PIAA Super Sporza Wipers are available in a flat black finish.

    • Aerodynamic Spoiler Reduces Lift
    • Activated Silicone-Coating Action
    • Revolutionary Beading Action
    • Highest Quality Silicone Rubber Compound
    This size will fit the following vehicles. RX-8 Drivers Side RX-7 FD3s Drivers and Passenger Side RX-7 FC3s Drivewrs Side (if no spoiler is present on the wiper arm) and Passenger side    
    PIAA Super Silicone Wiper 18″

    PIAA Super Silicone Wiper 18″

    PIAA Size - 7
    PlAA offers a new clarity of vision - the Super Silicone Wiper Blade. From ...

    £ 22.95
    add to cart
    show details
    PIAA Size - 7
    PlAA offers a new clarity of vision - the Super Silicone Wiper Blade. From the initial design process to extensive laboratory testing under the harshest conditions, this blade outperforms every other blade currently on the market:  
    • The Super Silicone Wiper Blade secures a wider field of vision in inclement weather, ensuring greater visibility.
    • The Super Silicone Wiper Blade offers better resistance to all climates - heat, ozone, ultra-violet, and wear - clearly outperforming the industry standard.
    • Super Silicone coating elimates squeak and reduces drag, regardless of the shape of the windshield, providing greater comfort for both driver and passenger.
    • The Super Silicone Wiper Blade maintains a sharp, clean edge, even after 230,000 operations.As you can see, PIAA has engineered unparalleled effectiveness and streamlined operation into every blade - qualities that ensure superior performance.
    This size will fit the following vehicles. RX-8 Passenger Side RX-7 FD3s Rear Window RX-7 FC3s Rear Window
    RE-Amemiya triple 60mm Gauge Pod in Carbon for RX-8 2003-2008

    RE-Amemiya triple 60mm Gauge Pod in Carbon for RX-8 2003-2008

    This is a triple 60mm gauge pod from the rotary tuning legend RE-Amemiya Made from Carbon Fiber this pod fastens to the center console wher ...

    £ 299.99
    add to cart
    show details
    This is a triple 60mm gauge pod from the rotary tuning legend RE-Amemiya Made from Carbon Fiber this pod fastens to the center console where you would normally find the factory Sat-Nav screen Please note this pod will not work if you have a factory Sat-Nav installed and is only compatible with the Series 1 RX-8 2004-2008. Please allow up to 28 days for delivery of this part if not in stock. Gauges not included
    RE-Amemiya Triple 60mm Gauge Pod in FRP for RX-8 2003-2008

    RE-Amemiya Triple 60mm Gauge Pod in FRP for RX-8 2003-2008

    This is a triple 60mm gauge pod from the rotary tuning legend RE-Amemiya Made from FRP and finished in gloss black this pod fastens to the ...

    £ 244.99
    add to cart
    show details
    This is a triple 60mm gauge pod from the rotary tuning legend RE-Amemiya Made from FRP and finished in gloss black this pod fastens to the center console where you would normally find the factory Sat-Nav screen Please note this pod will not work if you have a factory Sat-Nav installed and is only compatible with the Series 1 RX-8 2004-2008. Please allow up to 28 days for delivery of this part if not in stock. Gauges not included.
    HKB Wheel Boss with Air Bag Canceler for RX-8

    HKB Wheel Boss with Air Bag Canceler for RX-8

    Genuine HKB Steering Wheel Boss kit Direct from Japan, These Bosses are purpose designed for their application are are drilled to for both p ...

    £ 79.99
    add to cart
    show details
    Genuine HKB Steering Wheel Boss kit Direct from Japan, These Bosses are purpose designed for their application are are drilled to for both patterns of wheel.
    • Momo,Sparco,OMP
    • NArdi,Personal
    This RX-8 boss also includes airbag cancelers to prevent the airbag fault light from coming on when you remove the OEM wheel and airbag. this kit will also retain the horn function, something that other cheap boss kits do not.
    Seibon Carbon Kevlar Bucket Seat Red or Black

    Seibon Carbon Kevlar Bucket Seat Red or Black

    Carbon Kevlar Bucket Seat from SEIBON

    Seibon Carbon components are carefully hand-crafted using only the finest materials. Ou ...

    £ 599.99
    add to cart
    show details
    Carbon Kevlar Bucket Seat from SEIBON

    Seibon Carbon components are carefully hand-crafted using only the finest materials. Our production team offers superior craftsmanship with over 15 years of experience working with carbon fibre.

      SeibonCarbonKevlarBucketSeatRed470px
    SEIBON parts are special order only so please contact us for estimated delivery times if your in a hurry for your part. Due to the nature of these products being hand made we are unable to offer a guarenteed estimated lead time for delivery once your order is placed.
    Takata Tow Strap

    Takata Tow Strap

    Genuine Takata Towing Strap in a choice of either Green or Black

    TAKATA Tow Strap with bendable stainless steel bolt-on hardw ...

    £ 24.99
    add to cart
    show details
    Genuine Takata Towing Strap in a choice of either Green or Black

    TAKATA Tow Strap with bendable stainless steel bolt-on hardware for up to 7/16“ or max 12 mm bolt. Fixed length at 170 mm (length of the strap). Capable of pulling over 1800 kg (4000 lbs) and meets German DMSB standard (2006 Technical Standards and Definitions: Safety - Part J) for minimum size towing straps. Can be universally mounted at the front or rear of most vehicles.

    takata-tow-strap-green-Black400px

    Please select your color choice from the drop down menu.

    Please allow up to 28 days for delivery if out of stock.
    Takata 2″ Harness Shoulder Pads

    Takata 2″ Harness Shoulder Pads

    Genuine Takata Harness pads in either Green of Black

    TAKATA 2-inch Shoulder Pads. These 2" pads have been designed for use wi ...

    £ 69.99
    add to cart
    show details
    Genuine Takata Harness pads in either Green of Black

    TAKATA 2-inch Shoulder Pads. These 2" pads have been designed for use with either factory 3 point harnesses, or 2" shoulder webbing on a Drift II. Takata have designed their harness pads to spread the load and cushion underneath the harness strap to provide extra comfort to the driver or passenger. Very soft and luxurious fabric on the outside, filled with foam for ultimate comfort. To attach the harness pads you simply wrap them around the strap of the harness then ensure the zip is zipped all the way up to provide a secure fit. Supplied as a pair.

      takata-2-harness-pads-green_400pxtakata-2-harness-pads-black_400px
    Please select your color choice from the drop down next to the add to cart button.

    Please allow up to 28 days for delivery if out of stock.
    Takata 3″ Harness Shoulder Pads

    Takata 3″ Harness Shoulder Pads

    Genuine Takata Harness Pads in either Green of Black

    TAKATA 3-inch Shoulder Pads. These 3" pads have been designed for use wi ...

    £ 63.99
    add to cart
    show details
    Genuine Takata Harness Pads in either Green of Black

    TAKATA 3-inch Shoulder Pads. These 3" pads have been designed for use with either factory 3 point harnesses, or 3" shoulder webbing on a Drift II. Takata have designed their harness pads to spread the load and cushion underneath the harness strap to provide extra comfort to the driver or passenger. Very soft and luxurious fabric on the outside, filled with foam for ultimate comfort. To attach the harness pads you simply wrap them around the strap of the harness then ensure the zip is zipped all the way up to provide a secure fit. Supplied as a pair.

      takata-3-harness-pads-green-400pxtakata-3-harness-pads-black-400px
    Please select your color choice from the drop down menu next to the add to cart button.

    Please allow up to 28 days for delivery it item is out of stock.
    NRG Quick Release Hub Gen 2.0 Black

    NRG Quick Release Hub Gen 2.0 Black

    The NRG generation 2.0 Quick Release features many options that conventional ball-locking quick release system do not. The Generation 2.0 is ...

    £ 129.99
    add to cart
    show details
    The NRG generation 2.0 Quick Release features many options that conventional ball-locking quick release system do not. The Generation 2.0 is specially engineered with raised sections to prevent the scratching and stretching of the hub while a self locking feature adds increased safety and functionality. Features a black body with Black ring for added style and look. Each unit is made from the highest quality aircraft grade aluminum and is anodized for maximum durability and finish. NRGQuickReleaseGen2.0BlackBlack300px

    Other color options available upon request.

    NRGLogoBlack300px
    NRG Quick Release Hub Gen 2.0 Carbon

    NRG Quick Release Hub Gen 2.0 Carbon

    The NRG generation 2.0 Quick Release features many options that conventional ball-locking quick release system do not. The Generation 2.0 is ...

    £ 139.99
    add to cart
    show details
    The NRG generation 2.0 Quick Release features many options that conventional ball-locking quick release system do not. The Generation 2.0 is specially engineered with raised sections to prevent the scratching and stretching of the hub while a self locking feature adds increased safety and functionality. Features a black body with Black ring for added style and look. Each unit is made from the highest quality aircraft grade aluminum and is anodized for maximum durability and finish. NRGQuickReleaseGen2.0BlackCarbon300pxThe Carbon Hub is finished in real high gloss carbon fibre, not simply a cheap quality wrap. Other color options available upon request. NRGLogoBlack300px
    NRG Short Steering Wheel Boss Kit

    NRG Short Steering Wheel Boss Kit

    Used to install aftermarket steering wheels on to your standard steering column, These short hubs are the perfect choice if you want keep th ...

    £ 109.99
    add to cart
    show details
    Used to install aftermarket steering wheels on to your standard steering column, These short hubs are the perfect choice if you want keep things compact when installing with a quick release, a deep dish (corn)  wheels or both. NRGLogoBlack300px NRG Innovation has developed another complement to our quick release steering kits. These units were designed specially so that an aftermarket steering wheel installed with the quick release kit still mounts in the same location, not too close to the driver. Made from the highest quality aluminum. Our Short Hubs are made to work with our Quick Release Products. This product is designed utilizing one piece solid construction for the maxim in durability and usability Compatible with RX-7, Rx-8 and MX-5. NRGShortBossMazda300px
    Project Mu Racing Floating Nut Set

    Project Mu Racing Floating Nut Set

    Project Mu's new Racing Floating Nut set with floating aluminum collar deployed on nut taper, this super-light and hard nut works to improve ...

    £ 189.99
    add to cart
    show details
    Project Mu's new Racing Floating Nut set with floating aluminum collar deployed on nut taper, this super-light and hard nut works to improve contact with the wheel and prevent loose screws. Made From Chromium-molybdenium steel/SCM435, with Aluminum cap, each pack contains 20 wheel nuts plus 1 socket adapter. These wheel nuts will fit all Mazdas. ProjectMuDealerLogo270px  
    Project Mu Super 7 Lock Nut Set

    Project Mu Super 7 Lock Nut Set

    This high-strength nut has a heptagonal shape that prevents removal with ordinary tools, thus protecting your wheels from theft. Made Fro ...

    £ 119.99
    add to cart
    show details
    This high-strength nut has a heptagonal shape that prevents removal with ordinary tools, thus protecting your wheels from theft. Made From Chromium-molybdenium steel/SCM435, with Aluminum caps, each set comes with 20 wheel nuts and 1 socket adapter. ProjectMuDealerLogo270px
    Innovate MTX-L 52mm Digital Wideband Air-Fuel Ratio Gauge

    Innovate MTX-L 52mm Digital Wideband Air-Fuel Ratio Gauge

    The new Innovate Motorsports Digital MTX Series Air/Fuel Ratio Gauge utilizes the only 100% digital Wideband air/fuel ratio technology on th ...

    £ 179.99
    add to cart
    show details
    The new Innovate Motorsports Digital MTX Series Air/Fuel Ratio Gauge utilizes the only 100% digital Wideband air/fuel ratio technology on the market! The award-winning patented DirectDigital™ technology we use is faster and more accurate than common “UEGO” gauges and is now more affordable! In addition, the gauge features a water resistant casing, interchangeable faceplates and bezels, and 2 fully programmable linear analog outputs for use with aftermarket engine managements systems and dataloggers!

    • Patented DirectDigital™ wideband sensor control, the only 100% digital wideband air/fuel ratio technology!
    • Digital display in AFR or Lambda
    • 52mm (2 1/6”) diameter gauge body
    • Built-in Direct Digital™ Wideband Controller reduces wiring and simplifies installation
    • Wideband O2 Sensor is compatible with all fuel types (Leaded, Unleaded, Diesel, Methanol, E85, etc)
    • Ability to calibrate O2 sensor for increased accuracy
    • (2) Configurable linear 0-5v analog output for wideband O² for use with piggy back or stand alone ECU’s as well as external data loggers
    • Interchangeable faceplates and bezels: Black and silver bezel, black and white faceplates included
    • Large digital readout and programmable “Digital Needle” provides the functionality of a needle style gauge with the pinpoint accuracy of a digital display
    • Datalog using LogWorks on your PC
    • Innovate MTS serial in/out (for use with other Innovate & 3rd party MTS enabled devices to add additional logging channels)
    InnovateMTX-LDisplayDataSheet300px InnovateMTX-LTrio500px Installation and Setup Installation of the MTX-L is relatively simple. Complete documentation is supplied, and the support pages, videos, application notes and tuner resources can also speed you on your way to effective tuning. Innovate also has a great network of local dealers, tuners, race shops, and dyno shops that can assist you in choosing, installing, and getting the most out of your Innovate products.
    ClimAir Wind Deflectors for RX-8

    ClimAir Wind Deflectors for RX-8

    Sold as a pair these popular Wind deflectors have been popular for many reasons. The ClimAir deflectors allow you to open your front window ...

    £ 44.99
    add to cart
    show details
    Sold as a pair these popular Wind deflectors have been popular for many reasons. The ClimAir deflectors allow you to open your front windows slightly to improve airflow while keeping wind noice to a minimum.

    Sold as a pair.

    These are usually in stock in the UK however if you require your deflectors quickly please contact us prior to placing your order so we can confirm stock availability.
    Project Mu Magnetic Sump Plug Bolt

    Project Mu Magnetic Sump Plug Bolt

    Magnetic drain plug by Project Mu Japan.
    These are a popular swap during an oil change.

    Magnetic drain bolts help coll ...

    £ 28.99
    add to cart
    show details
    Magnetic drain plug by Project Mu Japan.
    These are a popular swap during an oil change.

    Magnetic drain bolts help collect and trap magnetic metal particles from within your oil. this can help to keep your oil cleaner for longer between oil changes.

    Each drain bold comes with 2 crush washers.
    NRG Quick Release Hub Gen 2.5 Black

    NRG Quick Release Hub Gen 2.5 Black

    NRG Quick Release. The Gen 2.5 Quick Release utilises all the features of the Second Generation Systems ball-locking quick release system en ...

    £ 137.99
    add to cart
    show details
    NRG Quick Release. The Gen 2.5 Quick Release utilises all the features of the Second Generation Systems ball-locking quick release system engineered with raised sections to prevent the scratching and stretching of the hub while a self locking feature adds increased safety and functionality, with the added benefit of an upgraded flared ring. This allows much easier release for the steering wheel by providing added leverage and grip onto the pull ring. Features a black body with a black ring for added style and look to any vehicle. Perfect for race applications where the use of gloves are required. NRGQuickReleaseGen2.5-500px

    Other color options available upon request.

    NRGLogoBlack300px
    TRUST GReddy Lightweight Pulley Kit for RX-8 04-08

    TRUST GReddy Lightweight Pulley Kit for RX-8 04-08

    Greddy Lightweight Aluminum Pulley Kit made from billet aluminum and anodized in blue, Greddy Pulley kits reduce rotating mass. Its blue ano ...

    £ 164.99
    add to cart
    show details
    Greddy Lightweight Aluminum Pulley Kit made from billet aluminum and anodized in blue, Greddy Pulley kits reduce rotating mass. Its blue anodized appearance also dresses up the engine bay with show quality finish.
    Kit Includes Water-pump and Alternator Pulleys. Supports factory crank Pulley. For Mazda RX-8

    TRUSTGreddyPulleyKitRX8-500px

    Please note that delivery may take between 4-6 weeks if not in stock at time of ordering.
    R3 Style LED Tail Light Cluster Set for 2004-2008 RX-8

    R3 Style LED Tail Light Cluster Set for 2004-2008 RX-8

    These high quality LED Tail Light clusters are styles to look like the Later R3 style tail lights. However unlike the R3 Lights these are de ...

    £ 249.99
    add to cart
    show details
    These high quality LED Tail Light clusters are styles to look like the Later R3 style tail lights. However unlike the R3 Lights these are designed to fit the Series 1 RX-8 chassis without need for modification.

    Made to a high OEM Quality These units are a direct fit and feature ultra bright high intensity LED's for superior visibility over the standard bulbs found in the series 1 light clusters.

    R3LookLEDTailLightsRX8-300px These units are a full conversion and require no modification or transfer of parts from your existing lights.
    Simple to install, Just unbolt your original units and then bolt these in to place, no hassle and no fuss.
    These Units come with the clear lens for superior visibility even during the day.

    Usually in stock but please check prior to ordering if you need these urgently.

    LED 3rd Brake Light for RX-8

    LED 3rd Brake Light for RX-8

    Essex Rotary will be releasing a LED 3rd brake light for your RX-8 to compliment our R3 Style LED Tail Light Cluster Set.

    If yo ...

    £ 49.99
    add to cart
    show details
    Essex Rotary will be releasing a LED 3rd brake light for your RX-8 to compliment our R3 Style LED Tail Light Cluster Set.

    If you are installing this in conjunction with our R3 Style LED Tail Lights you will require the installation of a resistor in the loom to prevent the warning light illuminating on the dash

    Color options will be Clear and Smoked Lens.

    Currently only available in Smoked. This will fit all models of RX-8 from 2003 - 2013
    PIAA Xtreme White H9 Bulb Set (Full Beam)

    PIAA Xtreme White H9 Bulb Set (Full Beam)

    PIAA's Extreme White H9 bulbs use the standard 65w of power however they output the equivalent of 120w of light power. This bulb set will f ...

    £ 74.99
    add to cart
    show details
    PIAA's Extreme White H9 bulbs use the standard 65w of power however they output the equivalent of 120w of light power. This bulb set will fit the high beam of your Mazda RX-8 Xtreme White Bulbs represents the latest technology in bulbs from PIAA. As the name implies these bulbs are XTREME Upgrade your bulbs for a brilliant XTREME cool white light. The closest colour yet to H.I.D. lamp systems at a fraction of the cost Brilliant in colour and radical in technical performance, these bulbs elevate your car's road profile to a new level no matter what you drive. Please note that these bulbs are now E-Marked so are intended for Off Road Use Only Sold as a Pair
    PIAA Xtreme White Plus H7 Bulb Set (Dipped Beam for 192ps RX-8)

    PIAA Xtreme White Plus H7 Bulb Set (Dipped Beam for 192ps RX-8)

    PIAA's Extreme White Plus are possibly the brightest bulbs on the market, The H7 fits the dipped beam on the 192 RX-8 Lamp units. putting ou ...

    £ 59.99
    add to cart
    show details
    PIAA's Extreme White Plus are possibly the brightest bulbs on the market, The H7 fits the dipped beam on the 192 RX-8 Lamp units. putting out an equivilent of 110watts of light

    These bulbs will provide a brilliant Xtreme cool white light that will light up road hazards and street signs long before a normal halogen bulb.

    Xtreme White Plus bulbs achieve something few other high-performance bulbs can - and that’s deliver a stunning performance whilst complying with European regulations. Surprisingly only drawing 65/55 watts power, the bulbs convert the output of light to an equivalent of 110/100 watts, appearing far brighter than standard Halogen or Xenon units by emitting a crisp, blue-white, far-reaching beam.

    Sold as a pair
    PIAA Xtreme White T20 Capless Single Filiment Bulb Set

    PIAA Xtreme White T20 Capless Single Filiment Bulb Set

    PIAA's Extreme White T20 bulbs use the standard power however they output light equivalent to a much more powerful bulb. This bulb set will ...

    £ 15.50
    add to cart
    show details
    PIAA's Extreme White T20 bulbs use the standard power however they output light equivalent to a much more powerful bulb. This bulb set will fit the following arras of your Mazda RX-8.
    • Reverse Lamps
    • 3rd Brake Light
    • Fog Rear Fog Lamp
    Xtreme White Bulbs represents the latest technology in bulbs from PIAA. As the name implies these bulbs are XTREME

    Upgrade your bulbs for a brilliant XTREME cool white light. The closest colour yet to H.I.D. lamp systems at a fraction of the cost

    Brilliant in colour and radical in technical performance, these bulbs elevate your car's road profile to a new level no matter what you drive.

    Please note that these bulbs are now E-Marked so are intended for Off Road Use Only

    Sold as a Pair
    PIAA Xtreme White T20 Capless Stop/Tail Lamp Bulb Set

    PIAA Xtreme White T20 Capless Stop/Tail Lamp Bulb Set

    PIAA's Extreme White T20 bulbs use the standard power however they output light equivalent to a much more powerful bulb. This bulb set will ...

    £ 18.50
    add to cart
    show details
    PIAA's Extreme White T20 bulbs use the standard power however they output light equivalent to a much more powerful bulb. This bulb set will fit the following arras of your Mazda RX-8.
    • Stop/Tail Light
    Xtreme White Bulbs represents the latest technology in bulbs from PIAA. As the name implies these bulbs are XTREME

    Upgrade your bulbs for a brilliant XTREME cool white light. The closest colour yet to H.I.D. lamp systems at a fraction of the cost

    Brilliant in colour and radical in technical performance, these bulbs elevate your car's road profile to a new level no matter what you drive.

    Please note that these bulbs are now E-Marked so are intended for Off Road Use Only

    Sold as a Pair
    PIAA LED 6600K W5W 501 Capless Wedge Lamps

    PIAA LED 6600K W5W 501 Capless Wedge Lamps

    PIAA leads the market with LED Bulbs that provide extremely low power consumption and very long life. Standard bulb fittings for easy instal ...

    £ 36.00
    add to cart
    show details
    PIAA leads the market with LED Bulbs that provide extremely low power consumption and very long life. Standard bulb fittings for easy installation and up to 6 LEDs per bulb for High Intensity.

    These capless wedge lamps are ideal for most of the small lamps found in the interior and exterior or your RX

    On the RX8 you can find this fitting bulb in the following locations
    • Sidelights
    • Puddle Lights
    • Interior Map Lights
    • Glovebox
    • Door Lights (the small ones on the bottom of the rood that light up when open)
    • Numberplate Lamps
    • Boot Light
    On the FD3s Your will find them in the following locations
    • Sidelight Markers (on some model lamps)
    • Interior Lights
    • Numberplate Lamps
    These LED units use a 1Watt LED putting out 85Lumins of crisp white light.

    Please note these are not road legal, and are intended for off road and show use only.

    Sold in pairs
    PIAA Super Tera Evolution 6000K Wedge W5W T10 LED Set

    PIAA Super Tera Evolution 6000K Wedge W5W T10 LED Set

    PIAA's Top of the line LED Sidelight W5W capless wedge unit. PIAA leads the market with LED Bulbs that provide extremely low power consumpt ...

    £ 66.99
    add to cart
    show details
    PIAA's Top of the line LED Sidelight W5W capless wedge unit. PIAA leads the market with LED Bulbs that provide extremely low power consumption and very long life. Standard bulb fittings for easy installation and up to 6 LEDs per bulb for High Intensity. Super Tera operate at 6000 Kelvin giving a brilliant white/blue light at up to 18 times the brightness These capless wedge lamps are ideal for most of the small lamps found in the interior and exterior or your RX On the RX8 you can find this fitting bulb in the following locations
    • Sidelights
    • Puddle Lights
    • Interior Map Lights
    • Glovebox
    • Door Lights (the small ones on the bottom of the rood that light up when open)
    • Numberplate Lamps
    • Boot Light
    On the FD3s Your will find them in the following locations
    • Sidelight Markers (on some model lamps)
    • Interior Lights
    • Numberplate Lamps
    These LED units use a 1Watt LED putting out 85Lumins of crisp white light. Please note these are not road legal, and are intended for off road and show use only. Sold in pairs
    RE-Amemiya Quick Shifter Knob Black

    RE-Amemiya Quick Shifter Knob Black

    Black Heavy weight Shift knob from the rotary tuning legends of Japan RE-Amemiya.

    These Shift knobs are even heavier than the ...

    £ 99.99
    add to cart
    show details
    Black Heavy weight Shift knob from the rotary tuning legends of Japan RE-Amemiya.

    These Shift knobs are even heavier than the standard shift knob

    Weight :480 grams

    RE-AmemiyaQuickShiftKnobBlack500px

    Available with or without a replacement brass shift collor.

    TRUST GReddy Informeter Touch

    TRUST GReddy Informeter Touch

    Greddy's Informeter Touch is an advanced engine monitoring system, with a color touch screen.
    This unit is simply a plug and play u ...

    £ 349.99
    add to cart
    show details
    Greddy's Informeter Touch is an advanced engine monitoring system, with a color touch screen.
    This unit is simply a plug and play unit. It directly plugs into the OBD port and the 12V cigarette light plug. The infometer touch works with most vehicles, depending on certain vehicles the unit can display a large list of factory ecu signal items. The infometer can estimate power with weight/acceleration run, estimate fuel economy and cost in eco mode, data log up to 15 minutes of info, read and reset diagnostic trouble codes.

    TRUSTTReddyInfoMeterTouchPackage500px

    Features

    • Up to 53 Items possible
    • 3.5” TFT color touch screen
    • ISO 14230, CAN, Non OBD
    • 3-way display direction
    • 6 read-out styles: Digital, Bar meter, Needle meter, Circle bar, Graph, Chart

    Intelligent Infometer Touch

    • 5 display patterns: Couple, Tandem, Lord/Tenant, Couple/3 Fold, 6 Fold

    Intelligent Infometer Touch

    • DTC – Diagnostic Trouble Code: Reading & Resetting (depending on vehicle.)
    • 15 minute dataloging & playback
    • English or Japanese language
    • Metric or SAE measurements
    • Eco-drive, Fuel Economy, Power estimators

    Intelligent Infometer Touch

    • GReddy v-manage, f-manage compatible
    • External Signal monitoring possibilities
    • Programmable Warning Alarms (visual/audio)
    • Programmable Max/Min Scales
    • Peak Hold Memory (LO / HI)
    • Selectable background patterns

    Intelligent Infometer Touch

    • Day/Night settings
    • Size 75mm x 107mm x d16mm
    • Optional Sensor Adapter
    • Boost Sensor, Pressure Sensor (oil/fuel), & Temp (oil/coolant)

    Intelligent Infometer TouchIntelligent Infometer Touch


    Expansion modules, Non OBD harnesses, sensors etc are all available separately upon request.

    This is not a stock item and is special order only at this time, delivery can be up to 6 weeks.
    AEM UEGO Digital Wideband Air-Fuel Ratio Gauge (52mm)

    AEM UEGO Digital Wideband Air-Fuel Ratio Gauge (52mm)

    Our World-famous Wideband O2 air/fuel ratio UEGO gauge features a digital LED display and sweeping LED 'needle' that changes colors as AFR c ...

    £ 219,99
    add to cart
    show details
    Our World-famous Wideband O2 air/fuel ratio UEGO gauge features a digital LED display and sweeping LED 'needle' that changes colors as AFR changes from rich to lean. A 52mm (2-1/16") gauge housing ensures that it will fit in most gauge pods and can be remotely mounted virtually anywhere. All AEM digital gauges feature a 0-5v analog output for use with data loggers and almost any engine management system. Each gauge comes with black and silver bezels and black and white faceplates for multiple color combinations and a custom look (a black Lambda faceplate and black and white Air/Fuel Ratio faceplates). Note: No Warranty can be given on the Lambda Sensor

    AEMUEGOHeader30-4110-500px

    The Bosch UEGO sensor gives the controller its speed and accuracy. The Bosch 4.9 LSU sensor used in the 30-4110 AEM Wideband UEGO AFR Controller Gauge has a faster light off time and draws less current than the 4.2 LSU sensor used with AEM’s 30-4100 Wideband UEGO Controller Gauge, which will be superseded to the 30-4110 gauge in August, 2014. The 4.9 LSU sensor features the same fuel compatibility as the 4.2 LSU and NEVER requires free-air calibration when used with AEM’s 30-4110 Wideband UEGO AFR Gauge. The 30-4110’s 4.9 LSU sensor uses a different connector than the connector used with the 4.2 LSU sensors included with the original 30-4100 gauge controller. The sensors are not interchangeable between the two gauge controllers in any way, including changing connectors on the gauges.

    AEMGaugeExploded500px

    The Wideband O2 air/fuel ratio UEGO gauge is a must if you want to maximize your engine's power and safety. When tuning an engine, accurate air/fuel ratio data is critical because running with too rich of aNo warranty for the Lambda Sensor**n AFR can cause a loss of power, and running a lean AFR can result in serious engine damage. AEM's digital Wideband AFR UEGO gauge can quickly alert you to even a .1 change in air/fuel ratio and provide enough time to shut down an engine before damage occurs.
    • Interchangeable black and white faceplates included for customizing gauge appearance (digital gauges only)
    • Bosch 4.9 LSU wideband sensor and weld-in bung included (PN 30-4110)
    • No free air sensor calibration required - ever
    • Interchangeable black and silver bezels included
    • Interchangeable black and white faceplates included
    • 52mm (2-1/16”) gauge housing
    • 0-5v analog output (10-20 AFR range only)
    AEM’s legendary Digital Wideband O2 AFR UEGO Gauge is a wideband UEGO air/fuel ratio controller (AFR) and gauge in one. It unites accuracy, speed and control with an easy to read, digital LED display and sweeping LED “needle” that changes colors as AFR changes from rich to lean.

    AEM30-4110UEGOWidebandARFGauge52mmFaceOptions400px

    WHAT IS A WIDEBAND UEGO AIR/FUEL CONTROLLER? AEM's Wideband UEGO (Universal Exhaust Gas Oxygen, pronounced “You-Way-Go”) Controllers are powerful, cost effective tuning tools that allow users to accurately monitor the Air/Fuel Ratio (AFR) of their engine.

    WHY USE A WIDEBAND AIR/FUEL CONTROLLER?
    Accurate AFR data is critical when tuning an engine. Running rich (very low air/fuel ratio, excessive fuel) can cause a loss in power, while running too lean (very high air/fuel ratio, not enough fuel) may result in serious engine damage. Using a wideband air/fuel controller during the tuning process allows you to monitor AFR and adjust tuning parameters to optimize them for maximum power and efficiency. AEM has a comprehensive line of highly accurate, reliable wideband air/fuel controllers that can help ensure your vehicle is optimally tuned.

    WHAT IS FREE-AIR CALIBRATION?
    Some of our competitors require that you frequently perform a free-air calibration procedure to calibrate their O2 sensors. This process involves removing the sensor from the bung while still connected to the controller device, then waving the sensor in the air so it can read atmospheric O2 levels. We use Bosch 4.9 LSU sensors in our wideband controllers. Our sensors are individually laboratory-calibrated by Bosch and never require free air calibration!

    CAN I CHANGE THE AEM UEGO SENSOR’S CONNECTOR?
    No. There is a laser-etched, calibrated resistor in the sensor’s connector body. This resistor is specifically created for the exact sensor that it is attached to. Modifying this will invalidate the sensor’s output.
    CUSCO Aluminium Radiator Cooling Plate for RX-8

    CUSCO Aluminium Radiator Cooling Plate for RX-8

    A Stylish lightweight alternative to the OEM Plastic Panel made from Aluminium, CUSCO have finished this in their signature Blue.
    Th ...

    £ 114.99
    add to cart
    show details
    A Stylish lightweight alternative to the OEM Plastic Panel made from Aluminium, CUSCO have finished this in their signature Blue.
    They make an excellent dress up part for your RX-8 engine bay. They come in a 2 part design and use the original trim clips to fasten it in place.
    This plate mounts between the front bumper and the metal cross member at the front of the engine bay, and incloses the bonnet release latch.
    Mishimoto 850ml Aluminium Coolant Reservoir Tank (SOHN Tank)

    Mishimoto 850ml Aluminium Coolant Reservoir Tank (SOHN Tank)

    Ideal oil tank for your "SOHN" Install, being slim with a bottom feel outlet and cap with breather hole.

    Whether you want to ...

    £ 68.00
    add to cart
    show details
    Ideal oil tank for your "SOHN" Install, being slim with a bottom feel outlet and cap with breather hole.

    Whether you want to finish off the look of a tucked engine bay, or you just want to replace the dull, stock plastic tank, the Mishimoto aluminium Coolant Reservoir Tank is the perfect solution. Offered as a comprehensive kit, complete with a mounting bracket, hardware, and reinforced hose. Available in three colours, the Mishimoto aluminium Coolant Reservoir Tank is guaranteed to improve the aesthetics of your engine bay.

    Mishimoto850mlExpansionTank3Colors Material: 6061 Aluminium
    Tank Capatity : 850ml (0.85l)

    Dimensions are around 8.2inches high by 3 inches across.

    The Outlet barb is ideal for AN-06 braided hose or 8mm oil sesistant pipe (if your planning to use this for an SOHN install) Available in Polished Silver, Black or Red.

    The Cap has a rubber seal and also has an integral breather hole.

    A full hardware kit and coolant resistant hose included.

    Please note this tank is a universal item so may require fabrication of additional bracket in order to fit your chosen vehicle and location in that vehicle.

    Shopping Cart

    WORLD LEADERS

     

    Shop categories

    Current Time
    We are CLOSE
    We are closed now. We can not answer your emails now.
    Opening in 6 hr 19 mins
    ajax
    ajax