REMEMBER TO CHOOSE THE CORRECT SHIPPING OPTION BEFORE ADDING ITEMS TO THE CART!

Varta Battery for RX-7 and RX-8

Varta Battery for RX-7 and RX-8

PLEASE REMEMBER THIS ITEM IS FOR COLLECTION ONLY

High battery made by Varta, to fit the following models.
> Mazda RX ...

£ 82.00
add to cart
show details
PLEASE REMEMBER THIS ITEM IS FOR COLLECTION ONLY

High battery made by Varta, to fit the following models.
> Mazda RX-7 FC3s
> Mazda RX-7 FD3s
> Mazda Rx-8

Battery Performance Data
> Voltage - 12 volts
> Capacity - 60Ah
> Cold Cranking Amps - 540CCA

Varta Batteries are made in the same factory as the popular Bosch battery. to the same specification.
This Varta batteries delivery of high CCA means it delivers adequate cranking power to start your car on even the coldest temperatures.
These Varta batteries are great quality and have been used on Essex Rotary cars without fail for many years. Please Select your preference from the drop down below.

FOR COLLECTION ONLY, DUE TO THE FACT THESE BATTERIES ARE LEAD ACID FILLED AND HAVE SEVERE COURIER RESTRICTIONS.
ODYSSEY PC680 Dry Cell Battery

ODYSSEY PC680 Dry Cell Battery

12 volt drycell battery delivery a whopping 680 Pulse Cranking Amps

ODYSSEY Extreme Series Battery Model PC680
(intern ...

£ 99.99
add to cart
show details
12 volt drycell battery delivery a whopping 680 Pulse Cranking Amps

ODYSSEY Extreme Series Battery Model PC680
(internal threaded brass terminals, M6 SS bolts, and L bracket adapter)

Powersport vehicles need a powerful battery that's built to take the constant pounding that comes with the territory, whether it's is on land, sea, or snow.

The ODYSSEY battery can handle it. Featuring rugged construction and packed tightly with pure lead plates, the non-spillable AGM design ODYSSEY battery protects against the shock and vibration that can quickly destroy other batteries. And the pure lead plates mean more power-twice the overall power and three times the life of conventional batteries-up to 400 cycles at 80% depth of discharge!

Specification
  • AGM Technology
  • 170CCA
  • 16Ah
  • Reserve Capacity 24 Minutes
  • Dimensions 181.5(L) x 76.3(W) x 167.8(H)
  • Weight 7Kg
  • Terminals M6 Threaded Terminals (fasteners included)
Please note that due to the nature of these small lightweight batteries they may not be suitable for vehicles with a large electrical drain that are left for extended periods without being used.

OdysseyPC680Battery400px The PC680 will require a terminal kit if you with to use traditional battery terminals with it.
OPTIMA Red Top 35R Dry Cell Battery

OPTIMA Red Top 35R Dry Cell Battery

A popular battery upgrade for your standard battery bringing unrivaled 720CCA starting power to your car. whilst shaving some weight from yo ...

£ 169.99
add to cart
show details
A popular battery upgrade for your standard battery bringing unrivaled 720CCA starting power to your car. whilst shaving some weight from your car. OPTIMA® REDTOP® 35 Ultra high-performance SPIRALCELL TECHNOLOGY® AGM (absorbent glass mat) battery with reliable cranking power for your auto, car or truck and twice the life. The OPTIMA® REDTOP® will outperform and outlast traditional batteries in demanding cranking/starting applications. The ultimate high-CCA starting battery for vehicles that have alternators capable of keeping up with all electrical loads. BENEFITS OF THE REDTOP®:
  • Strongest five-second starting burst
  • Up to two times longer life
  • More than 15 times the vibration resistance
  • Completely spillproof, mountable in virtually any position
  • Maintenance-free
  • Faster recharging
  • Optimal starting power

Performance Data

Cold Cranking Amps: 720
Cranking Amps: 910
Nominal Voltage: 12 volts
Open Circuit Voltage (fully charged): 12.8 volts
Internal Resistance (fully charged): 0.0030 ohms
Capacity: 44 Ah (C/20)
Reserve Capacity: BCI: 100 minutes (25 amp discharge, 80°F (26.7°C), to 10.5 volts cut-off)
Dimensions: 239mm(L) x 172mm(W) x 190mm (H) inc terminals Weight: 14.4Kg

OptimaRedTop35RBattery400px Please note the optima 35R is a little shorter then the standard battery so a packer will be required raise the battery in its box for proper installation.  In times when the 35R may be out of stock we may substitute your order with the 3.7R (a near identical battery) to aid in getting your battery to you quickly.
NGK Spark Plug Set for RX-7 FB BR8ET

NGK Spark Plug Set for RX-7 FB BR8ET

Set of 4 Genuine NGK Spark Plugs for your RX-7 FB the part number for these plugs is BR8ET

Sold as a Set of 4

...

£ 42.00
add to cart
show details
Set of 4 Genuine NGK Spark Plugs for your RX-7 FB the part number for these plugs is BR8ET

Sold as a Set of 4

NGKLogot
MSD 8.5mm Super Conductor HT Lead Set for RX-7 FB

MSD 8.5mm Super Conductor HT Lead Set for RX-7 FB

Made to order right here at Essex Rotary using all MSD Components.

The MSD 8.5 mm Super Conductor wire is the performance wir ...

£ 89.99
add to cart
show details
Made to order right here at Essex Rotary using all MSD Components.

The MSD 8.5 mm Super Conductor wire is the performance wire engineered from the inside out, the 8.5mm offers everything you have ever wanted in a wire; incredibly low resistance without electronic interference! In a single 12 In. length of Super Conductor wire there is only 40 to 50 ohms of resistance! That is the lowest resistance of any helically wound wire. To accomplish this, MSD use a copper alloy conductor due to it's great voltage carrying capabilities. The low resistance results in less loss of spark energy so more reaches the spark plug. The conductor is wound extremely tight around a special center core. So tight, that there is over 40 Ft. of conductor wrapped into a single foot of plug wire. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective electro magnetic interference (EMI) choke.

MSDIgnitionLogo170px
  • Copper alloy conductor has a resistance value of less than 50 ohms per foot for superior spark
  • Ferro-magnetic impregnated core creates an effective EMI choke
  • Forty feet of conductor is wound into a single foot of wire for high EMI suppression
  • Conductor core features Dupont Kevlar material for increased tensile strength
  • Durable outer sleeve is a proprietary compound for resistance to high heat or abrasion
  • Stainless steel terminals feature dual crimp tabs to grip wire conductor and outer jacket separately
These MSD HT Leads are made to order right here at Essex Rotary HQ, from genuine MSD components. Available in Red or Black cable options (select your preferred color from the drop down menu before hitting the "add to cart" button.

Custom lengths and configurations available upon request.
MSD Ignition Blaster 2 High Performance Ignition Coil for RX-7 FB & FC EGI

MSD Ignition Blaster 2 High Performance Ignition Coil for RX-7 FB & FC EGI

A great upgrade option for your failed OEM coils on an early rotary engine.
MSD ignition Coil, Blaster 2, High Performance

£ 64.99

add to cart
show details
A great upgrade option for your failed OEM coils on an early rotary engine.
MSD ignition Coil, Blaster 2, High Performance

Blaster 2 Coil

MSDIgnitionBlaster2IgnitionCoil400px The blaster coils share the same special windings and high voltage output but do not include a ballast resistor.
When you are using an MSD Ignition control, the ignition is responsible for delivering the voltage to the coil so a ballast resistor is not necessary.
  • Low resistance and improved turns ratio produces a powerful spark for improved performance
  • Special windings and high voltage output; does not include a ballast resistor
  • Sturdy metal housing is finished in red
  • OBD II and CARB approved; legal for use in all states; D-40-37
MSD Ignition Blaster 2 High Performance Ignition Coil inc Ballest for RX-7 FB & FC EGI

MSD Ignition Blaster 2 High Performance Ignition Coil inc Ballest for RX-7 FB & FC EGI

An excellent upgrade for your old, tired or failed ignition coils in your RX-7 FB or FC ECI. These MSD coils offer very high voltage output ...

£ 69.99
add to cart
show details
An excellent upgrade for your old, tired or failed ignition coils in your RX-7 FB or FC ECI. These MSD coils offer very high voltage output of up to 45'000 volts.
MSD ignition Coil, Blaster 2, with Ballast and Hardware

Blaster 2 Coil, w/Ballast & Hardware

MSDIgnitionBlaster2IgnitionCoil&Hardware400px If you are looking to upgrade your stock coil or want to complement the performance of your MSD 6-Series Ignitions, our blaster coils are the right choice. For MSD Ignition applications. With a stock points style ignition, a ballast resistor must be placed in-line with the positive terminal of the coil. These blaster coils are supplied with a 0.8 ohm ballast resistor plus a terminal and boot to fit most applications. Mallory Melonite applications also require the ballast resistor.

  • Performance upgrade for canister style coils
  • High voltage and energy output
  • Improved materials and turns ratio
  • Improved performance
  • A performance upgrade for points
  • Comes with 0.8 ohm resistor; fits most applications
  • CARB approved legal for use in all states
  • Use with stock or MSD 6-Series Ignitions

Shopping Cart

WORLD LEADERS

 

Shop categories

ajax
ajax